บริการสอบเทียบของสถาบันมาตรวิทยาแห่งชาติ
Mechanical Metrology
Item No. |
Code |
Description |
Range |
Accuracy |
Remark |
Service |
---|---|---|---|---|---|---|
1 |
10011 - 10001 |
Mass Standard |
1 kg |
class E0 |
Trace to BIPM (Mass standard 1 kg ;Stainless Steel ) in air |
Calibration Fee |
2 |
10011 - 10101 |
Weight or Weight set |
1 mg to 1 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
3 |
10011 - 10102 |
Weight or Weight set |
2 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
4 |
10011 - 10103 |
Weight or Weight set |
5 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
5 |
10011 - 10104 |
Weight or Weight set |
10 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
6 |
10011 - 10105 |
Weight or Weight set |
20 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
7 |
10011 - 10201 |
Weight or Weight Set |
1 mg to 1 kg |
Class E2 |
Conventional mass |
Calibration Fee |
8 |
10011 - 10202 |
Weight or Weight Set |
2 kg |
Class E2 |
Conventional mass |
Calibration Fee |
9 |
10011 - 10203 |
Weight or Weight Set |
5 kg |
Class E2 |
Conventional mass |
Calibration Fee |
10 |
10011 - 10204 |
Weight or Weight Set |
10 kg |
Class E2 |
Conventional mass |
Calibration Fee |
11 |
10011 - 10205 |
Weight or Weight Set |
20 kg |
Class E2 |
Conventional mass |
Calibration Fee |
12 |
10011 - 10206 |
Weight or Weight Set |
50 kg |
Class E2 |
Conventional mass |
Calibration Fee |
13 |
10011 - 10301 |
Weight or Weight Set |
1 mg to 1 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
14 |
10011 - 10302 |
Weight or Weight Set |
2 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
15 |
10011 - 10303 |
Weight or Weight Set |
5 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
16 |
10011 - 10304 |
Weight or Weight Set |
10 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
17 |
10011 - 10305 |
Weight or Weight Set |
20 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
18 |
10011 - 10306 |
Weight or Weight Set |
50 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
19 |
10011 - 10307 |
Weight or Weight Set |
100 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
20 |
10011 - 10308 |
Weight or Weight Set |
200 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
21 |
10011 - 10401 |
Weight or Weight Set |
500 kg |
Class F2 and lower |
Conventional mass |
Calibration Fee |
22 |
10011 - 10402 |
Weight or Weight Set |
1000 kg |
Class F2 and lower |
Conventional mass |
Calibration Fee |
23 |
10011 - 10501 |
Weight or Weight Set |
2000 kg |
Class M1 and lower |
Conventional mass |
Calibration Fee |
24 |
10012 - 10101 |
Volume magnetic susceptibility of weight |
1 g to 20 kg |
In the range of 10% to 20% |
By the susceptometer method |
Calibration Fee |
25 |
10013 - 10101 |
Surface roughness (Ra,Rz) of weight |
Up to 5 mm |
where Zm (unit nm) being measured value of weight |
Nominal weight range 1 g to 1 kg |
Calibration Fee |
26 |
10021 - 10101 |
Density and volume of weight |
1 g to 1 kg |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
|
27 |
10021 - 10101 |
Density and volume of weight |
1 g |
120 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
28 |
10021 - 10101 |
Density and volume of weight |
2 g |
60 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
29 |
10021 - 10101 |
Density and volume of weight |
5 g |
20 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
30 |
10021 - 10101 |
Density and volume of weight |
10 g |
15 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
31 |
10021 - 10101 |
Density and volume of weight |
20 g |
10 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
32 |
10021 - 10101 |
Density and volume of weight |
50 g |
5.6 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
33 |
10021 - 10101 |
Density and volume of weight |
100 g |
4.4 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
34 |
10021 - 10101 |
Density and volume of weight |
200 g |
3.8 kg/m3, 0.007 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
35 |
10021 - 10101 |
Density and volume of weight |
500 g |
2.7 kg/m3, 0.018 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
36 |
10021 - 10101 |
Density and volume of weight |
1 kg |
2.6 kg/m3, 0.036 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
37 |
10021 - 10101 |
Density and volume of weight |
2 kg |
6.8 kg/m3, 0.21 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
38 |
10021 - 10101 |
Density and volume of weight |
5 kg |
3.3 kg/m3, 0.25 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
39 |
10021 - 10101 |
Density and volume of weight |
10 kg |
2.4 kg/m3, 0.4 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
40 |
10021 - 10101 |
Density and volume of weight |
20 kg |
2 kg/m3, 0.7 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
41 |
10021 - 10102 |
Density and volume of solid artifact |
2700 kg/m3 to 9000 kg/m3 1.25 cm3 to 110 cm3 |
0.6 to 120 kg/m3 0.0020 to 0.25 cm3 |
Traceable to SI units via Silicon Cylinder |
Calibration Fee |
42 |
10021 - 10301 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.100 kg/m3 |
scale division 0.2 kg/m3 |
Calibration Fee |
43 |
10021 - 10302 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.125 kg/m3 |
scale division 0.5 kg/m3 |
Calibration Fee |
44 |
10021 - 10303 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.25 kg/m3 |
scale division more than 0.5 kg/m3 |
Calibration Fee |
45 |
10021 - 10304 |
Specific Gravity Hydrometer |
0.590 sp/gr to 2.025 sp/gr |
0.00010 sp/gr |
Calibration Fee |
|
46 |
10021 - 10305 |
API Hydrometer |
-1 ?API to 101 ?API |
0.030 ?API |
Calibration Fee |
|
47 |
10021 - 10306 |
Brix Hydrometer |
0 ?Brix to 90 ?Brix |
0.30 ?Brix |
Calibration Fee |
|
48 |
10021 - 10307 |
Baum? Hydrometer |
0 B? to 100 B? |
0.030 B? |
Calibration Fee |
|
49 |
10021 - 10308 |
Glass Volume Alcoholometer |
0 %vol to 100 %vol |
0.10 %vol |
Calibration Fee |
|
50 |
10021 - 10401 |
Density of liquid at ambient temperature and pressure |
600 to 1500 kg/m3 |
0.2 to 2.0 kg/m3 |
By hydrostatic weighing method |
Calibration Fee |
51 |
10021 - 10501 |
Density Meter, Benchtop oscillation type |
700 to 1000 kg/m3 |
0.05 kg/m3 |
By direct comparison with reference fluids |
Calibration Fee |
52 |
10030 - 10101 |
Force-proving instrument |
1 kN to 110* kN |
Accroding to ISO 376:2011 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
53 |
10030 - 10102 |
Force-proving instrument |
0.1 kN to 1.5 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
54 |
10030 - 10103 |
Force-proving instrument |
0.2 kN to 5 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
55 |
10030 - 10104 |
Force-proving instrument |
16 kN to 500 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
56 |
10030 - 10105 |
Force-proving instrument |
50 N to 500 N |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
57 |
10030 - 10201 |
Force-proving instrument |
20 kN to 100 kN |
Accroding to ISO 376:2011 |
Calibrated by force-comparator machine. Digital indicator shall be provided by customer. |
Calibration Fee |
58 |
10030 - 10202 |
Force-proving instrument |
> 100 kN to 500 kN |
Class 0.5 to 2 |
Calibration Fee |
|
59 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
0.1 N?m to 1 N?m |
DIN 51309, 0.015% |
Calibration Fee |
|
60 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
1 N?m to 10 N?m |
DIN 51309, 0.01%, 0.03% |
Calibration Fee |
|
61 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
10 N?m to 1,000 N?m |
DIN 51309, 0.01% |
Calibration Fee |
|
62 |
10040 - 10202 |
Static Torque Transfer Wrenches |
1 N?m to 10 N?m |
DAkkS-DKD-R 3-7, 0.04% |
Calibration Fee |
|
63 |
Static Torque Transfer Wrenches |
10 N?m to 2,000 N?m |
DAkkS-DKD-R 3-7, 0.03% |
Calibration Fee |
||
64 |
10040 - 10303 |
Static Torque Calibration Devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
Calibration Fee |
|
65 |
10040 - 10302 |
Static Torque Calibration Devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
Calibration Fee |
|
66 |
10040 - 10401 |
Hand Torque Tools - Wrench,Torsion or Flexion Bar |
1 N?m to 1,000 N?m |
ISO 6789, 1% |
Calibration Fee |
|
67 |
10040 - 10402 |
Hand Torque Tools- Screwdriver, with Scale or Dial or Display |
1 N?m to 10 N?m |
ISO 6789, 1% |
Calibration Fee |
|
68 |
10040 - 10601 |
Adjustment charge of torque device for permanent laboratory calibration |
|
Calibration Fee |
||
69 |
10050 - 10101 |
Recalibration of Reference Block |
20 HRA to 88 HRA |
0.40 HRA |
Reference Block shall be providedby client. |
Calibration Fee |
70 |
10050 - 10101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRB to 100 HRB |
0.40 HRB |
Reference Block shall be providedby client. |
Calibration Fee |
71 |
10050 - 10101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRC to 70 HRC |
0.40 HRC |
Reference Block shall be providedby client. |
Calibration Fee |
72 |
10050 - 10201 |
Vickers : HV |
HV5, HV10, HV20, HV30, HV50 |
Calibration Fee |
||
73 |
10050 - 10501 |
Vickers : HV |
HV0.1 |
Calibration Fee |
||
74 |
10050 - 10401 |
Brinell Scale: HB |
HB10/3000 |
0.6 % of HB |
Calibration Fee |
|
75 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD-N |
According ISO 18898 |
Calibration Fee |
|
76 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD Pocket |
According ISO 18898 |
Calibration Fee |
|
77 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD-M |
According ISO 18898 |
Calibration Fee |
|
78 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type A |
According ISO 18898 |
Calibration Fee |
|
79 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type D |
According ISO 18898 |
Calibration Fee |
|
80 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type AO |
According ISO 18898 |
Calibration Fee |
|
81 |
10060 - 10101 |
Gas Pressure Balances |
Up to 7 MPa |
> 5x10-4 x Pe to 1x10-4 x Pe |
1. Price per 1 piston & |
Calibration Fee |
82 |
10060 - 10102 |
Gas Pressure Balances |
Up to 7 MPa |
< 1x10-4 x Pe |
cylinder assembly |
Calibration Fee |
83 |
10060 - 10103 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
> 5x10-4 x Pe |
2. Calibration of weight |
Calibration Fee |
84 |
10060 - 10104 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
5x10-4 x Pe to 1x10-4 x Pe |
set is included. |
Calibration Fee |
85 |
10060 - 10105 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
< 1x10-4 x Pe |
Calibration Fee |
|
86 |
10060 - 10201 |
Hydraulic Pressure Balances |
Up to 200 MPa |
> 5x10-4 x Pe to 1x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
87 |
10060 - 10202 |
Hydraulic Pressure Balances |
Up to 200 MPa |
< 1x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
88 |
10060 - 10203 |
Hydraulic Pressure Balances |
> 200 MPa to 500 MPa |
> 5x10-4 x Pe to 2x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
89 |
10060 - 10204 |
Hydraulic Pressure Balances |
> 200 MPa to 500 MPa |
< 2x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
90 |
10060 - 10313 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Not smaller than 0.2 mbar |
Calibration Fee |
|
91 |
10060 - 10314 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Not smaller than 1 mbar |
Calibration Fee |
|
92 |
10061 - 10319 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Smaller than 0.2 mbar |
Calibration Fee |
|
93 |
10060 - 10315 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to -15 kPa |
> 1x10-3 x Pe |
Calibration Fee |
|
94 |
10060 - 10316 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to -15 kPa |
< 1x10-3 x Pe |
Calibration Fee |
|
95 |
10060 - 10301 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
> 6 x 10-3 x Pe |
Calibration Fee |
|
96 |
10060 - 10302 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
97 |
10060 - 10303 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
< 1x10-3 x Pe, but not smaller than 0,003 mbar |
Calibration Fee |
|
98 |
10060 - 10304 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
> 6x10-3 x Pe |
Calibration Fee |
|
99 |
10060 - 10305 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
100 |
10060 - 10306 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
< 1x10-3 x Pe, but not smaller than 0,003 mbar |
Calibration Fee |
|
101 |
10060 - 10317 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 15 kPa |
> 1x10-3 x Pe |
Calibration Fee |
|
102 |
10060 - 10318 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 15 kPa |
< 1x10-3 x Pe |
Calibration Fee |
|
103 |
10060 - 10307 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
10 kPa to 7 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
104 |
10060 - 10308 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
1,5 kPa to 7 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
105 |
10060 - 10309 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
1,5 kPa to 7 MPa |
< 1x10-3 x Pe |
Calibration Fee |
|
106 |
10060 - 10310 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
107 |
10060 - 10311 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
108 |
10060 - 10312 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
< 1x10-3 x Pe |
Calibration Fee |
|
109 |
10060 - 10401 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
80 kPa to 115 kPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
110 |
10060 - 10402 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
80 kPa to 115 kPa |
Not smaller than 0.35 mbar |
Calibration Fee |
|
111 |
10060 - 10405 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
0 kPa to 15 kPa |
> 1x10-3 x Pabs |
Calibration Fee |
|
112 |
10060 - 10406 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
0 kPa to 15 kPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
113 |
10060 - 10403 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
2 kPa to 7 MPa |
Not smaller than 0.35 mbar |
Calibration Fee |
|
114 |
10060 - 10404 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
1,5 kPa to 40 MPa |
> 1x10-4 x Pabs |
Calibration Fee |
|
115 |
10060 - 10501 |
Mercury Barometers |
85 kPa to 105 kPa |
Not smaller than 0.35 mbar |
Cistern type |
Calibration Fee |
116 |
10060 - 10502 |
Mercury Barometers |
85 kPa to 105 kPa |
Not smaller than 0.35 mbar |
Fortin type |
Calibration Fee |
117 |
10060 - 10601 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
118 |
10060 - 10602 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
119 |
10060 - 10603 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
< 1 x 10-3 x Pe |
Calibration Fee |
|
120 |
10060 - 10604 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
> 200 MPa to 500 MPa |
> 1 x 10-3 x Pe |
Calibration Fee |
|
121 |
10060 - 10605 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
> 200 MPa to 500 MPa |
< 1 x 10-3 x Pe |
Calibration Fee |
|
122 |
10060 - 10801 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
> 6x10-3 x Pabs |
Calibration Fee |
|
123 |
10060 - 10802 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
6x10-3 x Pabs to 1x10-3 x Pabs |
Calibration Fee |
|
124 |
10060 - 10803 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
< 1 x 10-3 x Pabs |
Calibration Fee |
|
125 |
10060 - 10804 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
> 200 MPa to 500 MPa |
> 1 x 10-3 x Pabs |
Calibration Fee |
|
126 |
10060 - 10805 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
> 200 MPa to 500 MPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
127 |
10060 - 10701 |
Gas Differential Pressure at High Static Line ressure (not higher than 40 MPa), DP |
350 kPa maximum differential pressure |
3.5 x 10-5 x DP, but not less than 2.9 Pa |
Price per 1 range of differential pressure and 1 range of high static line pressure |
Calibration Fee |
128 |
10070 - 10101 |
Vacuum Gauges (absolute pressure : pirani gauge, thermal conductivity gauge) |
105 Pa to 10-1 Pa |
0.3% rdg to 1% rdg |
Calibration 10 points minimum |
Calibration Fee |
129 |
10070 - 10201 |
Vacuum Gauges (absolute pressure : capacitance diaphragm gauge) |
105 Pa to 10-1 Pa |
0.2% rdg to 0.45% rdg |
Calibration 3 decades for the head range (1000, 100,10, 1) torr |
Calibration Fee |
130 |
10070 - 10201 |
Vacuum Gauges (absolute pressure : capacitance diaphragm gauge) |
105 Pa to 10-1 Pa |
0.2% rdg to 0.45% rdg |
Calibration 2 decades for the head range 0.1 torr |
Calibration Fee |
131 |
10070 - 10301 |
