บริการสอบเทียบของสถาบันมาตรวิทยาแห่งชาติ
Electrical Metrology
Item No. |
Code |
Description |
Range |
Accuracy |
Remark |
Service |
|---|---|---|---|---|---|---|
1 |
09010-10110 |
DC Voltage Standard |
1.018 V |
0.9 mV/V |
Calibration Fee |
|
2 |
09010-10110 |
DC Voltage Standard |
10 V |
0.4 mV/V |
Calibration Fee |
|
3 |
09010-10111 |
Standard Cell |
1 V / 1.018 V |
0.9 mV/V |
Calibration Fee |
|
4 |
09010-10112 |
DC Voltage Standard |
1 V / 1.018 V |
0.09 mV/V |
Compared against JJVS maintained by NIMT. |
Calibration Fee |
5 |
09010-10112 |
DC Voltage Standard |
10 V |
0.03 mV/V |
Compared against JJVS maintained by NIMT. |
Calibration Fee |
6 |
09030-10210 |
DC Standard Resistor |
1 kW |
0.14 mW/W |
Compared against QHR standard maintain by NIMT using automatic resistance bridge. |
Calibration Fee |
7 |
09030-10211 |
Standard Resistor 1 W |
1 W at 50 mA |
? 0.21 mW/W |
Used a group of 1 W standard. |
Calibration Fee |
8 |
09030-10212 |
Standard Resistor 10 kW |
10 kW at 0.3 mA |
? 1.4 mW/W |
Used a group of 10 kW standard. |
Calibration Fee |
9 |
09030-10213 |
Standard Resistor |
100 ?? at 200 A |
As Specification |
Used DCC bridge and 400 Amp range extender. |
Calibration Fee |
10 |
09030-10214 |
Standard Resistor (Calibrate in oil or in air) |
1 mW to 10 kW |
As specification |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
11 |
09030-10215 |
Standard Resistor (Calibrate in oil or in air) |
>10 kW to 1GW |
? 500 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
12 |
09030-10216 |
Standard Resistor (Calibrate in oil or in air) |
0 W to 1 TW |
As specification |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
13 |
09030-10217 |
Standard Resistor (Calibrate in oil or in air) |
10 TW at 100 V, 200 V |
3 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
14 |
09030-10217 |
Standard Resistor (Calibrate in oil or in air) |
500 V and 1000 V |
3 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
15 |
09030-10218 |
Decade Resistance Box |
1 mW to 10 MW |
As specification |
Calibration Fee |
|
16 |
09030-10219 |
Decade Resistance Box |
10 MW to 1 TW |
As specification |
Calibration Fee |
|
17 |
09031-10210 |
Resistance Calibrator |
0 W to 100 MW |
As specification |
Calibration Fee |
|
18 |
09030-10220 |
High Resistance Meter |
Up to 1 TW |
As specification |
Calibration Fee |
|
19 |
09030-10221 |
Digital Thermometer (indicator) |
up to 10 MW |
? 5 mW/W |
Calibration Fee |
|
20 |
09030-10222 |
|
? 5 mW/W |
Calibration Fee |
||
21 |
09010-10320 |
Picoampmeter |
2 pA to 200 mA |
5 mV/V to 0.1 mV/V |
Used volt-ampere method. |
Calibration Fee |
22 |
09010-10321 |
Electrometer |
2 nC to 200 ?C |
0.1 mV/V |
Calibration Fee |
|
23 |
09040-10410 |
AC Resistance |
1 W, 25 W, 100 W, 400 W at 60 Hz or 75 Hz |
As Specification |
Calibration Fee |
|
24 |
09040-10411 |
AC Resistor |
1 W to 100 kW @ 1000 Hz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
25 |
09040-10412 |
Additional Measurement at another Frequency |
1 W to 100 kW @ 100 Hz to 100 kHz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
26 |
09040-10413 |
Decade AC Resistor |
1 W to 100 kW @ 1000 Hz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
27 |
09040-10414 |
Additional Measurement at another Frequency |
1 W to 100 kW @ 100 Hz to 100 kHz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
28 |
09040-10420 |
Fixed, Fused Silica Dielectric Standard Capacitors |
10 pF @ 1000 Hz |
0.087 mF/F |
Comparing with a group of 10 pF standards |
Calibration Fee |
29 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
1 pF @ 1000 Hz |
0.71 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
30 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
10 pF @ 1000 Hz |
0.70 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
31 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
100 pF@ 1000 Hz |
0.70 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
32 |
09040-10422 |
Fixed Three Terminal, Nitrogen Dielectric Standard Capacitors |
10 pF 100 pF @ 1000 Hz and 1592 Hz |
