บริการสอบเทียบของสถาบันมาตรวิทยาแห่งชาติ
Mechanical Metrology
Item No. |
Code |
Description |
Range |
Accuracy |
Remark |
Service |
|---|---|---|---|---|---|---|
1 |
10030 - 30201 |
Universal Testing Machine |
Up to 500 kN |
According to ISO 7500-1 : 2004 |
Calibrated by force-measuring device and ascessories shall be provided by customer |
On-site Calibration |
2 |
10040 - 30303 |
Static Torque Calibration devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
On-site Calibration |
|
3 |
10040 - 30302 |
Static Torque Calibration devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
On-site Calibration |
|
4 |
10040 - 30601 |
Adjustment charge of torque device for on-site calibration |
|
On-site Calibration |
||
5 |
10040 - 30501 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench |
40 N?m to 400 N?m |
MT 01/2550 |
On-site Calibration |
|
6 |
10040 - 30502 |
Inter-laboratoty comparison on torque with cross force'- Artifact: Torque wrench |
8 N?m to 40 N?m |
MT 01.1/2551 |
On-site Calibration |
|
7 |
10040 - 30503 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench calibrator |
10 N?m to 200 N?m |
MT 02/2551 |
On-site Calibration |
|
8 |
10040 - 30504 |
Inter-laboratoty comparison on torque with cross force- Artifact: Setting torque wrench |
20 N?m to 330 N?m |
MT 03/2553 |
On-site Calibration |
|
9 |
10050 - 30001 |
Extensometer |
Gauge length up to 200 mm |
According to ISO 9513 |
On-site Calibration |
|
10 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRA to 88 HRA |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
11 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRB to 100 HRB |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
12 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRC to 65 HRC |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
13 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HR15N to 94 HR15N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
14 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
42 HR30N to 86 HR30N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
15 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
67 HR15T to 93 HR15T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
16 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
29 HR30T to 82 HR30T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
17 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HRE to 100 HRE |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
18 |
10050 - 30202 |
Callibration of Testing Machine Vickers Hardness Testing Machine |
HV0.2, HV0.3, HV0.5, HV5, HV10, HV20, HV30, HV50 |
According to ISO 6507-2 |
Note * not including indenter calibration |
On-site Calibration |
19 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB10/3000, HB10/500, HB10/100 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
20 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB5/750, HB5/125, HB5/62.5 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
21 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB2.5/62.5, HB2.5/31.25, HB2.5/15.625 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
22 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB1/30 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
23 |
10050 - 30103 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale B |
MH01 |
On-site Calibration |
|
24 |
10050 - 30203 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale C |
MH02 |
On-site Calibration |
|
25 |
10050 - 30303 |
Inter-laboratory comparison on hardness measurement- Artifact hardness testing machine |
Rockwell Scale A, B and C |
MH03 |
On-site Calibration |
|
26 |
10050 - 30403 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
HV5, HV10 |
MH04 |
On-site Calibration |
|
27 |
10060 - 30101 |
Absolute Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 10 ?Gal (0.01 ppm) |
This price is for overseas customer; for domestic customer the price to be discussed |
On-site Calibration |
28 |
10060 - 30102 |
Local Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 180 ?Gal (0.18 ppm) |
Using relative method |
On-site Calibration |
29 |
10030 - 30201 |
Universal Testing Machine |
Up to 500 kN |
According to ISO 7500-1 : 2004 |
Calibrated by force-measuring device and ascessories shall be provided by customer |
On-site Calibration |
30 |
10040 - 30303 |
Static Torque Calibration devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
On-site Calibration |
|
31 |
10040 - 30302 |
Static Torque Calibration devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
On-site Calibration |
|
32 |
10040 - 30601 |
Adjustment charge of torque device for on-site calibration |
|
On-site Calibration |
||
33 |
10040 - 30501 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench |
40 N?m to 400 N?m |
MT 01/2550 |
On-site Calibration |
|
34 |
10040 - 30502 |
Inter-laboratoty comparison on torque with cross force'- Artifact: Torque wrench |
8 N?m to 40 N?m |
MT 01.1/2551 |
On-site Calibration |
|
35 |
10040 - 30503 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench calibrator |
10 N?m to 200 N?m |
MT 02/2551 |
On-site Calibration |
|
36 |
10040 - 30504 |
Inter-laboratoty comparison on torque with cross force- Artifact: Setting torque wrench |
20 N?m to 330 N?m |
MT 03/2553 |
On-site Calibration |
|
37 |
10050 - 30001 |
Extensometer |
Gauge length up to 200 mm |
According to ISO 9513 |
On-site Calibration |
|
38 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRA to 88 HRA |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
39 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRB to 100 HRB |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
40 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRC to 65 HRC |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
41 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HR15N to 94 HR15N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
42 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
42 HR30N to 86 HR30N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
43 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
67 HR15T to 93 HR15T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
44 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
29 HR30T to 82 HR30T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
45 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HRE to 100 HRE |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
46 |
10050 - 30202 |
Callibration of Testing Machine Vickers Hardness Testing Machine |
HV0.2, HV0.3, HV0.5, HV5, HV10, HV20, HV30, HV50 |
According to ISO 6507-2 |
Note * not including indenter calibration |
On-site Calibration |