Vacuum Gauges (absolute pressure : hot cathode ion gauge, cold cathode ion gauge) |
10-1 Pa to 10-5 Pa |
0.5% rdg to 6% rdg |
Calibration Fee |
|
132 |
10070 - 10401 |
Vacuum Gauge (absolute pressure : spinning rotor gauge) |
10 Pa to 10-3 Pa |
0.6% rdg to 4.5% rdg |
Calibration Fee |
|
133 |
10070 - 10501 |
Additional cost for electrical calibration (which the accuracy is not better than +/-0.01% rdg) |
|
Calibration Fee |
||
134 |
10070 - 10502 |
Adjustment charge of pressure and vacuum devices for permanent laboratory calibration |
|
Calibration Fee |
||
135 |
10080 - 10101 |
Liquid Flowmeter (Turbine Flowmeter) |
0.19 L/min to 150* L/min |
0.2%** |
Calibration Fluid : Water |
Calibration Fee |
136 |
10080 - 10102 |
Liquid Flowmeter (with indicator) |
0.19 L/min to 150* L/min |
2% |
Calibration Fee |
|
137 |
10080 - 10103 |
Coriolis Flowmeter (Volumetric method) |
0.2 L/min to 150 L/min |
0.075% |
Calibration Fee |
|
138 |
10080 - 10202 |
Gas Flowmeter with display in standard flow (molbloc-L) |
100 cm3/min to 24000 cm3/min |
0.25% |
Calibration Gas: Dry Air Reference Conditions @ 0?C, 101.325 kPa |
Calibration Fee |
139 |
10080 - 10204 |
Gas Flowmeter with display in standard flow (molbloc-S) |
1 m3/h to 65 m3/h |
0.23% |
Calibration Gas: Dry Air Reference Conditions @ 0?C, 101.325 kPa |
Calibration Fee |
140 |
10080 - 10205 |
Sonic Nozzle at ambient pressure |
1 m3/h to 100 m3/h |
0.22% |
Calibration Gas: Ambient Air |
Calibration Fee |
141 |
10080 - 10203 |
Gas Flow rate (Gas meter with impluse output) |
1 m3/h to 100 m3/h |
0.20% |
Comparison Method |
Calibration Fee |
142 |
10080 - 10403 |
Gas Flow rate (Gas meter with flow rate output) |
1.2 kg/h to 117 kg/h |
0.20% |
Comparison Method |
Calibration Fee |
143 |
10080 - 10501 |
Liquid Volume (Proving tank: Neck scale type, Weir neck type) |
1 L to 10 L |
0.02% to 0.03% |
Gravimetric Method |
Calibration Fee |
144 |
10080 - 10502 |
<10 L to 20 L |
0.02% to 0.03% |
Gravimetric Method |
Calibration Fee |
|
145 |
10081 - 10101 |
Gas Flowmeter(Volume gas flow rate) |
2 (cm3/min) to 24000 (cm3/min) |
0.23% |
Calibration Fluid : Nitrogen Reference Conditions @ 0 degree C, 101.325 kPa |
Calibration Fee |
146 |
10081 - 10102 |
Gas Flowmeter(Volume gas flow rate) |
2 (cm3/min) to 1 (m3/min) |
0.23% |
Calibration Fluid : Dry Air Reference Conditions @ 0 degree C, 101.325 kPa |
Calibration Fee |
147 |
10081 - 10201 |
Gas Flowmeter(Mass gas flow rate) |
0.043 (mg/s) to 500 (mg/s) |
0.23% |
Calibration Fluid : Nitrogen |
Calibration Fee |
148 |
10081 - 10202 |
Gas Flowmeter(Mass gas flow rate) |
0.043 (mg/s) to 21545 (mg/s) |
0.23% |
Calibration Fluid : Dry Air |
Calibration Fee |
149 |
10040 - 20501 |
Standard Torque Transducer |
? 2,000 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
150 |
10040 - 20502 |
Standard Torque Transducer |
? 1,000 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
151 |
10040 - 20502 |
Standard Torque Transducer |
? 500 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
152 |
10040 - 20502 |
Standard Torque Transducer |
? 200 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
153 |
10040 - 20502 |
Standard Torque Transducer |
? 50 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
154 |
10040 - 20503 |
Standard Torque Transducer |
? 20 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
155 |
10040 - 20601 |
Standard Torque Transfer Wrench |
? 2,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
156 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 1,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
157 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 500 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
158 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 200 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
159 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 50 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
160 |
10040 - 20603 |
Standard Torque Transfer Wrench |
? 20 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
161 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 2,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
162 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 1,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
163 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 500 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
164 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 200 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
165 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 50 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
166 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 20 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
167 |
10050 - 20301 |
V-notch Charpy Impact CRM |
30 J ? 10 J |
According to ISO148-3 |
Reference Materials For Sale |
|
168 |
10050 - 20302 |
V-notch Charpy Impact CRM |
100 J ? 10 J |
According to ISO148-3 |
Reference Materials For Sale |
|
169 |
10050 - 20101 |
Certified Reference Block |
20 HRA to 88 HRA |
0.40 HRA |
Reference Materials For Sale |
|
170 |
10050 - 20101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRB to 100 HRB |
0.40 HRB |
Reference Materials For Sale |
|
171 |
10050 - 20101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRC to 65 HRC |
0.40 HRC |
Reference Materials For Sale |
|
172 |
10050 - 20201 |
Vickers : HV |
HV5, HV10, HV20, HV30, HV50 |
Reference Materials For Sale |
||
173 |
10050 - 20501 |
Vickers : HV |
HV0.1 |
Reference Materials For Sale |
||
174 |
10050 - 20401 |
Brinell Scale: HB |
HB10/3000 |
0.6 % of HB |
Reference Materials For Sale |
|
175 |
10030 - 30201 |
Universal Testing Machine |
Up to 500 kN |
According to ISO 7500-1 : 2004 |
Calibrated by force-measuring device and ascessories shall be provided by customer |
On-site Calibration |
176 |
10040 - 30303 |
Static Torque Calibration devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
On-site Calibration |
|
177 |
10040 - 30302 |
Static Torque Calibration devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
On-site Calibration |
|
178 |
10040 - 30601 |
Adjustment charge of torque device for on-site calibration |
|
On-site Calibration |
||
179 |
10040 - 30501 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench |
40 N?m to 400 N?m |
MT 01/2550 |
On-site Calibration |
|
180 |
10040 - 30502 |
Inter-laboratoty comparison on torque with cross force'- Artifact: Torque wrench |
8 N?m to 40 N?m |
MT 01.1/2551 |
On-site Calibration |
|
181 |
10040 - 30503 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench calibrator |
10 N?m to 200 N?m |
MT 02/2551 |
On-site Calibration |
|
182 |
10040 - 30504 |
Inter-laboratoty comparison on torque with cross force- Artifact: Setting torque wrench |
20 N?m to 330 N?m |
MT 03/2553 |
On-site Calibration |
|
183 |
10050 - 30001 |
Extensometer |
Gauge length up to 200 mm |
According to ISO 9513 |
On-site Calibration |
|
184 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRA to 88 HRA |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
185 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRB to 100 HRB |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
186 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRC to 65 HRC |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
187 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HR15N to 94 HR15N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
188 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
42 HR30N to 86 HR30N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
189 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
67 HR15T to 93 HR15T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
190 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
29 HR30T to 82 HR30T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
191 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HRE to 100 HRE |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
192 |
10050 - 30202 |
Callibration of Testing Machine Vickers Hardness Testing Machine |
HV0.2, HV0.3, HV0.5, HV5, HV10, HV20, HV30, HV50 |
According to ISO 6507-2 |
Note * not including indenter calibration |
On-site Calibration |
193 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB10/3000, HB10/500, HB10/100 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
194 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB5/750, HB5/125, HB5/62.5 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
195 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB2.5/62.5, HB2.5/31.25, HB2.5/15.625 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
196 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB1/30 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
197 |
10050 - 30103 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale B |
MH01 |
On-site Calibration |
|
198 |
10050 - 30203 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale C |
MH02 |
On-site Calibration |
|
199 |
10050 - 30303 |
Inter-laboratory comparison on hardness measurement- Artifact hardness testing machine |
Rockwell Scale A, B and C |
MH03 |
On-site Calibration |
|
200 |
10050 - 30403 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
HV5, HV10 |
MH04 |
On-site Calibration |
|
201 |
10060 - 30101 |
Absolute Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 10 ?Gal (0.01 ppm) |
This price is for overseas customer; for domestic customer the price to be discussed |
On-site Calibration |
202 |
10060 - 30102 |
Local Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 180 ?Gal (0.18 ppm) |
Using relative method |
On-site Calibration |
203 |
10011 - 10001 |
Mass Standard |
1 kg |
class E0 |
Trace to BIPM (Mass standard 1 kg ;Stainless Steel ) in air |
Calibration Fee |
204 |
10011 - 10101 |
Weight or Weight set |
1 mg to 1 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
205 |
10011 - 10102 |
Weight or Weight set |
2 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
206 |
10011 - 10103 |
Weight or Weight set |
5 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
207 |
10011 - 10104 |
Weight or Weight set |
10 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
208 |
10011 - 10105 |
Weight or Weight set |
20 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
209 |
10011 - 10201 |
Weight or Weight Set |
1 mg to 1 kg |
Class E2 |
Conventional mass |
Calibration Fee |
210 |
10011 - 10202 |
Weight or Weight Set |
2 kg |
Class E2 |
Conventional mass |
Calibration Fee |
211 |
10011 - 10203 |
Weight or Weight Set |
5 kg |
Class E2 |
Conventional mass |
Calibration Fee |
212 |
10011 - 10204 |
Weight or Weight Set |
10 kg |
Class E2 |
Conventional mass |
Calibration Fee |
213 |
10011 - 10205 |
Weight or Weight Set |
20 kg |
Class E2 |
Conventional mass |
Calibration Fee |
214 |
10011 - 10206 |
Weight or Weight Set |
50 kg |
Class E2 |
Conventional mass |
Calibration Fee |
215 |
10011 - 10301 |
Weight or Weight Set |
1 mg to 1 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
216 |
10011 - 10302 |
Weight or Weight Set |
2 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
217 |
10011 - 10303 |
Weight or Weight Set |
5 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
218 |
10011 - 10304 |
Weight or Weight Set |
10 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
219 |
10011 - 10305 |
Weight or Weight Set |
20 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
220 |
10011 - 10306 |
Weight or Weight Set |
50 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
221 |
10011 - 10307 |
Weight or Weight Set |
100 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
222 |
10011 - 10308 |
Weight or Weight Set |
200 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
223 |
10011 - 10401 |
Weight or Weight Set |
500 kg |
Class F2 and lower |
Conventional mass |
Calibration Fee |
224 |
10011 - 10402 |
Weight or Weight Set |
1000 kg |
Class F2 and lower |
Conventional mass |
Calibration Fee |
225 |
10011 - 10501 |
Weight or Weight Set |
2000 kg |
Class M1 and lower |
Conventional mass |
Calibration Fee |
226 |
10012 - 10101 |
Volume magnetic susceptibility of weight |
1 g to 20 kg |
In the range of 10% to 20% |
By the susceptometer method |
Calibration Fee |
227 |
10013 - 10101 |
Surface roughness (Ra,Rz) of weight |
Up to 5 mm |
where Zm (unit nm) being measured value of weight |
Nominal weight range 1 g to 1 kg |
Calibration Fee |
228 |
10021 - 10101 |
Density and volume of weight |
1 g to 1 kg |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
|
229 |
10021 - 10101 |
Density and volume of weight |
1 g |
120 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
230 |
10021 - 10101 |
Density and volume of weight |
2 g |
60 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
231 |
10021 - 10101 |
Density and volume of weight |
5 g |
20 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
232 |
10021 - 10101 |
Density and volume of weight |
10 g |
15 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
233 |
10021 - 10101 |
Density and volume of weight |
20 g |
10 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
234 |
10021 - 10101 |
Density and volume of weight |
50 g |
5.6 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
235 |
10021 - 10101 |
Density and volume of weight |
100 g |
4.4 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
236 |
10021 - 10101 |
Density and volume of weight |
200 g |
3.8 kg/m3, 0.007 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
237 |
10021 - 10101 |
Density and volume of weight |
500 g |
2.7 kg/m3, 0.018 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
238 |
10021 - 10101 |
Density and volume of weight |
1 kg |
2.6 kg/m3, 0.036 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
239 |
10021 - 10101 |
Density and volume of weight |
2 kg |
6.8 kg/m3, 0.21 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
240 |
10021 - 10101 |
Density and volume of weight |
5 kg |
3.3 kg/m3, 0.25 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
241 |
10021 - 10101 |
Density and volume of weight |
10 kg |
2.4 kg/m3, 0.4 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
242 |
10021 - 10101 |
Density and volume of weight |
20 kg |
2 kg/m3, 0.7 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
243 |
10021 - 10102 |
Density and volume of solid artifact |
2700 kg/m3 to 9000 kg/m3 1.25 cm3 to 110 cm3 |
0.6 to 120 kg/m3 0.0020 to 0.25 cm3 |
Traceable to SI units via Silicon Cylinder |
Calibration Fee |
244 |
10021 - 10301 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.100 kg/m3 |
scale division 0.2 kg/m3 |
Calibration Fee |
245 |
10021 - 10302 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.125 kg/m3 |
scale division 0.5 kg/m3 |
Calibration Fee |
246 |
10021 - 10303 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.25 kg/m3 |
scale division more than 0.5 kg/m3 |
Calibration Fee |
247 |
10021 - 10304 |
Specific Gravity Hydrometer |
0.590 sp/gr to 2.025 sp/gr |
0.00010 sp/gr |
Calibration Fee |
|
248 |
10021 - 10305 |
API Hydrometer |
-1 ?API to 101 ?API |
0.030 ?API |
Calibration Fee |
|
249 |
10021 - 10306 |
Brix Hydrometer |
0 ?Brix to 90 ?Brix |
0.30 ?Brix |
Calibration Fee |
|
250 |
10021 - 10307 |
Baum? Hydrometer |
0 B? to 100 B? |
0.030 B? |
Calibration Fee |
|
251 |
10021 - 10308 |
Glass Volume Alcoholometer |
0 %vol to 100 %vol |
0.10 %vol |
Calibration Fee |
|
252 |
10021 - 10401 |
Density of liquid at ambient temperature and pressure |
600 to 1500 kg/m3 |
0.2 to 2.0 kg/m3 |
By hydrostatic weighing method |
Calibration Fee |
253 |
10021 - 10501 |
Density Meter, Benchtop oscillation type |
700 to 1000 kg/m3 |
0.05 kg/m3 |
By direct comparison with reference fluids |
Calibration Fee |
254 |
10030 - 10101 |
Force-proving instrument |
1 kN to 110* kN |
Accroding to ISO 376:2011 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
255 |
10030 - 10102 |
Force-proving instrument |
0.1 kN to 1.5 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
256 |
10030 - 10103 |
Force-proving instrument |
0.2 kN to 5 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
257 |
10030 - 10104 |
Force-proving instrument |
16 kN to 500 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
258 |
10030 - 10105 |
Force-proving instrument |