1.2 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
33 |
09040-10422 |
Fixed Three Terminal, Nitrogen Dielectric Standard Capacitors |
1000 pF @ 1000 Hz and 1592 Hz |
3.5 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
34 |
09040-10423 |
Two or Three Terminal Mica Dielectric Standard Capacitors |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 1000 Hz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
35 |
09040-10424 |
Additional Measurement at another Frequency |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 100, 120, 200, 400, 500 Hz, 2 kHz, 5 kHz, 10 kHz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
36 |
09040-10425 |
Four-Terminal Pair Capacitance Standard |
1 pF, 10 pF, 100 pF, 1000 pF, 0.01 mF, 0.1 mF and 1 mF @ 1000 Hz |
> 0.12 mF/F |
Measured by precision capacitance bridge, direct measurement, at desired frequency. |
Calibration Fee |
37 |
09040-10426 |
Additional Measurement at another Frequency |
1 pF, 10 pF, 100 pF, 1000 pF, 0.01 mF, 0.1 mF and 1 mF @ 100 Hz to 100 kHz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
38 |
09040-10427 |
Fixed Standard Capacitors |
1 pF to 1 F @ 1000 Hz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
39 |
09040-10428 |
Additional Measurement at another Frequency |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
40 |
09040-10429 |
Decade capacitor |
1 pF to 10 mF @ 1000 Hz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
41 |
09041-10420 |
Decade capacitor |
1 pF to 1 F @ 1000 Hz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
42 |
09041-10421 |
Additional Measurement at another |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
43 |
09041-10422 |
Frequency |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
44 |
09041-10423 |
Precision Capacitance Bridge |
1 pF, 10 pF, 100 pF and 1000 pF @ 1000 Hz or 1592 Hz |
? 1 mF/F |
Calibrated by comparing its reading against the reference standard capacitors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement. |
Calibration Fee |
45 |
09040-10430 |
Fixed Standard Inductors |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 1000 Hz |
> 0.16 mH/H |
Measured by the direct substitution method with the reference standard inductors. |
Calibration Fee |
46 |
09040-10431 |
Additional Measurement at another Frequency |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 12 Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
47 |
09040-10432 |
Fixed standard Inductor |
1 mH to 10 H @ 1 kHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
48 |
09040-10433 |
Additional Measurement at another Frequency |
1 mH to 10 H @ 12 Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
49 |
09040-10434 |
Decade Inductors |
1 mH to 10 H @ 1000 Hz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
50 |
09040-10435 |
Additional Measurement at another Frequency |
1 mH to 10 H @ 12Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
51 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 100, 120, 200, 400, 500 Hz, 1 kHz, 2 kHz, 5 kHz, 10 kHz |
> 0.12 mF/F |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
52 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
1 pF, 10 pF, 100 pF, 1000 pF @ 1000 Hz* |
> 0.12 mF/F |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
53 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 1000 Hz |
> 0.16 mH/H |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
54 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
1 W, 10 W, 100 W, 1000 W @ 1 kHz |
> 0.20 mW/W |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
55 |
09020-10510 |
AC/DC Transfer Standard |
AC-DC Transfer Difference 2 mV to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
56 |
09020-10511 |
Thermal Transfer Standard |
AC-DC Transfer Difference 0.5 V to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
57 |
09020-10512 |
Thermal Voltage Converter Standard |
AC-DC Transfer Difference 0.5 V to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
58 |
09020-10520 |
AC Measurement Standard |