47 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB10/3000, HB10/500, HB10/100 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
48 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB5/750, HB5/125, HB5/62.5 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
49 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB2.5/62.5, HB2.5/31.25, HB2.5/15.625 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
50 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB1/30 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
51 |
10050 - 30103 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale B |
MH01 |
On-site Calibration |
|
52 |
10050 - 30203 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale C |
MH02 |
On-site Calibration |
|
53 |
10050 - 30303 |
Inter-laboratory comparison on hardness measurement- Artifact hardness testing machine |
Rockwell Scale A, B and C |
MH03 |
On-site Calibration |
|
54 |
10050 - 30403 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
HV5, HV10 |
MH04 |
On-site Calibration |
|
55 |
10060 - 30101 |
Absolute Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 10 ?Gal (0.01 ppm) |
This price is for overseas customer; for domestic customer the price to be discussed |
On-site Calibration |
56 |
10060 - 30102 |
Local Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 180 ?Gal (0.18 ppm) |
Using relative method |
On-site Calibration |
57 |
10030 - 30201 |
Universal Testing Machine |
Up to 500 kN |
According to ISO 7500-1 : 2004 |
Calibrated by force-measuring device and ascessories shall be provided by customer |
On-site Calibration |
58 |
10040 - 30303 |
Static Torque Calibration devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
On-site Calibration |
|
59 |
10040 - 30302 |
Static Torque Calibration devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
On-site Calibration |
|
60 |
10040 - 30601 |
Adjustment charge of torque device for on-site calibration |
|
On-site Calibration |
||
61 |
10040 - 30501 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench |
40 N?m to 400 N?m |
MT 01/2550 |
On-site Calibration |
|
62 |
10040 - 30502 |
Inter-laboratoty comparison on torque with cross force'- Artifact: Torque wrench |
8 N?m to 40 N?m |
MT 01.1/2551 |
On-site Calibration |
|
63 |
10040 - 30503 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench calibrator |
10 N?m to 200 N?m |
MT 02/2551 |
On-site Calibration |
|
64 |
10040 - 30504 |
Inter-laboratoty comparison on torque with cross force- Artifact: Setting torque wrench |
20 N?m to 330 N?m |
MT 03/2553 |
On-site Calibration |
|
65 |
10050 - 30001 |
Extensometer |
Gauge length up to 200 mm |
According to ISO 9513 |
On-site Calibration |
|
66 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRA to 88 HRA |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
67 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRB to 100 HRB |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
68 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRC to 65 HRC |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
69 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HR15N to 94 HR15N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
70 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
42 HR30N to 86 HR30N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
71 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
67 HR15T to 93 HR15T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
72 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
29 HR30T to 82 HR30T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
73 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HRE to 100 HRE |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
74 |
10050 - 30202 |
Callibration of Testing Machine Vickers Hardness Testing Machine |
HV0.2, HV0.3, HV0.5, HV5, HV10, HV20, HV30, HV50 |
According to ISO 6507-2 |
Note * not including indenter calibration |
On-site Calibration |
75 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB10/3000, HB10/500, HB10/100 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
76 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB5/750, HB5/125, HB5/62.5 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
77 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB2.5/62.5, HB2.5/31.25, HB2.5/15.625 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
78 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB1/30 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
79 |
10050 - 30103 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale B |
MH01 |
On-site Calibration |
|
80 |
10050 - 30203 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale C |
MH02 |
On-site Calibration |
|
81 |
10050 - 30303 |
Inter-laboratory comparison on hardness measurement- Artifact hardness testing machine |
Rockwell Scale A, B and C |
MH03 |
On-site Calibration |
|
82 |
10050 - 30403 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
HV5, HV10 |
MH04 |
On-site Calibration |
|
83 |
10060 - 30101 |
Absolute Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 10 ?Gal (0.01 ppm) |
This price is for overseas customer; for domestic customer the price to be discussed |
On-site Calibration |
84 |
10060 - 30102 |
Local Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 180 ?Gal (0.18 ppm) |
Using relative method |
On-site Calibration |
85 |
10030 - 30201 |
Universal Testing Machine |
Up to 500 kN |
According to ISO 7500-1 : 2004 |
Calibrated by force-measuring device and ascessories shall be provided by customer |
On-site Calibration |
86 |
10040 - 30303 |
Static Torque Calibration devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
On-site Calibration |
|
87 |
10040 - 30302 |
Static Torque Calibration devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
On-site Calibration |
|
88 |
10040 - 30601 |
Adjustment charge of torque device for on-site calibration |
|
On-site Calibration |
||
89 |
10040 - 30501 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench |
40 N?m to 400 N?m |
MT 01/2550 |
On-site Calibration |
|
90 |
10040 - 30502 |
Inter-laboratoty comparison on torque with cross force'- Artifact: Torque wrench |
8 N?m to 40 N?m |
MT 01.1/2551 |
On-site Calibration |
|
91 |
10040 - 30503 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench calibrator |
10 N?m to 200 N?m |
MT 02/2551 |
On-site Calibration |
|
92 |
10040 - 30504 |
Inter-laboratoty comparison on torque with cross force- Artifact: Setting torque wrench |
20 N?m to 330 N?m |
MT 03/2553 |
On-site Calibration |
|
93 |
10050 - 30001 |
Extensometer |
Gauge length up to 200 mm |
According to ISO 9513 |
On-site Calibration |