50 N to 500 N |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
259 |
10030 - 10201 |
Force-proving instrument |
20 kN to 100 kN |
Accroding to ISO 376:2011 |
Calibrated by force-comparator machine. Digital indicator shall be provided by customer. |
Calibration Fee |
260 |
10030 - 10202 |
Force-proving instrument |
> 100 kN to 500 kN |
Class 0.5 to 2 |
Calibration Fee |
|
261 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
0.1 N?m to 1 N?m |
DIN 51309, 0.015% |
Calibration Fee |
|
262 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
1 N?m to 10 N?m |
DIN 51309, 0.01%, 0.03% |
Calibration Fee |
|
263 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
10 N?m to 1,000 N?m |
DIN 51309, 0.01% |
Calibration Fee |
|
264 |
10040 - 10202 |
Static Torque Transfer Wrenches |
1 N?m to 10 N?m |
DAkkS-DKD-R 3-7, 0.04% |
Calibration Fee |
|
265 |
Static Torque Transfer Wrenches |
10 N?m to 2,000 N?m |
DAkkS-DKD-R 3-7, 0.03% |
Calibration Fee |
||
266 |
10040 - 10303 |
Static Torque Calibration Devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
Calibration Fee |
|
267 |
10040 - 10302 |
Static Torque Calibration Devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
Calibration Fee |
|
268 |
10040 - 10401 |
Hand Torque Tools - Wrench,Torsion or Flexion Bar |
1 N?m to 1,000 N?m |
ISO 6789, 1% |
Calibration Fee |
|
269 |
10040 - 10402 |
Hand Torque Tools- Screwdriver, with Scale or Dial or Display |
1 N?m to 10 N?m |
ISO 6789, 1% |
Calibration Fee |
|
270 |
10040 - 10601 |
Adjustment charge of torque device for permanent laboratory calibration |
|
Calibration Fee |
||
271 |
10050 - 10101 |
Recalibration of Reference Block |
20 HRA to 88 HRA |
0.40 HRA |
Reference Block shall be providedby client. |
Calibration Fee |
272 |
10050 - 10101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRB to 100 HRB |
0.40 HRB |
Reference Block shall be providedby client. |
Calibration Fee |
273 |
10050 - 10101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRC to 70 HRC |
0.40 HRC |
Reference Block shall be providedby client. |
Calibration Fee |
274 |
10050 - 10201 |
Vickers : HV |
HV5, HV10, HV20, HV30, HV50 |
Calibration Fee |
||
275 |
10050 - 10501 |
Vickers : HV |
HV0.1 |
Calibration Fee |
||
276 |
10050 - 10401 |
Brinell Scale: HB |
HB10/3000 |
0.6 % of HB |
Calibration Fee |
|
277 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD-N |
According ISO 18898 |
Calibration Fee |
|
278 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD Pocket |
According ISO 18898 |
Calibration Fee |
|
279 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD-M |
According ISO 18898 |
Calibration Fee |
|
280 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type A |
According ISO 18898 |
Calibration Fee |
|
281 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type D |
According ISO 18898 |
Calibration Fee |
|
282 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type AO |
According ISO 18898 |
Calibration Fee |
|
283 |
10060 - 10101 |
Gas Pressure Balances |
Up to 7 MPa |
> 5x10-4 x Pe to 1x10-4 x Pe |
1. Price per 1 piston & |
Calibration Fee |
284 |
10060 - 10102 |
Gas Pressure Balances |
Up to 7 MPa |
< 1x10-4 x Pe |
cylinder assembly |
Calibration Fee |
285 |
10060 - 10103 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
> 5x10-4 x Pe |
2. Calibration of weight |
Calibration Fee |
286 |
10060 - 10104 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
5x10-4 x Pe to 1x10-4 x Pe |
set is included. |
Calibration Fee |
287 |
10060 - 10105 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
< 1x10-4 x Pe |
Calibration Fee |
|
288 |
10060 - 10201 |
Hydraulic Pressure Balances |
Up to 200 MPa |
> 5x10-4 x Pe to 1x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
289 |
10060 - 10202 |
Hydraulic Pressure Balances |
Up to 200 MPa |
< 1x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
290 |
10060 - 10203 |
Hydraulic Pressure Balances |
> 200 MPa to 500 MPa |
> 5x10-4 x Pe to 2x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
291 |
10060 - 10204 |
Hydraulic Pressure Balances |
> 200 MPa to 500 MPa |
< 2x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
292 |
10060 - 10313 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Not smaller than 0.2 mbar |
Calibration Fee |
|
293 |
10060 - 10314 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Not smaller than 1 mbar |
Calibration Fee |
|
294 |
10061 - 10319 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Smaller than 0.2 mbar |
Calibration Fee |
|
295 |
10060 - 10315 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to -15 kPa |
> 1x10-3 x Pe |
Calibration Fee |
|
296 |
10060 - 10316 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to -15 kPa |
< 1x10-3 x Pe |
Calibration Fee |
|
297 |
10060 - 10301 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
> 6 x 10-3 x Pe |
Calibration Fee |
|
298 |
10060 - 10302 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
299 |
10060 - 10303 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
< 1x10-3 x Pe, but not smaller than 0,003 mbar |
Calibration Fee |
|
300 |
10060 - 10304 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
> 6x10-3 x Pe |
Calibration Fee |
|
301 |
10060 - 10305 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
302 |
10060 - 10306 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
< 1x10-3 x Pe, but not smaller than 0,003 mbar |
Calibration Fee |
|
303 |
10060 - 10317 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 15 kPa |
> 1x10-3 x Pe |
Calibration Fee |
|
304 |
10060 - 10318 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 15 kPa |
< 1x10-3 x Pe |
Calibration Fee |
|
305 |
10060 - 10307 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
10 kPa to 7 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
306 |
10060 - 10308 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
1,5 kPa to 7 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
307 |
10060 - 10309 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
1,5 kPa to 7 MPa |
< 1x10-3 x Pe |
Calibration Fee |
|
308 |
10060 - 10310 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
309 |
10060 - 10311 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
310 |
10060 - 10312 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
< 1x10-3 x Pe |
Calibration Fee |
|
311 |
10060 - 10401 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
80 kPa to 115 kPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
312 |
10060 - 10402 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
80 kPa to 115 kPa |
Not smaller than 0.35 mbar |
Calibration Fee |
|
313 |
10060 - 10405 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
0 kPa to 15 kPa |
> 1x10-3 x Pabs |
Calibration Fee |
|
314 |
10060 - 10406 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
0 kPa to 15 kPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
315 |
10060 - 10403 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
2 kPa to 7 MPa |
Not smaller than 0.35 mbar |
Calibration Fee |
|
316 |
10060 - 10404 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
1,5 kPa to 40 MPa |
> 1x10-4 x Pabs |
Calibration Fee |
|
317 |
10060 - 10501 |
Mercury Barometers |
85 kPa to 105 kPa |
Not smaller than 0.35 mbar |
Cistern type |
Calibration Fee |
318 |
10060 - 10502 |
Mercury Barometers |
85 kPa to 105 kPa |
Not smaller than 0.35 mbar |
Fortin type |
Calibration Fee |
319 |
10060 - 10601 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
320 |
10060 - 10602 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
321 |
10060 - 10603 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
< 1 x 10-3 x Pe |
Calibration Fee |
|
322 |
10060 - 10604 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
> 200 MPa to 500 MPa |
> 1 x 10-3 x Pe |
Calibration Fee |
|
323 |
10060 - 10605 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
> 200 MPa to 500 MPa |
< 1 x 10-3 x Pe |
Calibration Fee |
|
324 |
10060 - 10801 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
> 6x10-3 x Pabs |
Calibration Fee |
|
325 |
10060 - 10802 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
6x10-3 x Pabs to 1x10-3 x Pabs |
Calibration Fee |
|
326 |
10060 - 10803 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
< 1 x 10-3 x Pabs |
Calibration Fee |
|
327 |
10060 - 10804 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
> 200 MPa to 500 MPa |
> 1 x 10-3 x Pabs |
Calibration Fee |
|
328 |
10060 - 10805 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
> 200 MPa to 500 MPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
329 |
10060 - 10701 |
Gas Differential Pressure at High Static Line ressure (not higher than 40 MPa), DP |
350 kPa maximum differential pressure |
3.5 x 10-5 x DP, but not less than 2.9 Pa |
Price per 1 range of differential pressure and 1 range of high static line pressure |
Calibration Fee |
330 |
10070 - 10101 |
Vacuum Gauges (absolute pressure : pirani gauge, thermal conductivity gauge) |
105 Pa to 10-1 Pa |
0.3% rdg to 1% rdg |
Calibration 10 points minimum |
Calibration Fee |
331 |
10070 - 10201 |
Vacuum Gauges (absolute pressure : capacitance diaphragm gauge) |
105 Pa to 10-1 Pa |
0.2% rdg to 0.45% rdg |
Calibration 3 decades for the head range (1000, 100,10, 1) torr |
Calibration Fee |
332 |
10070 - 10201 |
Vacuum Gauges (absolute pressure : capacitance diaphragm gauge) |
105 Pa to 10-1 Pa |
0.2% rdg to 0.45% rdg |
Calibration 2 decades for the head range 0.1 torr |
Calibration Fee |
333 |
10070 - 10301 |
Vacuum Gauges (absolute pressure : hot cathode ion gauge, cold cathode ion gauge) |
10-1 Pa to 10-5 Pa |
0.5% rdg to 6% rdg |
Calibration Fee |
|
334 |
10070 - 10401 |
Vacuum Gauge (absolute pressure : spinning rotor gauge) |
10 Pa to 10-3 Pa |
0.6% rdg to 4.5% rdg |
Calibration Fee |
|
335 |
10070 - 10501 |
Additional cost for electrical calibration (which the accuracy is not better than +/-0.01% rdg) |
|
Calibration Fee |
||
336 |
10070 - 10502 |
Adjustment charge of pressure and vacuum devices for permanent laboratory calibration |
|
Calibration Fee |
||
337 |
10080 - 10101 |
Liquid Flowmeter (Turbine Flowmeter) |
0.19 L/min to 150* L/min |
0.2%** |
Calibration Fluid : Water |
Calibration Fee |
338 |
10080 - 10102 |
Liquid Flowmeter (with indicator) |
0.19 L/min to 150* L/min |
2% |
Calibration Fee |
|
339 |
10080 - 10103 |
Coriolis Flowmeter (Volumetric method) |
0.2 L/min to 150 L/min |
0.075% |
Calibration Fee |
|
340 |
10080 - 10202 |
Gas Flowmeter with display in standard flow (molbloc-L) |
100 cm3/min to 24000 cm3/min |
0.25% |
Calibration Gas: Dry Air Reference Conditions @ 0?C, 101.325 kPa |
Calibration Fee |
341 |
10080 - 10204 |
Gas Flowmeter with display in standard flow (molbloc-S) |
1 m3/h to 65 m3/h |
0.23% |
Calibration Gas: Dry Air Reference Conditions @ 0?C, 101.325 kPa |
Calibration Fee |
342 |
10080 - 10205 |
Sonic Nozzle at ambient pressure |
1 m3/h to 100 m3/h |
0.22% |
Calibration Gas: Ambient Air |
Calibration Fee |
343 |
10080 - 10203 |
Gas Flow rate (Gas meter with impluse output) |
1 m3/h to 100 m3/h |
0.20% |
Comparison Method |
Calibration Fee |
344 |
10080 - 10403 |
Gas Flow rate (Gas meter with flow rate output) |
1.2 kg/h to 117 kg/h |
0.20% |
Comparison Method |
Calibration Fee |
345 |
10080 - 10501 |
Liquid Volume (Proving tank: Neck scale type, Weir neck type) |
1 L to 10 L |
0.02% to 0.03% |
Gravimetric Method |
Calibration Fee |
346 |
10080 - 10502 |
<10 L to 20 L |
0.02% to 0.03% |
Gravimetric Method |
Calibration Fee |
|
347 |
10081 - 10101 |
Gas Flowmeter(Volume gas flow rate) |
2 (cm3/min) to 24000 (cm3/min) |
0.23% |
Calibration Fluid : Nitrogen Reference Conditions @ 0 degree C, 101.325 kPa |
Calibration Fee |
348 |
10081 - 10102 |
Gas Flowmeter(Volume gas flow rate) |
2 (cm3/min) to 1 (m3/min) |
0.23% |
Calibration Fluid : Dry Air Reference Conditions @ 0 degree C, 101.325 kPa |
Calibration Fee |
349 |
10081 - 10201 |
Gas Flowmeter(Mass gas flow rate) |
0.043 (mg/s) to 500 (mg/s) |
0.23% |
Calibration Fluid : Nitrogen |
Calibration Fee |
350 |
10081 - 10202 |
Gas Flowmeter(Mass gas flow rate) |
0.043 (mg/s) to 21545 (mg/s) |
0.23% |
Calibration Fluid : Dry Air |
Calibration Fee |
351 |
10040 - 20501 |
Standard Torque Transducer |
? 2,000 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
352 |
10040 - 20502 |
Standard Torque Transducer |
? 1,000 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
353 |
10040 - 20502 |
Standard Torque Transducer |
? 500 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
354 |
10040 - 20502 |
Standard Torque Transducer |
? 200 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
355 |
10040 - 20502 |
Standard Torque Transducer |
? 50 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
356 |
10040 - 20503 |
Standard Torque Transducer |
? 20 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
357 |
10040 - 20601 |
Standard Torque Transfer Wrench |
? 2,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
358 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 1,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
359 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 500 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
360 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 200 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
361 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 50 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
362 |
10040 - 20603 |
Standard Torque Transfer Wrench |
? 20 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
363 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 2,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
364 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 1,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
365 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 500 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
366 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 200 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
367 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 50 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
368 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 20 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
369 |
10050 - 20301 |
V-notch Charpy Impact CRM |
30 J ? 10 J |
According to ISO148-3 |
Reference Materials For Sale |
|
370 |
10050 - 20302 |
V-notch Charpy Impact CRM |
100 J ? 10 J |
According to ISO148-3 |
Reference Materials For Sale |
|
371 |
10050 - 20101 |
Certified Reference Block |
20 HRA to 88 HRA |
0.40 HRA |
Reference Materials For Sale |
|
372 |
10050 - 20101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRB to 100 HRB |
0.40 HRB |
Reference Materials For Sale |
|
373 |
10050 - 20101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRC to 65 HRC |
0.40 HRC |
Reference Materials For Sale |
|
374 |
10050 - 20201 |
Vickers : HV |
HV5, HV10, HV20, HV30, HV50 |
Reference Materials For Sale |
||
375 |
10050 - 20501 |
Vickers : HV |
HV0.1 |
Reference Materials For Sale |
||
376 |
10050 - 20401 |
Brinell Scale: HB |
HB10/3000 |
0.6 % of HB |
Reference Materials For Sale |
|
377 |
10030 - 30201 |
Universal Testing Machine |
Up to 500 kN |
According to ISO 7500-1 : 2004 |
Calibrated by force-measuring device and ascessories shall be provided by customer |
On-site Calibration |
378 |
10040 - 30303 |
Static Torque Calibration devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
On-site Calibration |
|
379 |
10040 - 30302 |
Static Torque Calibration devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
On-site Calibration |
|
380 |
10040 - 30601 |
Adjustment charge of torque device for on-site calibration |
|
On-site Calibration |
||
381 |
10040 - 30501 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench |
40 N?m to 400 N?m |
MT 01/2550 |
On-site Calibration |
|
382 |
10040 - 30502 |
Inter-laboratoty comparison on torque with cross force'- Artifact: Torque wrench |
8 N?m to 40 N?m |
MT 01.1/2551 |
On-site Calibration |
|
383 |
10040 - 30503 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench calibrator |
10 N?m to 200 N?m |
MT 02/2551 |
On-site Calibration |
|
384 |
10040 - 30504 |
Inter-laboratoty comparison on torque with cross force- Artifact: Setting torque wrench |