AC-DC Transfer Difference 10 mV to 20 V Frequency: 10 Hz to 1 MHz |
As specification |
Excluded WB option. |
Calibration Fee |
59 |
09020-10521 |
AC Measurement Standard |
AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
As specification |
Included WB option. |
Calibration Fee |
60 |
09020-10522 |
Alternating Voltage Measurement Standard |
AC Voltage Deviation 100 mV to 20 V Frequency: 10 Hz to 1 MHz |
14 mV/V to 0.35 mV/V |
Calibration Fee |
|
61 |
09020-10522 |
Alternating Voltage Measurement Standard |
AC Voltage Deviation > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
15 mV/V to 0.12 mV/V |
Calibration Fee |
|
62 |
09020-10560 |
AC Voltage Current Standard |
AC Voltage 100 mV to 1000V Frequency 60 Hz and 400 Hz |
55 mV/V to 6 mV/V |
Applied direct measurement method by AC measurement standard. |
Calibration Fee |
63 |
09020-10560 |
AC Voltage Current Standard |
AC Current 100 mA to 30 A Frequency 60 Hz and 400 Hz |
0.1 mA/A to 0.2 mA/A |
Applied direct measurement method by AC measurement standard. |
Calibration Fee |
64 |
09020-10561 |
Multifunction Transfer Standard |
As specification |
As specification |
Calibration Fee |
|
65 |
09020-10610 |
AC/DC Current Shunt |
AC-DC Transfer Difference 5 mA to 30 A Frequency: 10 Hz to 100 kHz |
As specification |
Calibration Fee |
|
66 |
09050-10710 |
Standard Watt Converter |
Volt : 600 V Current : 100 A AC Power : 60 kW Frequency : 50 Hz, 60 Hz Power Factor : + 0 to 1 |
> 55 mW/VA |
Calibration Fee |
|
67 |
09050-10711 |
AC Wattmeter, Digital Power Meter |
Volt : 1000 V Current : 80 A AC Power : 80 kW Frequency : 15 Hz to 450 Hz Power Factor : + 0 to 1 |
> 100 mW/VA |
Calibration Fee |
|
68 |
09050-10712 |
Energy Meter |
Eneregy 1.5 Ws to 3600 kWs Voltage 15 V to 600 V Current 0.1 A to 100 A Power Factor 1 to 0 (Inductive or Capacitive) Frequency 50 Hz to 60 Hz Measurement time 1s to 60 s |
? 100 mWh/ VAh |
Applied the known voltage,current and power from the AC power calibration system and measure pulse output against the time standard. |
Calibration Fee |
69 |
09050-10713 |
Electrical Power Source |
Power 1.5 W to 60 kW Frequency 50 Hz to 60 Hz Power Factor 1 to 0 (Inductive or Capacitive) |
Power ? 70 mW/VA |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
70 |
09050-10713 |
Electrical Power Source |
Voltage 3 V to 1000 V |
Voltage ? 30 mV/V |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
71 |
09050-10713 |
Electrical Power Source |
Current 0.05 A to 100 A |
Current ? 30 mA/A |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
72 |
09050-10713 |
Electrical Power Source |
Frequency 15 Hz to 6 kHz |
phase ? 0.005o |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
73 |
09050-10714 |
DC Power Meter |
Power: 1mW to 20 kW Voltage : 100 mV to 1000 V Current : 10 mA to 20 A |
? 40 mW/ W |
Applied the comparision method. |
Calibration Fee |
74 |
09050-10715 |
Energy Source |
Eneregy 41.67 mWh to 3.333 kWh Power: 0.5 W to 20 kW Voltage: 10 V to 1000 V Current: 0.05 A to 20 A Power Factor: 1 Time : 5 minute to 10 minute Frequency: 50 Hz to 60 Hz |
> 0.12 % |
Calibration Fee |
|
75 |
09050-10920 |
Phase Meter |
Phase Angle : 0.000o to + 360.000o Frequency : 15 Hz to 100 kHz Amplitde : 50 mVrms to 120 Vrms |
> 0.01o |
Calibration Fee |
|
76 |
09050-10921 |
Phase Source |
0.000o to 999.999o 50 mV to 120 Vrms 10 Hz to 100 kHz |
> 0.005 o |
Calibration Fee |
|
77 |
09050-10930 |
Power Analyzer, Harmonics and Flicker |
Output Voltage : 1020 V Output Current : 80 A Frequency : 20 Hz and up to 1 kHz Harmonics : 100th, up to 6 kHz Flicker : 16 Hz to 9 kHz |
Voltage > 100 mV/V Current > 150 mA/A Power > 200 mW/VA Frequency > 50 mHz/Hz |
Calibration Fee |
|
78 |
09050-10931 |
Power Ananlyzer, Dips/ Swells |
Voltage: 10 V to 1000 V Current Current : 0.05 A to 20A Dip/Swell amlitude : 10 % to 140 % of nominal amplitude Time : 1 ms to 1 minute Frequency : 16 Hz to 850 Hz |
? 0.07 % |
Calibration Fee |
|
79 |
09060-10810 |
DC High Voltage Divider |
-10 kV to 10 kV |
30 x 10-6 (Division Ratio) |