|
94 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRA to 88 HRA |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
95 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRB to 100 HRB |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
96 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRC to 65 HRC |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
97 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HR15N to 94 HR15N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
98 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
42 HR30N to 86 HR30N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
99 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
67 HR15T to 93 HR15T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
100 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
29 HR30T to 82 HR30T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
101 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HRE to 100 HRE |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
102 |
10050 - 30202 |
Callibration of Testing Machine Vickers Hardness Testing Machine |
HV0.2, HV0.3, HV0.5, HV5, HV10, HV20, HV30, HV50 |
According to ISO 6507-2 |
Note * not including indenter calibration |
On-site Calibration |
103 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB10/3000, HB10/500, HB10/100 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
104 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB5/750, HB5/125, HB5/62.5 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
105 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB2.5/62.5, HB2.5/31.25, HB2.5/15.625 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
106 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB1/30 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
107 |
10050 - 30103 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale B |
MH01 |
On-site Calibration |
|
108 |
10050 - 30203 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale C |
MH02 |
On-site Calibration |
|
109 |
10050 - 30303 |
Inter-laboratory comparison on hardness measurement- Artifact hardness testing machine |
Rockwell Scale A, B and C |
MH03 |
On-site Calibration |
|
110 |
10050 - 30403 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
HV5, HV10 |
MH04 |
On-site Calibration |
|
111 |
10060 - 30101 |
Absolute Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 10 ?Gal (0.01 ppm) |
This price is for overseas customer; for domestic customer the price to be discussed |
On-site Calibration |
112 |
10060 - 30102 |
Local Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 180 ?Gal (0.18 ppm) |
Using relative method |
On-site Calibration |
113 |
10030 - 30201 |
Universal Testing Machine |
Up to 500 kN |
According to ISO 7500-1 : 2004 |
Calibrated by force-measuring device and ascessories shall be provided by customer |
On-site Calibration |
114 |
10040 - 30303 |
Static Torque Calibration devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
On-site Calibration |
|
115 |
10040 - 30302 |
Static Torque Calibration devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
On-site Calibration |
|
116 |
10040 - 30601 |
Adjustment charge of torque device for on-site calibration |
|
On-site Calibration |
||
117 |
10040 - 30501 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench |
40 N?m to 400 N?m |
MT 01/2550 |
On-site Calibration |
|
118 |
10040 - 30502 |
Inter-laboratoty comparison on torque with cross force'- Artifact: Torque wrench |
8 N?m to 40 N?m |
MT 01.1/2551 |
On-site Calibration |
|
119 |
10040 - 30503 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench calibrator |
10 N?m to 200 N?m |
MT 02/2551 |
On-site Calibration |
|
120 |
10040 - 30504 |
Inter-laboratoty comparison on torque with cross force- Artifact: Setting torque wrench |
20 N?m to 330 N?m |
MT 03/2553 |
On-site Calibration |
|
121 |
10050 - 30001 |
Extensometer |
Gauge length up to 200 mm |
According to ISO 9513 |
On-site Calibration |
|
122 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRA to 88 HRA |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
123 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRB to 100 HRB |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
124 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRC to 65 HRC |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
125 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HR15N to 94 HR15N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
126 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
42 HR30N to 86 HR30N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
127 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
67 HR15T to 93 HR15T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
128 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
29 HR30T to 82 HR30T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
129 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HRE to 100 HRE |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
130 |
10050 - 30202 |
Callibration of Testing Machine Vickers Hardness Testing Machine |
HV0.2, HV0.3, HV0.5, HV5, HV10, HV20, HV30, HV50 |
According to ISO 6507-2 |
Note * not including indenter calibration |
On-site Calibration |
131 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB10/3000, HB10/500, HB10/100 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
132 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB5/750, HB5/125, HB5/62.5 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
133 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB2.5/62.5, HB2.5/31.25, HB2.5/15.625 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
134 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB1/30 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
135 |
10050 - 30103 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale B |
MH01 |
On-site Calibration |
|
136 |
10050 - 30203 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale C |
MH02 |
On-site Calibration |
|
137 |
10050 - 30303 |
Inter-laboratory comparison on hardness measurement- Artifact hardness testing machine |
Rockwell Scale A, B and C |
MH03 |
On-site Calibration |
|
138 |
10050 - 30403 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
HV5, HV10 |
MH04 |
On-site Calibration |
|
139 |
10060 - 30101 |
Absolute Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 10 ?Gal (0.01 ppm) |
This price is for overseas customer; for domestic customer the price to be discussed |
On-site Calibration |
140 |
10060 - 30102 |
Local Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 180 ?Gal (0.18 ppm) |
Using relative method |
On-site Calibration |