20 N?m to 330 N?m |
MT 03/2553 |
On-site Calibration |
|
385 |
10050 - 30001 |
Extensometer |
Gauge length up to 200 mm |
According to ISO 9513 |
On-site Calibration |
|
386 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRA to 88 HRA |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
387 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRB to 100 HRB |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
388 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRC to 65 HRC |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
389 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HR15N to 94 HR15N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
390 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
42 HR30N to 86 HR30N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
391 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
67 HR15T to 93 HR15T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
392 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
29 HR30T to 82 HR30T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
393 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HRE to 100 HRE |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
394 |
10050 - 30202 |
Callibration of Testing Machine Vickers Hardness Testing Machine |
HV0.2, HV0.3, HV0.5, HV5, HV10, HV20, HV30, HV50 |
According to ISO 6507-2 |
Note * not including indenter calibration |
On-site Calibration |
395 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB10/3000, HB10/500, HB10/100 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
396 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB5/750, HB5/125, HB5/62.5 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
397 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB2.5/62.5, HB2.5/31.25, HB2.5/15.625 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
398 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB1/30 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
399 |
10050 - 30103 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale B |
MH01 |
On-site Calibration |
|
400 |
10050 - 30203 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale C |
MH02 |
On-site Calibration |
|
401 |
10050 - 30303 |
Inter-laboratory comparison on hardness measurement- Artifact hardness testing machine |
Rockwell Scale A, B and C |
MH03 |
On-site Calibration |
|
402 |
10050 - 30403 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
HV5, HV10 |
MH04 |
On-site Calibration |
|
403 |
10060 - 30101 |
Absolute Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 10 ?Gal (0.01 ppm) |
This price is for overseas customer; for domestic customer the price to be discussed |
On-site Calibration |
404 |
10060 - 30102 |
Local Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 180 ?Gal (0.18 ppm) |
Using relative method |
On-site Calibration |
405 |
10011 - 10001 |
Mass Standard |
1 kg |
class E0 |
Trace to BIPM (Mass standard 1 kg ;Stainless Steel ) in air |
Calibration Fee |
406 |
10011 - 10101 |
Weight or Weight set |
1 mg to 1 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
407 |
10011 - 10102 |
Weight or Weight set |
2 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
408 |
10011 - 10103 |
Weight or Weight set |
5 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
409 |
10011 - 10104 |
Weight or Weight set |
10 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
410 |
10011 - 10105 |
Weight or Weight set |
20 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
411 |
10011 - 10201 |
Weight or Weight Set |
1 mg to 1 kg |
Class E2 |
Conventional mass |
Calibration Fee |
412 |
10011 - 10202 |
Weight or Weight Set |
2 kg |
Class E2 |
Conventional mass |
Calibration Fee |
413 |
10011 - 10203 |
Weight or Weight Set |
5 kg |
Class E2 |
Conventional mass |
Calibration Fee |
414 |
10011 - 10204 |
Weight or Weight Set |
10 kg |
Class E2 |
Conventional mass |
Calibration Fee |
415 |
10011 - 10205 |
Weight or Weight Set |
20 kg |
Class E2 |
Conventional mass |
Calibration Fee |
416 |
10011 - 10206 |
Weight or Weight Set |
50 kg |
Class E2 |
Conventional mass |
Calibration Fee |
417 |
10011 - 10301 |
Weight or Weight Set |
1 mg to 1 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
418 |
10011 - 10302 |
Weight or Weight Set |
2 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
419 |
10011 - 10303 |
Weight or Weight Set |
5 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
420 |
10011 - 10304 |
Weight or Weight Set |
10 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
421 |
10011 - 10305 |
Weight or Weight Set |
20 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
422 |
10011 - 10306 |
Weight or Weight Set |
50 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
423 |
10011 - 10307 |
Weight or Weight Set |
100 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
424 |
10011 - 10308 |
Weight or Weight Set |
200 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
425 |
10011 - 10401 |
Weight or Weight Set |
500 kg |
Class F2 and lower |
Conventional mass |
Calibration Fee |
426 |
10011 - 10402 |
Weight or Weight Set |
1000 kg |
Class F2 and lower |
Conventional mass |
Calibration Fee |
427 |
10011 - 10501 |
Weight or Weight Set |
2000 kg |
Class M1 and lower |
Conventional mass |
Calibration Fee |
428 |
10012 - 10101 |
Volume magnetic susceptibility of weight |
1 g to 20 kg |
In the range of 10% to 20% |
By the susceptometer method |
Calibration Fee |
429 |
10013 - 10101 |
Surface roughness (Ra,Rz) of weight |
Up to 5 mm |
where Zm (unit nm) being measured value of weight |
Nominal weight range 1 g to 1 kg |
Calibration Fee |
430 |
10021 - 10101 |
Density and volume of weight |
1 g to 1 kg |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
|
431 |
10021 - 10101 |
Density and volume of weight |
1 g |
120 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
432 |
10021 - 10101 |
Density and volume of weight |
2 g |
60 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
433 |
10021 - 10101 |
Density and volume of weight |
5 g |
20 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
434 |
10021 - 10101 |
Density and volume of weight |
10 g |
15 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
435 |
10021 - 10101 |
Density and volume of weight |
20 g |
10 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
436 |
10021 - 10101 |
Density and volume of weight |
50 g |
5.6 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
437 |
10021 - 10101 |
Density and volume of weight |
100 g |
4.4 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
438 |
10021 - 10101 |
Density and volume of weight |
200 g |
3.8 kg/m3, 0.007 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
439 |
10021 - 10101 |
Density and volume of weight |
500 g |
2.7 kg/m3, 0.018 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
440 |
10021 - 10101 |
Density and volume of weight |
1 kg |
2.6 kg/m3, 0.036 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
441 |
10021 - 10101 |
Density and volume of weight |
2 kg |
6.8 kg/m3, 0.21 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
442 |
10021 - 10101 |
Density and volume of weight |
5 kg |
3.3 kg/m3, 0.25 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
443 |
10021 - 10101 |
Density and volume of weight |
10 kg |
2.4 kg/m3, 0.4 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
444 |
10021 - 10101 |
Density and volume of weight |
20 kg |
2 kg/m3, 0.7 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
445 |
10021 - 10102 |
Density and volume of solid artifact |
2700 kg/m3 to 9000 kg/m3 1.25 cm3 to 110 cm3 |
0.6 to 120 kg/m3 0.0020 to 0.25 cm3 |
Traceable to SI units via Silicon Cylinder |
Calibration Fee |
446 |
10021 - 10301 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.100 kg/m3 |
scale division 0.2 kg/m3 |
Calibration Fee |
447 |
10021 - 10302 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.125 kg/m3 |
scale division 0.5 kg/m3 |
Calibration Fee |
448 |
10021 - 10303 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.25 kg/m3 |
scale division more than 0.5 kg/m3 |
Calibration Fee |
449 |
10021 - 10304 |
Specific Gravity Hydrometer |
0.590 sp/gr to 2.025 sp/gr |
0.00010 sp/gr |
Calibration Fee |
|
450 |
10021 - 10305 |
API Hydrometer |
-1 ?API to 101 ?API |
0.030 ?API |
Calibration Fee |
|
451 |
10021 - 10306 |
Brix Hydrometer |
0 ?Brix to 90 ?Brix |
0.30 ?Brix |
Calibration Fee |
|
452 |
10021 - 10307 |
Baum? Hydrometer |
0 B? to 100 B? |
0.030 B? |
Calibration Fee |
|
453 |
10021 - 10308 |
Glass Volume Alcoholometer |
0 %vol to 100 %vol |
0.10 %vol |
Calibration Fee |
|
454 |
10021 - 10401 |
Density of liquid at ambient temperature and pressure |
600 to 1500 kg/m3 |
0.2 to 2.0 kg/m3 |
By hydrostatic weighing method |
Calibration Fee |
455 |
10021 - 10501 |
Density Meter, Benchtop oscillation type |
700 to 1000 kg/m3 |
0.05 kg/m3 |
By direct comparison with reference fluids |
Calibration Fee |
456 |
10030 - 10101 |
Force-proving instrument |
1 kN to 110* kN |
Accroding to ISO 376:2011 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
457 |
10030 - 10102 |
Force-proving instrument |
0.1 kN to 1.5 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
458 |
10030 - 10103 |
Force-proving instrument |
0.2 kN to 5 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
459 |
10030 - 10104 |
Force-proving instrument |
16 kN to 500 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
460 |
10030 - 10105 |
Force-proving instrument |
50 N to 500 N |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
461 |
10030 - 10201 |
Force-proving instrument |
20 kN to 100 kN |
Accroding to ISO 376:2011 |
Calibrated by force-comparator machine. Digital indicator shall be provided by customer. |
Calibration Fee |
462 |
10030 - 10202 |
Force-proving instrument |
> 100 kN to 500 kN |
Class 0.5 to 2 |
Calibration Fee |
|
463 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
0.1 N?m to 1 N?m |
DIN 51309, 0.015% |
Calibration Fee |
|
464 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
1 N?m to 10 N?m |
DIN 51309, 0.01%, 0.03% |
Calibration Fee |
|
465 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
10 N?m to 1,000 N?m |
DIN 51309, 0.01% |
Calibration Fee |
|
466 |
10040 - 10202 |
Static Torque Transfer Wrenches |
1 N?m to 10 N?m |
DAkkS-DKD-R 3-7, 0.04% |
Calibration Fee |
|
467 |
Static Torque Transfer Wrenches |
10 N?m to 2,000 N?m |
DAkkS-DKD-R 3-7, 0.03% |
Calibration Fee |
||
468 |
10040 - 10303 |
Static Torque Calibration Devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
Calibration Fee |
|
469 |
10040 - 10302 |
Static Torque Calibration Devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
Calibration Fee |
|
470 |
10040 - 10401 |
Hand Torque Tools - Wrench,Torsion or Flexion Bar |
1 N?m to 1,000 N?m |
ISO 6789, 1% |
Calibration Fee |
|
471 |
10040 - 10402 |
Hand Torque Tools- Screwdriver, with Scale or Dial or Display |
1 N?m to 10 N?m |
ISO 6789, 1% |
Calibration Fee |
|
472 |
10040 - 10601 |
Adjustment charge of torque device for permanent laboratory calibration |
|
Calibration Fee |
||
473 |
10050 - 10101 |
Recalibration of Reference Block |
20 HRA to 88 HRA |
0.40 HRA |
Reference Block shall be providedby client. |
Calibration Fee |
474 |
10050 - 10101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRB to 100 HRB |
0.40 HRB |
Reference Block shall be providedby client. |
Calibration Fee |
475 |
10050 - 10101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRC to 70 HRC |
0.40 HRC |
Reference Block shall be providedby client. |
Calibration Fee |
476 |
10050 - 10201 |
Vickers : HV |
HV5, HV10, HV20, HV30, HV50 |
Calibration Fee |
||
477 |
10050 - 10501 |
Vickers : HV |
HV0.1 |
Calibration Fee |
||
478 |
10050 - 10401 |
Brinell Scale: HB |
HB10/3000 |
0.6 % of HB |
Calibration Fee |
|
479 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD-N |
According ISO 18898 |
Calibration Fee |
|
480 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD Pocket |
According ISO 18898 |
Calibration Fee |
|
481 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD-M |
According ISO 18898 |
Calibration Fee |
|
482 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type A |
According ISO 18898 |
Calibration Fee |
|
483 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type D |
According ISO 18898 |
Calibration Fee |
|
484 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type AO |
According ISO 18898 |
Calibration Fee |
|
485 |
10060 - 10101 |
Gas Pressure Balances |
Up to 7 MPa |
> 5x10-4 x Pe to 1x10-4 x Pe |
1. Price per 1 piston & |
Calibration Fee |
486 |
10060 - 10102 |
Gas Pressure Balances |
Up to 7 MPa |
< 1x10-4 x Pe |
cylinder assembly |
Calibration Fee |
487 |
10060 - 10103 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
> 5x10-4 x Pe |
2. Calibration of weight |
Calibration Fee |
488 |
10060 - 10104 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
5x10-4 x Pe to 1x10-4 x Pe |
set is included. |
Calibration Fee |
489 |
10060 - 10105 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
< 1x10-4 x Pe |
Calibration Fee |
|
490 |
10060 - 10201 |
Hydraulic Pressure Balances |
Up to 200 MPa |
> 5x10-4 x Pe to 1x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
491 |
10060 - 10202 |
Hydraulic Pressure Balances |
Up to 200 MPa |
< 1x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
492 |
10060 - 10203 |
Hydraulic Pressure Balances |
> 200 MPa to 500 MPa |
> 5x10-4 x Pe to 2x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
493 |
10060 - 10204 |
Hydraulic Pressure Balances |
> 200 MPa to 500 MPa |
< 2x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
494 |
10060 - 10313 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Not smaller than 0.2 mbar |
Calibration Fee |
|
495 |
10060 - 10314 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Not smaller than 1 mbar |
Calibration Fee |
|
496 |
10061 - 10319 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Smaller than 0.2 mbar |
Calibration Fee |
|
497 |
10060 - 10315 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to -15 kPa |
> 1x10-3 x Pe |
Calibration Fee |
|
498 |
10060 - 10316 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to -15 kPa |
< 1x10-3 x Pe |
Calibration Fee |
|
499 |
10060 - 10301 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
> 6 x 10-3 x Pe |
Calibration Fee |
|
500 |
10060 - 10302 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
501 |
10060 - 10303 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
< 1x10-3 x Pe, but not smaller than 0,003 mbar |
Calibration Fee |
|
502 |
10060 - 10304 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
> 6x10-3 x Pe |
Calibration Fee |
|
503 |
10060 - 10305 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
504 |
10060 - 10306 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
< 1x10-3 x Pe, but not smaller than 0,003 mbar |
Calibration Fee |
|
505 |
10060 - 10317 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 15 kPa |
> 1x10-3 x Pe |
Calibration Fee |
|
506 |
10060 - 10318 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 15 kPa |
< 1x10-3 x Pe |
Calibration Fee |
|
507 |
10060 - 10307 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
10 kPa to 7 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
508 |
10060 - 10308 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
1,5 kPa to 7 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
509 |
10060 - 10309 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
1,5 kPa to 7 MPa |
< 1x10-3 x Pe |
Calibration Fee |
|
510 |
10060 - 10310 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
511 |
10060 - 10311 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
512 |
10060 - 10312 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
< 1x10-3 x Pe |
Calibration Fee |
|
513 |
10060 - 10401 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
80 kPa to 115 kPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
514 |
10060 - 10402 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
80 kPa to 115 kPa |
Not smaller than 0.35 mbar |
Calibration Fee |
|
515 |
10060 - 10405 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
0 kPa to 15 kPa |
> 1x10-3 x Pabs |