Compared against DC high voltage reference system. |
Calibration Fee |
80 |
09060-10811 |
DC High Voltage Divider |
>10 kV to 100 kV |
30 x 10-6 (Division Ratio) |
Compared against DC high voltage reference system. |
Calibration Fee |
81 |
09060-10812 |
DC High Voltage Source |
-10 kV to 100 kV |
30 mV/V |
Compared against DC high voltage reference system. |
Calibration Fee |
82 |
09060-10813 |
DC High Voltage Meter |
-10 kV to 100 kV |
As specification |
Compared against DC high voltage reference system. |
Calibration Fee |
83 |
09060-10820 |
High Voltage Capacitance & Dissipation Factor |
Capacitance 10 pF to 1000 pF Voltage:10 kV to 100 kV Frequency : 50 Hz Dissipation: 50 x 10-6 to 1 x 10-3 |
? 80 mF/F for Capacitance ? 50 x 10-6 for dissipation factor |
Compared against standard capacitor using AC high voltage capacitance and inductance bridge. |
Calibration Fee |
84 |
09060-10821 |
High Voltage Capacitance & Dissipation Factor |
Capacitance 10 pF to 1000 pF Voltage:10 kV to 200 kV Frequency : 50 Hz Dissipation: 50 x 10-6 to 1 x 10-3 |
Compared against standard capacitor using AC high voltage capacitance and inductance bridge. |
Calibration Fee |
|
85 |
09060-10830 |
AC High Voltage Divider |
1 kV to 200 kV @ 50 Hz |
? 0.4 % (Scale Factor) |
Compared against AC high voltage reference system. |
Calibration Fee |
86 |
09060-10831 |
AC High Voltage Meter |
1 kV to 200 kV @ 50 Hz |
As specification |
Compared against AC high voltage reference system. |
Calibration Fee |
87 |
09060-10832 |
AC High Voltage Source |
1 kV to 200 kV @ 50 Hz |
? 0.4 % |
Calibration Fee |
|
88 |
09060-10833 |
Voltage Transformers |
3.3 kV to 33 kV @ 50Hz/60 Hz |
? 0.01 % ratio error |
Compared against voltage transformer reference system. 850 THB for additional point |
Calibration Fee |
89 |
09060-10840 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
100 kV |
Scale factor ? 1.1 % |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
90 |
09060-10841 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
200 kV |
Time parameter ? 1.7 % |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
91 |
09060-10842 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
300 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
92 |
09060-10843 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
400 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
93 |
09060-10844 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
500 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
94 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
100 kV |
Scale factor ? 0.77 % |
Calibration Fee |
|
95 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
200 kV |
Time parameter ? 1.7 % |
Calibration Fee |
|
96 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
300 kV |
Calibration Fee |
||
97 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
400 kV |
Calibration Fee |
||
98 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
500 kV |
Calibration Fee |
||
99 |
09060-10860 |
Current Transformers |
5 A to 1500 A @ 50 Hz/60 Hz |
? 0.01 % ratio error ,less than 0.3 min phase displacement |
Compared against current transformer reference system. 850 THB for additional point |
Calibration Fee |
100 |
09070-11020 |
DC magnetic flux density /Reference magnet |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
101 |
09070-11020 |
DC magnetic flux density /Reference magnet |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
102 |
09070-11020 |
DC magnetic flux density /Reference magnet |
20 mT < B < 30 mT |
> 0.1 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
103 |
09070-11020 |
DC magnetic flux density /Reference magnet |
30 mT < B < 2.4 T |
> 0.1 % |
Calibration Fee |
|
104 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
105 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
106 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
20 mT < B < 30 mT |
> 0.1% |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
107 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