Calibration Fee |
|
516 |
10060 - 10406 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
0 kPa to 15 kPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
517 |
10060 - 10403 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
2 kPa to 7 MPa |
Not smaller than 0.35 mbar |
Calibration Fee |
|
518 |
10060 - 10404 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
1,5 kPa to 40 MPa |
> 1x10-4 x Pabs |
Calibration Fee |
|
519 |
10060 - 10501 |
Mercury Barometers |
85 kPa to 105 kPa |
Not smaller than 0.35 mbar |
Cistern type |
Calibration Fee |
520 |
10060 - 10502 |
Mercury Barometers |
85 kPa to 105 kPa |
Not smaller than 0.35 mbar |
Fortin type |
Calibration Fee |
521 |
10060 - 10601 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
522 |
10060 - 10602 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
523 |
10060 - 10603 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
< 1 x 10-3 x Pe |
Calibration Fee |
|
524 |
10060 - 10604 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
> 200 MPa to 500 MPa |
> 1 x 10-3 x Pe |
Calibration Fee |
|
525 |
10060 - 10605 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
> 200 MPa to 500 MPa |
< 1 x 10-3 x Pe |
Calibration Fee |
|
526 |
10060 - 10801 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
> 6x10-3 x Pabs |
Calibration Fee |
|
527 |
10060 - 10802 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
6x10-3 x Pabs to 1x10-3 x Pabs |
Calibration Fee |
|
528 |
10060 - 10803 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
< 1 x 10-3 x Pabs |
Calibration Fee |
|
529 |
10060 - 10804 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
> 200 MPa to 500 MPa |
> 1 x 10-3 x Pabs |
Calibration Fee |
|
530 |
10060 - 10805 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
> 200 MPa to 500 MPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
531 |
10060 - 10701 |
Gas Differential Pressure at High Static Line ressure (not higher than 40 MPa), DP |
350 kPa maximum differential pressure |
3.5 x 10-5 x DP, but not less than 2.9 Pa |
Price per 1 range of differential pressure and 1 range of high static line pressure |
Calibration Fee |
532 |
10070 - 10101 |
Vacuum Gauges (absolute pressure : pirani gauge, thermal conductivity gauge) |
105 Pa to 10-1 Pa |
0.3% rdg to 1% rdg |
Calibration 10 points minimum |
Calibration Fee |
533 |
10070 - 10201 |
Vacuum Gauges (absolute pressure : capacitance diaphragm gauge) |
105 Pa to 10-1 Pa |
0.2% rdg to 0.45% rdg |
Calibration 3 decades for the head range (1000, 100,10, 1) torr |
Calibration Fee |
534 |
10070 - 10201 |
Vacuum Gauges (absolute pressure : capacitance diaphragm gauge) |
105 Pa to 10-1 Pa |
0.2% rdg to 0.45% rdg |
Calibration 2 decades for the head range 0.1 torr |
Calibration Fee |
535 |
10070 - 10301 |
Vacuum Gauges (absolute pressure : hot cathode ion gauge, cold cathode ion gauge) |
10-1 Pa to 10-5 Pa |
0.5% rdg to 6% rdg |
Calibration Fee |
|
536 |
10070 - 10401 |
Vacuum Gauge (absolute pressure : spinning rotor gauge) |
10 Pa to 10-3 Pa |
0.6% rdg to 4.5% rdg |
Calibration Fee |
|
537 |
10070 - 10501 |
Additional cost for electrical calibration (which the accuracy is not better than +/-0.01% rdg) |
|
Calibration Fee |
||
538 |
10070 - 10502 |
Adjustment charge of pressure and vacuum devices for permanent laboratory calibration |
|
Calibration Fee |
||
539 |
10080 - 10101 |
Liquid Flowmeter (Turbine Flowmeter) |
0.19 L/min to 150* L/min |
0.2%** |
Calibration Fluid : Water |
Calibration Fee |
540 |
10080 - 10102 |
Liquid Flowmeter (with indicator) |
0.19 L/min to 150* L/min |
2% |
Calibration Fee |
|
541 |
10080 - 10103 |
Coriolis Flowmeter (Volumetric method) |
0.2 L/min to 150 L/min |
0.075% |
Calibration Fee |
|
542 |
10080 - 10202 |
Gas Flowmeter with display in standard flow (molbloc-L) |
100 cm3/min to 24000 cm3/min |
0.25% |
Calibration Gas: Dry Air Reference Conditions @ 0?C, 101.325 kPa |
Calibration Fee |
543 |
10080 - 10204 |
Gas Flowmeter with display in standard flow (molbloc-S) |
1 m3/h to 65 m3/h |
0.23% |
Calibration Gas: Dry Air Reference Conditions @ 0?C, 101.325 kPa |
Calibration Fee |
544 |
10080 - 10205 |
Sonic Nozzle at ambient pressure |
1 m3/h to 100 m3/h |
0.22% |
Calibration Gas: Ambient Air |
Calibration Fee |
545 |
10080 - 10203 |
Gas Flow rate (Gas meter with impluse output) |
1 m3/h to 100 m3/h |
0.20% |
Comparison Method |
Calibration Fee |
546 |
10080 - 10403 |
Gas Flow rate (Gas meter with flow rate output) |
1.2 kg/h to 117 kg/h |
0.20% |
Comparison Method |
Calibration Fee |
547 |
10080 - 10501 |
Liquid Volume (Proving tank: Neck scale type, Weir neck type) |
1 L to 10 L |
0.02% to 0.03% |
Gravimetric Method |
Calibration Fee |
548 |
10080 - 10502 |
<10 L to 20 L |
0.02% to 0.03% |
Gravimetric Method |
Calibration Fee |
|
549 |
10081 - 10101 |
Gas Flowmeter(Volume gas flow rate) |
2 (cm3/min) to 24000 (cm3/min) |
0.23% |
Calibration Fluid : Nitrogen Reference Conditions @ 0 degree C, 101.325 kPa |
Calibration Fee |
550 |
10081 - 10102 |
Gas Flowmeter(Volume gas flow rate) |
2 (cm3/min) to 1 (m3/min) |
0.23% |
Calibration Fluid : Dry Air Reference Conditions @ 0 degree C, 101.325 kPa |
Calibration Fee |
551 |
10081 - 10201 |
Gas Flowmeter(Mass gas flow rate) |
0.043 (mg/s) to 500 (mg/s) |
0.23% |
Calibration Fluid : Nitrogen |
Calibration Fee |
552 |
10081 - 10202 |
Gas Flowmeter(Mass gas flow rate) |
0.043 (mg/s) to 21545 (mg/s) |
0.23% |
Calibration Fluid : Dry Air |
Calibration Fee |
553 |
10040 - 20501 |
Standard Torque Transducer |
? 2,000 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
554 |
10040 - 20502 |
Standard Torque Transducer |
? 1,000 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
555 |
10040 - 20502 |
Standard Torque Transducer |
? 500 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
556 |
10040 - 20502 |
Standard Torque Transducer |
? 200 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
557 |
10040 - 20502 |
Standard Torque Transducer |
? 50 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
558 |
10040 - 20503 |
Standard Torque Transducer |
? 20 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
559 |
10040 - 20601 |
Standard Torque Transfer Wrench |
? 2,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
560 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 1,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
561 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 500 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
562 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 200 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
563 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 50 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
564 |
10040 - 20603 |
Standard Torque Transfer Wrench |
? 20 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
565 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 2,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
566 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 1,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
567 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 500 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
568 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 200 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
569 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 50 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
570 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 20 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
571 |
10050 - 20301 |
V-notch Charpy Impact CRM |
30 J ? 10 J |
According to ISO148-3 |
Reference Materials For Sale |
|
572 |
10050 - 20302 |
V-notch Charpy Impact CRM |
100 J ? 10 J |
According to ISO148-3 |
Reference Materials For Sale |
|
573 |
10050 - 20101 |
Certified Reference Block |
20 HRA to 88 HRA |
0.40 HRA |
Reference Materials For Sale |
|
574 |
10050 - 20101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRB to 100 HRB |
0.40 HRB |
Reference Materials For Sale |
|
575 |
10050 - 20101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRC to 65 HRC |
0.40 HRC |
Reference Materials For Sale |
|
576 |
10050 - 20201 |
Vickers : HV |
HV5, HV10, HV20, HV30, HV50 |
Reference Materials For Sale |
||
577 |
10050 - 20501 |
Vickers : HV |
HV0.1 |
Reference Materials For Sale |
||
578 |
10050 - 20401 |
Brinell Scale: HB |
HB10/3000 |
0.6 % of HB |
Reference Materials For Sale |
|
579 |
10030 - 30201 |
Universal Testing Machine |
Up to 500 kN |
According to ISO 7500-1 : 2004 |
Calibrated by force-measuring device and ascessories shall be provided by customer |
On-site Calibration |
580 |
10040 - 30303 |
Static Torque Calibration devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
On-site Calibration |
|
581 |
10040 - 30302 |
Static Torque Calibration devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
On-site Calibration |
|
582 |
10040 - 30601 |
Adjustment charge of torque device for on-site calibration |
|
On-site Calibration |
||
583 |
10040 - 30501 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench |
40 N?m to 400 N?m |
MT 01/2550 |
On-site Calibration |
|
584 |
10040 - 30502 |
Inter-laboratoty comparison on torque with cross force'- Artifact: Torque wrench |
8 N?m to 40 N?m |
MT 01.1/2551 |
On-site Calibration |
|
585 |
10040 - 30503 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench calibrator |
10 N?m to 200 N?m |
MT 02/2551 |
On-site Calibration |
|
586 |
10040 - 30504 |
Inter-laboratoty comparison on torque with cross force- Artifact: Setting torque wrench |
20 N?m to 330 N?m |
MT 03/2553 |
On-site Calibration |
|
587 |
10050 - 30001 |
Extensometer |
Gauge length up to 200 mm |
According to ISO 9513 |
On-site Calibration |
|
588 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRA to 88 HRA |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
589 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRB to 100 HRB |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
590 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRC to 65 HRC |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
591 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HR15N to 94 HR15N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
592 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
42 HR30N to 86 HR30N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
593 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
67 HR15T to 93 HR15T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
594 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
29 HR30T to 82 HR30T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
595 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HRE to 100 HRE |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
596 |
10050 - 30202 |
Callibration of Testing Machine Vickers Hardness Testing Machine |
HV0.2, HV0.3, HV0.5, HV5, HV10, HV20, HV30, HV50 |
According to ISO 6507-2 |
Note * not including indenter calibration |
On-site Calibration |
597 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB10/3000, HB10/500, HB10/100 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
598 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB5/750, HB5/125, HB5/62.5 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
599 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB2.5/62.5, HB2.5/31.25, HB2.5/15.625 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
600 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB1/30 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
601 |
10050 - 30103 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale B |
MH01 |
On-site Calibration |
|
602 |
10050 - 30203 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale C |
MH02 |
On-site Calibration |
|
603 |
10050 - 30303 |
Inter-laboratory comparison on hardness measurement- Artifact hardness testing machine |
Rockwell Scale A, B and C |
MH03 |
On-site Calibration |
|
604 |
10050 - 30403 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
HV5, HV10 |
MH04 |
On-site Calibration |
|
605 |
10060 - 30101 |
Absolute Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 10 ?Gal (0.01 ppm) |
This price is for overseas customer; for domestic customer the price to be discussed |
On-site Calibration |
606 |
10060 - 30102 |
Local Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 180 ?Gal (0.18 ppm) |
Using relative method |
On-site Calibration |
607 |
10011 - 10001 |
Mass Standard |
1 kg |
class E0 |
Trace to BIPM (Mass standard 1 kg ;Stainless Steel ) in air |
Calibration Fee |
608 |
10011 - 10101 |
Weight or Weight set |
1 mg to 1 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
609 |
10011 - 10102 |
Weight or Weight set |
2 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
610 |
10011 - 10103 |
Weight or Weight set |
5 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
611 |
10011 - 10104 |
Weight or Weight set |
10 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
612 |
10011 - 10105 |
Weight or Weight set |
20 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
613 |
10011 - 10201 |
Weight or Weight Set |
1 mg to 1 kg |
Class E2 |
Conventional mass |
Calibration Fee |
614 |
10011 - 10202 |
Weight or Weight Set |
2 kg |
Class E2 |
Conventional mass |
Calibration Fee |
615 |
10011 - 10203 |
Weight or Weight Set |
5 kg |
Class E2 |
Conventional mass |
Calibration Fee |
616 |
10011 - 10204 |
Weight or Weight Set |
10 kg |
Class E2 |
Conventional mass |
Calibration Fee |
617 |
10011 - 10205 |
Weight or Weight Set |
20 kg |
Class E2 |
Conventional mass |
Calibration Fee |
618 |
10011 - 10206 |
Weight or Weight Set |
50 kg |
Class E2 |
Conventional mass |
Calibration Fee |
619 |
10011 - 10301 |
Weight or Weight Set |
1 mg to 1 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
620 |
10011 - 10302 |
Weight or Weight Set |
2 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
621 |
10011 - 10303 |
Weight or Weight Set |
5 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
622 |
10011 - 10304 |
Weight or Weight Set |
10 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
623 |
10011 - 10305 |
Weight or Weight Set |
20 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
624 |
10011 - 10306 |
Weight or Weight Set |
50 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
625 |
10011 - 10307 |
Weight or Weight Set |
100 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
626 |
10011 - 10308 |
Weight or Weight Set |
200 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
627 |
10011 - 10401 |
Weight or Weight Set |
500 kg |
Class F2 and lower |
Conventional mass |
Calibration Fee |
628 |
10011 - 10402 |
Weight or Weight Set |
1000 kg |
Class F2 and lower |
Conventional mass |
Calibration Fee |
629 |
10011 - 10501 |
Weight or Weight Set |
2000 kg |
Class M1 and lower |
Conventional mass |
Calibration Fee |
630 |
10012 - 10101 |
Volume magnetic susceptibility of weight |
1 g to 20 kg |
In the range of 10% to 20% |
By the susceptometer method |
Calibration Fee |
631 |
10013 - 10101 |
Surface roughness (Ra,Rz) of weight |
Up to 5 mm |
where Zm (unit nm) being measured value of weight |
Nominal weight range 1 g to 1 kg |
Calibration Fee |
632 |
10021 - 10101 |
Density and volume of weight |
1 g to 1 kg |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
|
633 |
10021 - 10101 |
Density and volume of weight |
1 g |
120 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
634 |
10021 - 10101 |
Density and volume of weight |
2 g |
60 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
635 |
10021 - 10101 |
Density and volume of weight |
5 g |
20 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
636 |
10021 - 10101 |
Density and volume of weight |
10 g |
15 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
637 |
10021 - 10101 |
Density and volume of weight |
20 g |
10 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
638 |
10021 - 10101 |
Density and volume of weight |
50 g |
5.6 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
639 |
10021 - 10101 |
Density and volume of weight |
100 g |
4.4 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
640 |
10021 - 10101 |
Density and volume of weight |
200 g |
3.8 kg/m3, 0.007 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
641 |
10021 - 10101 |
Density and volume of weight |
500 g |
2.7 kg/m3, 0.018 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
642 |
10021 - 10101 |
Density and volume of weight |
1 kg |
2.6 kg/m3, 0.036 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
643 |
10021 - 10101 |
Density and volume of weight |
2 kg |
6.8 kg/m3, 0.21 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
644 |
10021 - 10101 |
Density and volume of weight |
5 kg |
3.3 kg/m3, 0.25 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
645 |
10021 - 10101 |
Density and volume of weight |
10 kg |
2.4 kg/m3, 0.4 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
646 |
10021 - 10101 |
Density and volume of weight |
20 kg |
2 kg/m3, 0.7 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
647 |
10021 - 10102 |
Density and volume of solid artifact |
2700 kg/m3 to 9000 kg/m3 1.25 cm3 to 110 cm3 |
0.6 to 120 kg/m3 0.0020 to 0.25 cm3 |
Traceable to SI units via Silicon Cylinder |
Calibration Fee |
648 |
10021 - 10301 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.100 kg/m3 |
scale division 0.2 kg/m3 |
Calibration Fee |
649 |
10021 - 10302 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.125 kg/m3 |
scale division 0.5 kg/m3 |
Calibration Fee |
650 |
10021 - 10303 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.25 kg/m3 |
scale division more than 0.5 kg/m3 |
Calibration Fee |
651 |
10021 - 10304 |
Specific Gravity Hydrometer |
0.590 sp/gr to 2.025 sp/gr |
0.00010 sp/gr |
Calibration Fee |
|
652 |
10021 - 10305 |
API Hydrometer |
-1 ?API to 101 ?API |
0.030 ?API |
Calibration Fee |
|
653 |
10021 - 10306 |
Brix Hydrometer |
0 ?Brix to 90 ?Brix |
0.30 ?Brix |
Calibration Fee |
|
654 |
10021 - 10307 |
Baum? Hydrometer |
0 B? to 100 B? |
0.030 B? |
Calibration Fee |
|
655 |
10021 - 10308 |
Glass Volume Alcoholometer |
0 %vol to 100 %vol |
0.10 %vol |
Calibration Fee |
|
656 |
10021 - 10401 |
Density of liquid at ambient temperature and pressure |
600 to 1500 kg/m3 |
0.2 to 2.0 kg/m3 |
By hydrostatic weighing method |
Calibration Fee |
657 |
10021 - 10501 |
Density Meter, Benchtop oscillation type |
700 to 1000 kg/m3 |
0.05 kg/m3 |
By direct comparison with reference fluids |
Calibration Fee |
658 |
10030 - 10101 |
Force-proving instrument |
1 kN to 110* kN |
Accroding to ISO 376:2011 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
659 |
10030 - 10102 |
Force-proving instrument |
0.1 kN to 1.5 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
660 |
10030 - 10103 |
Force-proving instrument |
0.2 kN to 5 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
661 |
10030 - 10104 |
Force-proving instrument |
16 kN to 500 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
662 |
10030 - 10105 |
Force-proving instrument |
50 N to 500 N |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
663 |
10030 - 10201 |
Force-proving instrument |
20 kN to 100 kN |
Accroding to ISO 376:2011 |
Calibrated by force-comparator machine. Digital indicator shall be provided by customer. |
Calibration Fee |
664 |
10030 - 10202 |
Force-proving instrument |
> 100 kN to 500 kN |
Class 0.5 to 2 |
Calibration Fee |
|
665 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
0.1 N?m to 1 N?m |
DIN 51309, 0.015% |
Calibration Fee |
|
666 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
1 N?m to 10 N?m |
DIN 51309, 0.01%, 0.03% |
Calibration Fee |
|
667 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
10 N?m to 1,000 N?m |
DIN 51309, 0.01% |
Calibration Fee |
|
668 |
10040 - 10202 |
Static Torque Transfer Wrenches |
1 N?m to 10 N?m |
DAkkS-DKD-R 3-7, 0.04% |
Calibration Fee |
|
669 |
Static Torque Transfer Wrenches |
10 N?m to 2,000 N?m |
DAkkS-DKD-R 3-7, 0.03% |
Calibration Fee |
||
670 |
10040 - 10303 |
Static Torque Calibration Devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
Calibration Fee |
|
671 |
10040 - 10302 |
Static Torque Calibration Devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
Calibration Fee |
|
672 |
10040 - 10401 |
Hand Torque Tools - Wrench,Torsion or Flexion Bar |
1 N?m to 1,000 N?m |
ISO 6789, 1% |
Calibration Fee |
|
673 |
10040 - 10402 |
Hand Torque Tools- Screwdriver, with Scale or Dial or Display |
1 N?m to 10 N?m |
ISO 6789, 1% |
Calibration Fee |
|
674 |
10040 - 10601 |
Adjustment charge of torque device for permanent laboratory calibration |
|
Calibration Fee |
||
675 |
10050 - 10101 |
Recalibration of Reference Block |
20 HRA to 88 HRA |
0.40 HRA |
Reference Block shall be providedby client. |
Calibration Fee |
676 |
10050 - 10101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRB to 100 HRB |
0.40 HRB |
Reference Block shall be providedby client. |
Calibration Fee |
677 |
10050 - 10101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRC to 70 HRC |
0.40 HRC |
Reference Block shall be providedby client. |
Calibration Fee |
678 |
10050 - 10201 |
Vickers : HV |
HV5, HV10, HV20, HV30, HV50 |
Calibration Fee |
||
679 |
10050 - 10501 |
Vickers : HV |
HV0.1 |
Calibration Fee |
||
680 |
10050 - 10401 |
Brinell Scale: HB |
HB10/3000 |
0.6 % of HB |
Calibration Fee |
|
681 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD-N |
According ISO 18898 |
Calibration Fee |
|
682 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD Pocket |
According ISO 18898 |
Calibration Fee |
|
683 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD-M |
According ISO 18898 |
Calibration Fee |
|
684 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type A |
According ISO 18898 |
Calibration Fee |
|
685 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type D |
According ISO 18898 |
Calibration Fee |
|
686 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type AO |
According ISO 18898 |
Calibration Fee |
|
687 |
10060 - 10101 |
Gas Pressure Balances |
Up to 7 MPa |
> 5x10-4 x Pe to 1x10-4 x Pe |
1. Price per 1 piston & |
Calibration Fee |
688 |
10060 - 10102 |
Gas Pressure Balances |
Up to 7 MPa |
< 1x10-4 x Pe |
cylinder assembly |
Calibration Fee |
689 |
10060 - 10103 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
> 5x10-4 x Pe |
2. Calibration of weight |
Calibration Fee |
690 |
10060 - 10104 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
5x10-4 x Pe to 1x10-4 x Pe |
set is included. |
Calibration Fee |
691 |
10060 - 10105 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
< 1x10-4 x Pe |
Calibration Fee |
|
692 |
10060 - 10201 |
Hydraulic Pressure Balances |
Up to 200 MPa |
> 5x10-4 x Pe to 1x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
693 |
10060 - 10202 |
Hydraulic Pressure Balances |
Up to 200 MPa |
< 1x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
694 |
10060 - 10203 |
Hydraulic Pressure Balances |
> 200 MPa to 500 MPa |
> 5x10-4 x Pe to 2x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
695 |
10060 - 10204 |
Hydraulic Pressure Balances |
> 200 MPa to 500 MPa |
< 2x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
696 |
10060 - 10313 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Not smaller than 0.2 mbar |
Calibration Fee |
|
697 |
10060 - 10314 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Not smaller than 1 mbar |
Calibration Fee |
|
698 |
10061 - 10319 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Smaller than 0.2 mbar |
Calibration Fee |
|
699 |
10060 - 10315 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to -15 kPa |
> 1x10-3 x Pe |
Calibration Fee |
|
700 |
10060 - 10316 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to -15 kPa |
< 1x10-3 x Pe |
Calibration Fee |
|
701 |
10060 - 10301 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
> 6 x 10-3 x Pe |
Calibration Fee |
|
702 |
10060 - 10302 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
703 |
10060 - 10303 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
< 1x10-3 x Pe, but not smaller than 0,003 mbar |
Calibration Fee |
|
704 |
10060 - 10304 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
> 6x10-3 x Pe |
Calibration Fee |
|
705 |
10060 - 10305 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
706 |
10060 - 10306 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
< 1x10-3 x Pe, but not smaller than 0,003 mbar |
Calibration Fee |
|
707 |
10060 - 10317 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 15 kPa |
> 1x10-3 x Pe |
Calibration Fee |
|
708 |
10060 - 10318 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 15 kPa |
< 1x10-3 x Pe |
Calibration Fee |
|
709 |
10060 - 10307 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
10 kPa to 7 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
710 |
10060 - 10308 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
1,5 kPa to 7 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
711 |
10060 - 10309 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
1,5 kPa to 7 MPa |
< 1x10-3 x Pe |
Calibration Fee |
|
712 |
10060 - 10310 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
713 |
10060 - 10311 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
714 |
10060 - 10312 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
< 1x10-3 x Pe |
Calibration Fee |
|
715 |
10060 - 10401 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
80 kPa to 115 kPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
716 |
10060 - 10402 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
80 kPa to 115 kPa |
Not smaller than 0.35 mbar |
Calibration Fee |
|
717 |
10060 - 10405 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
0 kPa to 15 kPa |
> 1x10-3 x Pabs |
Calibration Fee |
|
718 |
10060 - 10406 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
0 kPa to 15 kPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
719 |
10060 - 10403 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
2 kPa to 7 MPa |
Not smaller than 0.35 mbar |
Calibration Fee |
|
720 |
10060 - 10404 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
1,5 kPa to 40 MPa |
> 1x10-4 x Pabs |
Calibration Fee |
|
721 |
10060 - 10501 |
Mercury Barometers |
85 kPa to 105 kPa |
Not smaller than 0.35 mbar |
Cistern type |
Calibration Fee |
722 |
10060 - 10502 |
Mercury Barometers |
85 kPa to 105 kPa |
Not smaller than 0.35 mbar |
Fortin type |
Calibration Fee |
723 |
10060 - 10601 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
724 |
10060 - 10602 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
725 |
10060 - 10603 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
< 1 x 10-3 x Pe |
Calibration Fee |
|
726 |
10060 - 10604 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
> 200 MPa to 500 MPa |
> 1 x 10-3 x Pe |
Calibration Fee |
|
727 |
10060 - 10605 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
> 200 MPa to 500 MPa |
< 1 x 10-3 x Pe |
Calibration Fee |
|
728 |
10060 - 10801 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
> 6x10-3 x Pabs |
Calibration Fee |
|
729 |
10060 - 10802 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
6x10-3 x Pabs to 1x10-3 x Pabs |
Calibration Fee |
|
730 |
10060 - 10803 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
< 1 x 10-3 x Pabs |
Calibration Fee |
|
731 |
10060 - 10804 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
> 200 MPa to 500 MPa |
> 1 x 10-3 x Pabs |
Calibration Fee |
|
732 |
10060 - 10805 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
> 200 MPa to 500 MPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
733 |
10060 - 10701 |
Gas Differential Pressure at High Static Line ressure (not higher than 40 MPa), DP |
350 kPa maximum differential pressure |
3.5 x 10-5 x DP, but not less than 2.9 Pa |
Price per 1 range of differential pressure and 1 range of high static line pressure |
Calibration Fee |
734 |
10070 - 10101 |
Vacuum Gauges (absolute pressure : pirani gauge, thermal conductivity gauge) |
105 Pa to 10-1 Pa |
0.3% rdg to 1% rdg |
Calibration 10 points minimum |
Calibration Fee |
735 |
10070 - 10201 |
Vacuum Gauges (absolute pressure : capacitance diaphragm gauge) |
105 Pa to 10-1 Pa |
0.2% rdg to 0.45% rdg |
Calibration 3 decades for the head range (1000, 100,10, 1) torr |
Calibration Fee |
736 |
10070 - 10201 |
Vacuum Gauges (absolute pressure : capacitance diaphragm gauge) |
105 Pa to 10-1 Pa |
0.2% rdg to 0.45% rdg |
Calibration 2 decades for the head range 0.1 torr |
Calibration Fee |
737 |
10070 - 10301 |
Vacuum Gauges (absolute pressure : hot cathode ion gauge, cold cathode ion gauge) |
10-1 Pa to 10-5 Pa |
0.5% rdg to 6% rdg |
Calibration Fee |
|
738 |
10070 - 10401 |
Vacuum Gauge (absolute pressure : spinning rotor gauge) |
10 Pa to 10-3 Pa |
0.6% rdg to 4.5% rdg |
Calibration Fee |
|
739 |
10070 - 10501 |
Additional cost for electrical calibration (which the accuracy is not better than +/-0.01% rdg) |
|
Calibration Fee |
||
740 |
10070 - 10502 |
Adjustment charge of pressure and vacuum devices for permanent laboratory calibration |
|
Calibration Fee |
||
741 |
10080 - 10101 |
Liquid Flowmeter (Turbine Flowmeter) |
0.19 L/min to 150* L/min |
0.2%** |
Calibration Fluid : Water |
Calibration Fee |
742 |
10080 - 10102 |
Liquid Flowmeter (with indicator) |
0.19 L/min to 150* L/min |
2% |
Calibration Fee |
|
743 |
10080 - 10103 |
Coriolis Flowmeter (Volumetric method) |
0.2 L/min to 150 L/min |
0.075% |
Calibration Fee |
|
744 |
10080 - 10202 |
Gas Flowmeter with display in standard flow (molbloc-L) |
100 cm3/min to 24000 cm3/min |
0.25% |
Calibration Gas: Dry Air Reference Conditions @ 0?C, 101.325 kPa |
Calibration Fee |
745 |
10080 - 10204 |
Gas Flowmeter with display in standard flow (molbloc-S) |
1 m3/h to 65 m3/h |
0.23% |
Calibration Gas: Dry Air Reference Conditions @ 0?C, 101.325 kPa |
Calibration Fee |
746 |
10080 - 10205 |
Sonic Nozzle at ambient pressure |
1 m3/h to 100 m3/h |
0.22% |
Calibration Gas: Ambient Air |
Calibration Fee |
747 |
10080 - 10203 |
Gas Flow rate (Gas meter with impluse output) |
1 m3/h to 100 m3/h |
0.20% |
Comparison Method |
Calibration Fee |
748 |
10080 - 10403 |
Gas Flow rate (Gas meter with flow rate output) |
1.2 kg/h to 117 kg/h |
0.20% |
Comparison Method |
Calibration Fee |
749 |
10080 - 10501 |
Liquid Volume (Proving tank: Neck scale type, Weir neck type) |
1 L to 10 L |
0.02% to 0.03% |
Gravimetric Method |
Calibration Fee |
750 |
10080 - 10502 |
<10 L to 20 L |
0.02% to 0.03% |
Gravimetric Method |
Calibration Fee |
|
751 |
10081 - 10101 |
Gas Flowmeter(Volume gas flow rate) |
2 (cm3/min) to 24000 (cm3/min) |
0.23% |
Calibration Fluid : Nitrogen Reference Conditions @ 0 degree C, 101.325 kPa |
Calibration Fee |
752 |
10081 - 10102 |
Gas Flowmeter(Volume gas flow rate) |
2 (cm3/min) to 1 (m3/min) |
0.23% |
Calibration Fluid : Dry Air Reference Conditions @ 0 degree C, 101.325 kPa |
Calibration Fee |
753 |
10081 - 10201 |
Gas Flowmeter(Mass gas flow rate) |
0.043 (mg/s) to 500 (mg/s) |
0.23% |
Calibration Fluid : Nitrogen |
Calibration Fee |
754 |
10081 - 10202 |
Gas Flowmeter(Mass gas flow rate) |
0.043 (mg/s) to 21545 (mg/s) |
0.23% |
Calibration Fluid : Dry Air |
Calibration Fee |
755 |
10040 - 20501 |
Standard Torque Transducer |
? 2,000 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
756 |
10040 - 20502 |
Standard Torque Transducer |
? 1,000 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
757 |
10040 - 20502 |
Standard Torque Transducer |
? 500 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
758 |
10040 - 20502 |
Standard Torque Transducer |
? 200 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
759 |
10040 - 20502 |
Standard Torque Transducer |
? 50 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
760 |
10040 - 20503 |
Standard Torque Transducer |
? 20 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
761 |
10040 - 20601 |
Standard Torque Transfer Wrench |
? 2,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
762 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 1,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
763 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 500 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
764 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 200 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
765 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 50 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