108 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
109 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
20 mT < B < 30 mT |
> 0.1 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
110 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
30 mT < B < 2.4 T |
> 0.08 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
111 |
09090-11110 |
Power Sensor |
100 kHz to 18 GHz, 1 mW |
1.1% |
Calibration Fee |
|
112 |
09090-11111 |
Power meter |
As specification |
As specification |
Calibration Fee |
|
113 |
09100-12400 |
Standard Optical Power Meter |
1 mW to 20 mW @ 488 nm,515 nm |
> 0.5 % |
Applied direct comparison method with standard calorimeter. |
Calibration Fee |
114 |
50 mW to 20 mW @ 633 nm |
Calibration Fee |
||||
115 |
50 mW to 3 mW @ 1310 nm Band |
Calibration Fee |
||||
116 |
50 mW to 10 mW @ 1550 nm Band |
Calibration Fee |
||||
117 |
09100-12401 |
Optical Power Meter |
1 mW to 20 mW @ 488nm,515nm |
> 0.7 % |
Applied direct comparison method with standard power meter. |
Calibration Fee |
118 |
50 mW to 20 mW @ 633 nm |
Calibration Fee |
||||
119 |
50 mW to 3 mW @ 1310 nm Band |
Calibration Fee |
||||
120 |
50 mW to 10 mW @ 1550 nm Band |
Calibration Fee |
||||
121 |
09090-11114 |
Feedthrough Mount |
100 kHz to 18 GHz, 1 mW |
1.1% |
Calibration Fee |
|
122 |
RF Attenuator |
|
Calibration Fee |
|||
123 |
09090-11120 |
- Fix Attenuator |
10 MHz to 18 GHz, 10 dB to 80 dB |
As specification |
Calibration Fee |
|
124 |
09090-11121 |
- Step Attenuator |
10 MHz to 18 GHz, 10 dB to 80 dB |
As specification |
Calibration Fee |
|
125 |
09090-11122 |
RF Step Attenuator |
31.5 Hz to 100 kHz |
As Specification |
Calibration Fee |
|
126 |
09090-11140 |
EMC/RF Field Probe |
Frequency 10 MHz to 1 GHz |
0.5 dB |
Calibration Fee |
|
127 |
Field Strength 15 V/m to 60 V/m |
Calibration Fee |
||||
128 |
09090-11160 |
Oscilloscope |
As specification |
As specification |
Calibration Fee |
|
129 |
09090-11161 |
Spectrum Analyzer |
As specification |
As specification |
Calibration Fee |
|
130 |
09090-11162 |
Network Analyzer |
As specification |
As specification |
Calibration Fee |
|
131 |
09090-11163 |
Synthesizer Signal Generator |
Up to 225 MHz |
As specification |
Calibration Fee |
|
132 |
09090-11164 |
Function Generator |
As specification |
As specification |
Calibration Fee |
|
133 |
09090-11170 |
RF Signal Generator |
As specification |
As specification |
Excluded AM, FM and phase modulation. |
Calibration Fee |
134 |
09090-11171 |
Other of RF Microwave Equipment |
As specification |
As specification |
Calibration Fee |
|
135 |
09090-11172 |
RF Voltmeter |
10 MHz to 1 GHz |
As specification |
Calibration Fee |
|
136 |
09090-11173 |
RF Voltage Source |
As specification |
As specification |
Calibration Fee |
|
137 |
09090-11174 |
Directional Coupler |
100 MHz to 18 GHz |
As Specification |
Calibration Fee |
|
138 |
09110-11310 |
Calibrator |
DC Voltage : 0 V to 1 kV |
40 mV/V to 0.6 mV/V |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
139 |
09110-11310 |
Calibrator |
AC Voltage : 10 mV to 1 kV @ 10 Hz to 1 MHz |
3.03 mV/V to 20 mV/V |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
140 |
09110-11310 |
Calibrator |
AC Voltage : 30 V to 1 kV @ 10 Hz to 100 kHz |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
|
141 |
09110-11310 |
Calibrator |
DC Current : 0 A to 20 A |
150 mA/A to 4.5 mA/A |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
142 |
09110-11310 |
Calibrator |
AC Current : 100 mA to 20 A @ 10 Hz to 100 kHz |
1.1 mA/A to 65 mA/A |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
143 |
09110-11310 |
Calibrator |
Resistance : 0 W to 1 GW |
1.3 mW/W to 1.8 mW/W |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
144 |
09110-11311 |
Wideband Option |
Up to 30 MHz |
As specification |
3,000 THB/option for additional adjustment. |
Calibration Fee |
145 |
09110-11312 |
Power Option |
As specification |
As specification |
2,500 THB/option for additional adjustment. |
Calibration Fee |
146 |
09110-11313 |
Scope Option |