766 |
10040 - 20603 |
Standard Torque Transfer Wrench |
? 20 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
767 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 2,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
768 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 1,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
769 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 500 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
770 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 200 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
771 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 50 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
772 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 20 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
773 |
10050 - 20301 |
V-notch Charpy Impact CRM |
30 J ? 10 J |
According to ISO148-3 |
Reference Materials For Sale |
|
774 |
10050 - 20302 |
V-notch Charpy Impact CRM |
100 J ? 10 J |
According to ISO148-3 |
Reference Materials For Sale |
|
775 |
10050 - 20101 |
Certified Reference Block |
20 HRA to 88 HRA |
0.40 HRA |
Reference Materials For Sale |
|
776 |
10050 - 20101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRB to 100 HRB |
0.40 HRB |
Reference Materials For Sale |
|
777 |
10050 - 20101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRC to 65 HRC |
0.40 HRC |
Reference Materials For Sale |
|
778 |
10050 - 20201 |
Vickers : HV |
HV5, HV10, HV20, HV30, HV50 |
Reference Materials For Sale |
||
779 |
10050 - 20501 |
Vickers : HV |
HV0.1 |
Reference Materials For Sale |
||
780 |
10050 - 20401 |
Brinell Scale: HB |
HB10/3000 |
0.6 % of HB |
Reference Materials For Sale |
|
781 |
10030 - 30201 |
Universal Testing Machine |
Up to 500 kN |
According to ISO 7500-1 : 2004 |
Calibrated by force-measuring device and ascessories shall be provided by customer |
On-site Calibration |
782 |
10040 - 30303 |
Static Torque Calibration devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
On-site Calibration |
|
783 |
10040 - 30302 |
Static Torque Calibration devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
On-site Calibration |
|
784 |
10040 - 30601 |
Adjustment charge of torque device for on-site calibration |
|
On-site Calibration |
||
785 |
10040 - 30501 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench |
40 N?m to 400 N?m |
MT 01/2550 |
On-site Calibration |
|
786 |
10040 - 30502 |
Inter-laboratoty comparison on torque with cross force'- Artifact: Torque wrench |
8 N?m to 40 N?m |
MT 01.1/2551 |
On-site Calibration |
|
787 |
10040 - 30503 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench calibrator |
10 N?m to 200 N?m |
MT 02/2551 |
On-site Calibration |
|
788 |
10040 - 30504 |
Inter-laboratoty comparison on torque with cross force- Artifact: Setting torque wrench |
20 N?m to 330 N?m |
MT 03/2553 |
On-site Calibration |
|
789 |
10050 - 30001 |
Extensometer |
Gauge length up to 200 mm |
According to ISO 9513 |
On-site Calibration |
|
790 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRA to 88 HRA |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
791 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRB to 100 HRB |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
792 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRC to 65 HRC |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
793 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HR15N to 94 HR15N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
794 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
42 HR30N to 86 HR30N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
795 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
67 HR15T to 93 HR15T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
796 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
29 HR30T to 82 HR30T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
797 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HRE to 100 HRE |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
798 |
10050 - 30202 |
Callibration of Testing Machine Vickers Hardness Testing Machine |
HV0.2, HV0.3, HV0.5, HV5, HV10, HV20, HV30, HV50 |
According to ISO 6507-2 |
Note * not including indenter calibration |
On-site Calibration |
799 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB10/3000, HB10/500, HB10/100 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
800 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB5/750, HB5/125, HB5/62.5 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
801 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB2.5/62.5, HB2.5/31.25, HB2.5/15.625 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
802 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB1/30 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
803 |
10050 - 30103 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale B |
MH01 |
On-site Calibration |
|
804 |
10050 - 30203 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale C |
MH02 |
On-site Calibration |
|
805 |
10050 - 30303 |
Inter-laboratory comparison on hardness measurement- Artifact hardness testing machine |
Rockwell Scale A, B and C |
MH03 |
On-site Calibration |
|
806 |
10050 - 30403 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
HV5, HV10 |
MH04 |
On-site Calibration |
|
807 |
10060 - 30101 |
Absolute Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 10 ?Gal (0.01 ppm) |
This price is for overseas customer; for domestic customer the price to be discussed |
On-site Calibration |
808 |
10060 - 30102 |
Local Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 180 ?Gal (0.18 ppm) |
Using relative method |
On-site Calibration |
809 |
10011 - 10001 |
Mass Standard |
1 kg |
class E0 |
Trace to BIPM (Mass standard 1 kg ;Stainless Steel ) in air |
Calibration Fee |
810 |
10011 - 10101 |
Weight or Weight set |
1 mg to 1 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
811 |
10011 - 10102 |
Weight or Weight set |
2 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
812 |
10011 - 10103 |
Weight or Weight set |
5 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
813 |
10011 - 10104 |
Weight or Weight set |
10 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
814 |
10011 - 10105 |
Weight or Weight set |
20 kg |
Class E1 |
Mass and Conventional mass |
Calibration Fee |
815 |
10011 - 10201 |
Weight or Weight Set |
1 mg to 1 kg |
Class E2 |
Conventional mass |
Calibration Fee |
816 |
10011 - 10202 |
Weight or Weight Set |
2 kg |
Class E2 |
Conventional mass |
Calibration Fee |
817 |
10011 - 10203 |
Weight or Weight Set |
5 kg |
Class E2 |
Conventional mass |
Calibration Fee |
818 |
10011 - 10204 |
Weight or Weight Set |
10 kg |
Class E2 |
Conventional mass |
Calibration Fee |
819 |
10011 - 10205 |
Weight or Weight Set |
20 kg |
Class E2 |
Conventional mass |
Calibration Fee |
820 |
10011 - 10206 |
Weight or Weight Set |
50 kg |
Class E2 |
Conventional mass |
Calibration Fee |
821 |
10011 - 10301 |
Weight or Weight Set |
1 mg to 1 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
822 |
10011 - 10302 |
Weight or Weight Set |
2 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
823 |
10011 - 10303 |
Weight or Weight Set |
5 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
824 |
10011 - 10304 |
Weight or Weight Set |
10 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
825 |
10011 - 10305 |
Weight or Weight Set |
20 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
826 |
10011 - 10306 |
Weight or Weight Set |
50 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
827 |
10011 - 10307 |
Weight or Weight Set |
100 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
828 |
10011 - 10308 |
Weight or Weight Set |
200 kg |
Class F1 and lower |
Conventional mass |
Calibration Fee |
829 |
10011 - 10401 |
Weight or Weight Set |
500 kg |
Class F2 and lower |
Conventional mass |
Calibration Fee |
830 |
10011 - 10402 |
Weight or Weight Set |
1000 kg |
Class F2 and lower |
Conventional mass |
Calibration Fee |
831 |
10011 - 10501 |
Weight or Weight Set |
2000 kg |
Class M1 and lower |
Conventional mass |
Calibration Fee |
832 |
10012 - 10101 |
Volume magnetic susceptibility of weight |
1 g to 20 kg |
In the range of 10% to 20% |
By the susceptometer method |
Calibration Fee |
833 |
10013 - 10101 |
Surface roughness (Ra,Rz) of weight |
Up to 5 mm |
where Zm (unit nm) being measured value of weight |
Nominal weight range 1 g to 1 kg |
Calibration Fee |
834 |
10021 - 10101 |
Density and volume of weight |
1 g to 1 kg |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
|
835 |
10021 - 10101 |
Density and volume of weight |
1 g |
120 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
836 |
10021 - 10101 |
Density and volume of weight |
2 g |
60 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
837 |
10021 - 10101 |
Density and volume of weight |
5 g |
20 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
838 |
10021 - 10101 |
Density and volume of weight |
10 g |
15 kg/m3, 0.002 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
839 |
10021 - 10101 |
Density and volume of weight |
20 g |
10 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
840 |
10021 - 10101 |
Density and volume of weight |
50 g |
5.6 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
841 |
10021 - 10101 |
Density and volume of weight |
100 g |
4.4 kg/m3, 0.004 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
842 |
10021 - 10101 |
Density and volume of weight |
200 g |
3.8 kg/m3, 0.007 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
843 |
10021 - 10101 |
Density and volume of weight |
500 g |
2.7 kg/m3, 0.018 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
844 |
10021 - 10101 |
Density and volume of weight |
1 kg |
2.6 kg/m3, 0.036 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
845 |
10021 - 10101 |
Density and volume of weight |
2 kg |
6.8 kg/m3, 0.21 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
846 |
10021 - 10101 |
Density and volume of weight |
5 kg |
3.3 kg/m3, 0.25 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
847 |
10021 - 10101 |
Density and volume of weight |
10 kg |
2.4 kg/m3, 0.4 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
848 |
10021 - 10101 |
Density and volume of weight |
20 kg |
2 kg/m3, 0.7 cm3 |
Any class which no cavity by hydrostatic weighing method |
Calibration Fee |
849 |
10021 - 10102 |
Density and volume of solid artifact |
2700 kg/m3 to 9000 kg/m3 1.25 cm3 to 110 cm3 |
0.6 to 120 kg/m3 0.0020 to 0.25 cm3 |
Traceable to SI units via Silicon Cylinder |
Calibration Fee |
850 |
10021 - 10301 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.100 kg/m3 |
scale division 0.2 kg/m3 |
Calibration Fee |
851 |
10021 - 10302 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.125 kg/m3 |
scale division 0.5 kg/m3 |
Calibration Fee |
852 |
10021 - 10303 |
Density Hydrometer |
600 to 2000 kg/m3 |
0.25 kg/m3 |
scale division more than 0.5 kg/m3 |
Calibration Fee |
853 |
10021 - 10304 |
Specific Gravity Hydrometer |
0.590 sp/gr to 2.025 sp/gr |
0.00010 sp/gr |
Calibration Fee |
|
854 |
10021 - 10305 |
API Hydrometer |
-1 ?API to 101 ?API |
0.030 ?API |
Calibration Fee |
|
855 |
10021 - 10306 |
Brix Hydrometer |
0 ?Brix to 90 ?Brix |
0.30 ?Brix |
Calibration Fee |
|
856 |
10021 - 10307 |
Baum? Hydrometer |
0 B? to 100 B? |
0.030 B? |
Calibration Fee |
|
857 |
10021 - 10308 |
Glass Volume Alcoholometer |
0 %vol to 100 %vol |
0.10 %vol |
Calibration Fee |
|
858 |
10021 - 10401 |
Density of liquid at ambient temperature and pressure |
600 to 1500 kg/m3 |
0.2 to 2.0 kg/m3 |
By hydrostatic weighing method |
Calibration Fee |
859 |
10021 - 10501 |
Density Meter, Benchtop oscillation type |
700 to 1000 kg/m3 |
0.05 kg/m3 |
By direct comparison with reference fluids |
Calibration Fee |
860 |
10030 - 10101 |
Force-proving instrument |
1 kN to 110* kN |
Accroding to ISO 376:2011 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
861 |
10030 - 10102 |
Force-proving instrument |
0.1 kN to 1.5 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
862 |
10030 - 10103 |
Force-proving instrument |
0.2 kN to 5 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
863 |
10030 - 10104 |
Force-proving instrument |
16 kN to 500 kN |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
864 |
10030 - 10105 |
Force-proving instrument |
50 N to 500 N |
Class 00 to 2 |
Calibrated by deadweight force standard machine. Digital indicator shall be provided by customer. |
Calibration Fee |
865 |
10030 - 10201 |
Force-proving instrument |
20 kN to 100 kN |
Accroding to ISO 376:2011 |
Calibrated by force-comparator machine. Digital indicator shall be provided by customer. |
Calibration Fee |
866 |
10030 - 10202 |
Force-proving instrument |
> 100 kN to 500 kN |
Class 0.5 to 2 |
Calibration Fee |
|
867 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
0.1 N?m to 1 N?m |
DIN 51309, 0.015% |
Calibration Fee |
|
868 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
1 N?m to 10 N?m |
DIN 51309, 0.01%, 0.03% |
Calibration Fee |
|
869 |
10040 - 10101 |
Static Torque Measuring Devices(Torque Transducer) |
10 N?m to 1,000 N?m |
DIN 51309, 0.01% |
Calibration Fee |
|
870 |
10040 - 10202 |
Static Torque Transfer Wrenches |
1 N?m to 10 N?m |
DAkkS-DKD-R 3-7, 0.04% |
Calibration Fee |
|
871 |
Static Torque Transfer Wrenches |
10 N?m to 2,000 N?m |
DAkkS-DKD-R 3-7, 0.03% |
Calibration Fee |
||
872 |
10040 - 10303 |
Static Torque Calibration Devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
Calibration Fee |
|
873 |
10040 - 10302 |
Static Torque Calibration Devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
Calibration Fee |
|
874 |
10040 - 10401 |
Hand Torque Tools - Wrench,Torsion or Flexion Bar |
1 N?m to 1,000 N?m |
ISO 6789, 1% |
Calibration Fee |
|
875 |
10040 - 10402 |
Hand Torque Tools- Screwdriver, with Scale or Dial or Display |
1 N?m to 10 N?m |
ISO 6789, 1% |
Calibration Fee |
|
876 |
10040 - 10601 |
Adjustment charge of torque device for permanent laboratory calibration |
|
Calibration Fee |
||
877 |
10050 - 10101 |
Recalibration of Reference Block |
20 HRA to 88 HRA |
0.40 HRA |
Reference Block shall be providedby client. |
Calibration Fee |
878 |
10050 - 10101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRB to 100 HRB |
0.40 HRB |
Reference Block shall be providedby client. |
Calibration Fee |
879 |
10050 - 10101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRC to 70 HRC |
0.40 HRC |
Reference Block shall be providedby client. |
Calibration Fee |
880 |
10050 - 10201 |
Vickers : HV |
HV5, HV10, HV20, HV30, HV50 |
Calibration Fee |
||
881 |
10050 - 10501 |
Vickers : HV |
HV0.1 |
Calibration Fee |
||
882 |
10050 - 10401 |
Brinell Scale: HB |
HB10/3000 |
0.6 % of HB |
Calibration Fee |
|
883 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD-N |
According ISO 18898 |
Calibration Fee |
|
884 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD Pocket |
According ISO 18898 |
Calibration Fee |
|
885 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
IRHD-M |
According ISO 18898 |
Calibration Fee |
|
886 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type A |
According ISO 18898 |
Calibration Fee |
|
887 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type D |
According ISO 18898 |
Calibration Fee |
|
888 |
10050 - 10302 |
Elastomer Hardness Testing Machine |
Durometer Type AO |
According ISO 18898 |
Calibration Fee |
|
889 |
10060 - 10101 |
Gas Pressure Balances |
Up to 7 MPa |
> 5x10-4 x Pe to 1x10-4 x Pe |
1. Price per 1 piston & |
Calibration Fee |
890 |
10060 - 10102 |
Gas Pressure Balances |
Up to 7 MPa |
< 1x10-4 x Pe |
cylinder assembly |
Calibration Fee |
891 |
10060 - 10103 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
> 5x10-4 x Pe |
2. Calibration of weight |
Calibration Fee |
892 |
10060 - 10104 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
5x10-4 x Pe to 1x10-4 x Pe |
set is included. |
Calibration Fee |
893 |
10060 - 10105 |
Gas Pressure Balances |
>7 MPa to 40 MPa |
< 1x10-4 x Pe |
Calibration Fee |
|
894 |
10060 - 10201 |
Hydraulic Pressure Balances |
Up to 200 MPa |
> 5x10-4 x Pe to 1x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
895 |
10060 - 10202 |
Hydraulic Pressure Balances |
Up to 200 MPa |
< 1x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
896 |
10060 - 10203 |
Hydraulic Pressure Balances |
> 200 MPa to 500 MPa |
> 5x10-4 x Pe to 2x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
897 |
10060 - 10204 |
Hydraulic Pressure Balances |
> 200 MPa to 500 MPa |
< 2x10-4 x Pe |
1. Price per 1 piston & cylinder assembly 2. Calibration of weight set is included. |
Calibration Fee |
898 |
10060 - 10313 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Not smaller than 0.2 mbar |
Calibration Fee |
|
899 |
10060 - 10314 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Not smaller than 1 mbar |
Calibration Fee |
|
900 |
10061 - 10319 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to ?100 kPa |
Smaller than 0.2 mbar |
Calibration Fee |
|
901 |
10060 - 10315 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to -15 kPa |
> 1x10-3 x Pe |
Calibration Fee |
|
902 |
10060 - 10316 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to -15 kPa |
< 1x10-3 x Pe |
Calibration Fee |
|
903 |
10060 - 10301 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
> 6 x 10-3 x Pe |
Calibration Fee |
|
904 |
10060 - 10302 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
905 |
10060 - 10303 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
- 1 kPa to 0 kPa |
< 1x10-3 x Pe, but not smaller than 0,003 mbar |
Calibration Fee |
|
906 |
10060 - 10304 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
> 6x10-3 x Pe |
Calibration Fee |
|
907 |
10060 - 10305 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
908 |
10060 - 10306 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 3 kPa |
< 1x10-3 x Pe, but not smaller than 0,003 mbar |
Calibration Fee |
|
909 |
10060 - 10317 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 15 kPa |
> 1x10-3 x Pe |
Calibration Fee |
|
910 |
10060 - 10318 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
0 kPa to 15 kPa |
< 1x10-3 x Pe |
Calibration Fee |
|
911 |
10060 - 10307 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
10 kPa to 7 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
912 |
10060 - 10308 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
1,5 kPa to 7 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
913 |
10060 - 10309 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
1,5 kPa to 7 MPa |
< 1x10-3 x Pe |
Calibration Fee |
|
914 |
10060 - 10310 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
915 |
10060 - 10311 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
916 |
10060 - 10312 |
Gas Pressure Measuring Instruments (gauge pressure, Pe) |
> 7 MPa to 100 MPa |
< 1x10-3 x Pe |
Calibration Fee |
|
917 |
10060 - 10401 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
80 kPa to 115 kPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
918 |
10060 - 10402 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
80 kPa to 115 kPa |
Not smaller than 0.35 mbar |
Calibration Fee |
|
919 |
10060 - 10405 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
0 kPa to 15 kPa |
> 1x10-3 x Pabs |
Calibration Fee |
|
920 |
10060 - 10406 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
0 kPa to 15 kPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
921 |
10060 - 10403 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
2 kPa to 7 MPa |
Not smaller than 0.35 mbar |
Calibration Fee |
|
922 |
10060 - 10404 |
Gas Pressure Measuring Instruments (absolute pressure, Pabs) |
1,5 kPa to 40 MPa |
> 1x10-4 x Pabs |
Calibration Fee |
|
923 |
10060 - 10501 |
Mercury Barometers |
85 kPa to 105 kPa |
Not smaller than 0.35 mbar |
Cistern type |
Calibration Fee |
924 |
10060 - 10502 |
Mercury Barometers |
85 kPa to 105 kPa |
Not smaller than 0.35 mbar |
Fortin type |
Calibration Fee |
925 |
10060 - 10601 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
> 6x10-3 x Pe |
Calibration Fee |
|
926 |
10060 - 10602 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
6x10-3 x Pe to 1x10-3 x Pe |
Calibration Fee |
|
927 |
10060 - 10603 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
up to 200 MPa |
< 1 x 10-3 x Pe |
Calibration Fee |
|
928 |
10060 - 10604 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
> 200 MPa to 500 MPa |
> 1 x 10-3 x Pe |
Calibration Fee |
|
929 |
10060 - 10605 |
Hydraulic Pressure Measuring Instruments (gauge pressure, Pe) |
> 200 MPa to 500 MPa |
< 1 x 10-3 x Pe |
Calibration Fee |
|
930 |
10060 - 10801 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
> 6x10-3 x Pabs |
Calibration Fee |
|
931 |
10060 - 10802 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
6x10-3 x Pabs to 1x10-3 x Pabs |
Calibration Fee |
|
932 |
10060 - 10803 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
0,1 MPa to 200 MPa |
< 1 x 10-3 x Pabs |
Calibration Fee |
|
933 |
10060 - 10804 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
> 200 MPa to 500 MPa |
> 1 x 10-3 x Pabs |
Calibration Fee |
|
934 |
10060 - 10805 |
Hydraulic Pressure Measuring Instruments (absolute pressure, Pabs) |
> 200 MPa to 500 MPa |
< 1x10-3 x Pabs |
Calibration Fee |
|
935 |
10060 - 10701 |
Gas Differential Pressure at High Static Line ressure (not higher than 40 MPa), DP |
350 kPa maximum differential pressure |
3.5 x 10-5 x DP, but not less than 2.9 Pa |
Price per 1 range of differential pressure and 1 range of high static line pressure |
Calibration Fee |
936 |
10070 - 10101 |
Vacuum Gauges (absolute pressure : pirani gauge, thermal conductivity gauge) |
105 Pa to 10-1 Pa |
0.3% rdg to 1% rdg |
Calibration 10 points minimum |
Calibration Fee |
937 |
10070 - 10201 |
Vacuum Gauges (absolute pressure : capacitance diaphragm gauge) |
105 Pa to 10-1 Pa |
0.2% rdg to 0.45% rdg |
Calibration 3 decades for the head range (1000, 100,10, 1) torr |
Calibration Fee |
938 |
10070 - 10201 |
Vacuum Gauges (absolute pressure : capacitance diaphragm gauge) |
105 Pa to 10-1 Pa |
0.2% rdg to 0.45% rdg |
Calibration 2 decades for the head range 0.1 torr |
Calibration Fee |
939 |
10070 - 10301 |
Vacuum Gauges (absolute pressure : hot cathode ion gauge, cold cathode ion gauge) |
10-1 Pa to 10-5 Pa |
0.5% rdg to 6% rdg |
Calibration Fee |
|
940 |
10070 - 10401 |
Vacuum Gauge (absolute pressure : spinning rotor gauge) |
10 Pa to 10-3 Pa |
0.6% rdg to 4.5% rdg |
Calibration Fee |
|
941 |
10070 - 10501 |
Additional cost for electrical calibration (which the accuracy is not better than +/-0.01% rdg) |
|
Calibration Fee |
||
942 |
10070 - 10502 |
Adjustment charge of pressure and vacuum devices for permanent laboratory calibration |
|
Calibration Fee |
||
943 |
10080 - 10101 |
Liquid Flowmeter (Turbine Flowmeter) |
0.19 L/min to 150* L/min |
0.2%** |
Calibration Fluid : Water |
Calibration Fee |
944 |
10080 - 10102 |
Liquid Flowmeter (with indicator) |
0.19 L/min to 150* L/min |
2% |
Calibration Fee |
|
945 |
10080 - 10103 |
Coriolis Flowmeter (Volumetric method) |
0.2 L/min to 150 L/min |
0.075% |
Calibration Fee |
|
946 |
10080 - 10202 |
Gas Flowmeter with display in standard flow (molbloc-L) |
100 cm3/min to 24000 cm3/min |
0.25% |
Calibration Gas: Dry Air Reference Conditions @ 0?C, 101.325 kPa |
Calibration Fee |
947 |
10080 - 10204 |
Gas Flowmeter with display in standard flow (molbloc-S) |
1 m3/h to 65 m3/h |
0.23% |
Calibration Gas: Dry Air Reference Conditions @ 0?C, 101.325 kPa |
Calibration Fee |
948 |
10080 - 10205 |
Sonic Nozzle at ambient pressure |
1 m3/h to 100 m3/h |
0.22% |
Calibration Gas: Ambient Air |
Calibration Fee |
949 |
10080 - 10203 |
Gas Flow rate (Gas meter with impluse output) |
1 m3/h to 100 m3/h |
0.20% |
Comparison Method |
Calibration Fee |
950 |
10080 - 10403 |
Gas Flow rate (Gas meter with flow rate output) |
1.2 kg/h to 117 kg/h |
0.20% |
Comparison Method |
Calibration Fee |
951 |
10080 - 10501 |
Liquid Volume (Proving tank: Neck scale type, Weir neck type) |
1 L to 10 L |
0.02% to 0.03% |
Gravimetric Method |
Calibration Fee |
952 |
10080 - 10502 |
<10 L to 20 L |
0.02% to 0.03% |
Gravimetric Method |
Calibration Fee |
|
953 |
10081 - 10101 |
Gas Flowmeter(Volume gas flow rate) |
2 (cm3/min) to 24000 (cm3/min) |
0.23% |
Calibration Fluid : Nitrogen Reference Conditions @ 0 degree C, 101.325 kPa |
Calibration Fee |
954 |
10081 - 10102 |
Gas Flowmeter(Volume gas flow rate) |
2 (cm3/min) to 1 (m3/min) |
0.23% |
Calibration Fluid : Dry Air Reference Conditions @ 0 degree C, 101.325 kPa |
Calibration Fee |
955 |
10081 - 10201 |
Gas Flowmeter(Mass gas flow rate) |
0.043 (mg/s) to 500 (mg/s) |
0.23% |
Calibration Fluid : Nitrogen |
Calibration Fee |
956 |
10081 - 10202 |
Gas Flowmeter(Mass gas flow rate) |
0.043 (mg/s) to 21545 (mg/s) |
0.23% |
Calibration Fluid : Dry Air |
Calibration Fee |
957 |
10040 - 20501 |
Standard Torque Transducer |
? 2,000 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
958 |
10040 - 20502 |
Standard Torque Transducer |
? 1,000 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
959 |
10040 - 20502 |
Standard Torque Transducer |
? 500 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
960 |
10040 - 20502 |
Standard Torque Transducer |
? 200 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
961 |
10040 - 20502 |
Standard Torque Transducer |
? 50 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
962 |
10040 - 20503 |
Standard Torque Transducer |
? 20 N?m |
DIN 51309 Class 0.2, 0.1, 0.05 |
Reference Materials For Sale |
|
963 |
10040 - 20601 |
Standard Torque Transfer Wrench |
? 2,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
964 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 1,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
965 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 500 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
966 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 200 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
967 |
10040 - 20602 |
Standard Torque Transfer Wrench |
? 50 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
968 |
10040 - 20603 |
Standard Torque Transfer Wrench |
? 20 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Reference Materials For Sale |
|
969 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 2,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
970 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 1,000 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
971 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 500 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
972 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 200 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
973 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 50 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
974 |
10040-20604 |
Standard Torque Transfer Wrench Model: TW-MCS01 |
? 20 N?m |
DAkkS-DKD-R 3-7 Class 0.2 |
Standard Option 1. Temperature compensation on zero signal 2. Temperature compensation on span signal 3. Zero balance 4. Measurement and check signals |
Reference Materials For Sale |
975 |
10050 - 20301 |
V-notch Charpy Impact CRM |
30 J ? 10 J |
According to ISO148-3 |
Reference Materials For Sale |
|
976 |
10050 - 20302 |
V-notch Charpy Impact CRM |
100 J ? 10 J |
According to ISO148-3 |
Reference Materials For Sale |
|
977 |
10050 - 20101 |
Certified Reference Block |
20 HRA to 88 HRA |
0.40 HRA |
Reference Materials For Sale |
|
978 |
10050 - 20101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRB to 100 HRB |
0.40 HRB |
Reference Materials For Sale |
|
979 |
10050 - 20101 |
Rockwell Scale : HRA, HRB, HRC |
20 HRC to 65 HRC |
0.40 HRC |
Reference Materials For Sale |
|
980 |
10050 - 20201 |
Vickers : HV |
HV5, HV10, HV20, HV30, HV50 |
Reference Materials For Sale |
||
981 |
10050 - 20501 |
Vickers : HV |
HV0.1 |
Reference Materials For Sale |
||
982 |
10050 - 20401 |
Brinell Scale: HB |
HB10/3000 |
0.6 % of HB |
Reference Materials For Sale |
|
983 |
10030 - 30201 |
Universal Testing Machine |
Up to 500 kN |
According to ISO 7500-1 : 2004 |
Calibrated by force-measuring device and ascessories shall be provided by customer |
On-site Calibration |
984 |
10040 - 30303 |
Static Torque Calibration devices- Torque Wrench Calibration Devices |
1 N?m to 2,000 N?m |
DAkkS-DKD-R 3-8 0.2% |
On-site Calibration |
|
985 |
10040 - 30302 |
Static Torque Calibration devices- Torque Screwdriver Calibration Devices |
1 N?m to 10 N?m |
Based on DAkkS-DKD-R 3-8 1% |
On-site Calibration |
|
986 |
10040 - 30601 |
Adjustment charge of torque device for on-site calibration |
|
On-site Calibration |
||
987 |
10040 - 30501 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench |
40 N?m to 400 N?m |
MT 01/2550 |
On-site Calibration |
|
988 |
10040 - 30502 |
Inter-laboratoty comparison on torque with cross force'- Artifact: Torque wrench |
8 N?m to 40 N?m |
MT 01.1/2551 |
On-site Calibration |
|
989 |
10040 - 30503 |
Inter-laboratoty comparison on torque with cross force- Artifact: Torque wrench calibrator |
10 N?m to 200 N?m |
MT 02/2551 |
On-site Calibration |
|
990 |
10040 - 30504 |
Inter-laboratoty comparison on torque with cross force- Artifact: Setting torque wrench |
20 N?m to 330 N?m |
MT 03/2553 |
On-site Calibration |
|
991 |
10050 - 30001 |
Extensometer |
Gauge length up to 200 mm |
According to ISO 9513 |
On-site Calibration |
|
992 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRA to 88 HRA |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
993 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRB to 100 HRB |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
994 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
20 HRC to 65 HRC |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
995 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HR15N to 94 HR15N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
996 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
42 HR30N to 86 HR30N |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
997 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
67 HR15T to 93 HR15T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
998 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
29 HR30T to 82 HR30T |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
999 |
10050 - 30102 |
Callibration of Testing Machine Rockwell Hardness Testing Machine |
70 HRE to 100 HRE |
According to ISO 6508-2 |
Note * not including indenter calibration |
On-site Calibration |
1000 |
10050 - 30202 |
Callibration of Testing Machine Vickers Hardness Testing Machine |
HV0.2, HV0.3, HV0.5, HV5, HV10, HV20, HV30, HV50 |
According to ISO 6507-2 |
Note * not including indenter calibration |
On-site Calibration |
1001 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB10/3000, HB10/500, HB10/100 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
1002 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB5/750, HB5/125, HB5/62.5 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
1003 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB2.5/62.5, HB2.5/31.25, HB2.5/15.625 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
1004 |
10050 - 30402 |
Callibration of Testing Machine Brinell Hardness testing machine |
HB1/30 |
According to ISO 6506-2 |
Note * not including indenter calibration |
On-site Calibration |
1005 |
10050 - 30103 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale B |
MH01 |
On-site Calibration |
|
1006 |
10050 - 30203 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
Scale C |
MH02 |
On-site Calibration |
|
1007 |
10050 - 30303 |
Inter-laboratory comparison on hardness measurement- Artifact hardness testing machine |
Rockwell Scale A, B and C |
MH03 |
On-site Calibration |
|
1008 |
10050 - 30403 |
Inter-laboratory comparison on hardness measurement- Artifact hardness specimen |
HV5, HV10 |
MH04 |
On-site Calibration |
|
1009 |
10060 - 30101 |
Absolute Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 10 ?Gal (0.01 ppm) |
This price is for overseas customer; for domestic customer the price to be discussed |
On-site Calibration |
1010 |
10060 - 30102 |
Local Gravity |
9.75 m/s2 to 9.85 m/s2 |
Not smaller than 180 ?Gal (0.18 ppm) |
Using relative method |
On-site Calibration |