300 MHz |
As specification |
2,000 to 6,500 THB/option for additional adjustment. |
Calibration Fee |
147 |
09110-11314 |
Scope Option |
600 MHz to 1 GHz |
As specification |
2,000 to 6,500 THB/option for additional adjustment. |
Calibration Fee |
148 |
09110-11315 |
Oscilloscope Calibrator |
Up to 600 MHz |
As specification |
2,000 to 13,500 THB/item for additional adjustment. |
Calibration Fee |
149 |
09110-11316 |
Oscilloscope Calibrator |
Up to 2.1 GHz |
As specification |
2,000 to 13,500 THB/item for additional adjustment. |
Calibration Fee |
150 |
09110-11317 |
Amplifier / Precision Power Amplifier |
Up to 1kV 10 Hz up to 100 kHz |
As specification |
2,500 THB/function for additional adjustment. |
Calibration Fee |
151 |
09110-11320 |
Digital Multimeter |
6 1/2 digit |
As specification |
5,400 THB for additional adjustment. |
Calibration Fee |
152 |
09110-11321 |
Digital Multimeter |
7 1/2 digit |
As specification |
6,750 THB for aditional calibrate with AC/DC Shunt using direct measurement method |
Calibration Fee |
153 |
09110-11322 |
Digital Multimeter |
8 1/2 digit |
As specification |
6,750 THB for aditional calibrate with AC/DC Shunt using direct measurement method |
Calibration Fee |
154 |
09110-10120 |
Nano Voltmeter |
DC Voltage: 1 mV to 100 mV |
As specification |
2,500 THB for additional adjustment. |
Calibration Fee |
155 |
09080-10221 |
Frequency Source- Rubidium |
1 MHz, 5 MHz, |
? 1 x 10-12 |
Calibration Fee |
|
156 |
09080-10221 |
Frequency Source- Quartz, Others |
10 MHz, 1 PPS |
Calibration Fee |
||
157 |
09080-10231 |
Frequency Counter Timer Counter |
Up to 1 GHz |
1 x 10-8 to 1 x 10-6 |
Calibration Fee |
|
158 |
09080-10232 |
Frequency Meter |
10 kHz to 225 MHz |
3 x 10-13 to 5 x 10-10 |
Calibration Fee |
|
159 |
09080-10322 |
Tachometer |
As specification |
As specification |
Calibration Fee |
|
160 |
09080-10331 |
Stopwatch |
As specification |
As specification |
Calibration Fee |
|
161 |
09080-30212 |
Standard Frequency Source for Remote Frequncy Standard |
1 MHz, 5 MHz, 10 MHz |
? 1 x 10-12 |
On-site Calibration |
|
162 |
09010-10110 |
DC Voltage Standard |
1.018 V |
0.9 mV/V |
Calibration Fee |
|
163 |
09010-10110 |
DC Voltage Standard |
10 V |
0.4 mV/V |
Calibration Fee |
|
164 |
09010-10111 |
Standard Cell |
1 V / 1.018 V |
0.9 mV/V |
Calibration Fee |
|
165 |
09010-10112 |
DC Voltage Standard |
1 V / 1.018 V |
0.09 mV/V |
Compared against JJVS maintained by NIMT. |
Calibration Fee |
166 |
09010-10112 |
DC Voltage Standard |
10 V |
0.03 mV/V |
Compared against JJVS maintained by NIMT. |
Calibration Fee |
167 |
09030-10210 |
DC Standard Resistor |
1 kW |
0.14 mW/W |
Compared against QHR standard maintain by NIMT using automatic resistance bridge. |
Calibration Fee |
168 |
09030-10211 |
Standard Resistor 1 W |
1 W at 50 mA |
? 0.21 mW/W |
Used a group of 1 W standard. |
Calibration Fee |
169 |
09030-10212 |
Standard Resistor 10 kW |
10 kW at 0.3 mA |
? 1.4 mW/W |
Used a group of 10 kW standard. |
Calibration Fee |
170 |
09030-10213 |
Standard Resistor |
100 ?? at 200 A |
As Specification |
Used DCC bridge and 400 Amp range extender. |
Calibration Fee |
171 |
09030-10214 |
Standard Resistor (Calibrate in oil or in air) |
1 mW to 10 kW |
As specification |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
172 |
09030-10215 |
Standard Resistor (Calibrate in oil or in air) |
>10 kW to 1GW |
? 500 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
173 |
09030-10216 |
Standard Resistor (Calibrate in oil or in air) |
0 W to 1 TW |
As specification |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
174 |
09030-10217 |
Standard Resistor (Calibrate in oil or in air) |
10 TW at 100 V, 200 V |
3 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
175 |
09030-10217 |
Standard Resistor (Calibrate in oil or in air) |
500 V and 1000 V |
3 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
176 |
09030-10218 |
Decade Resistance Box |
1 mW to 10 MW |
As specification |
Calibration Fee |
|
177 |
09030-10219 |
Decade Resistance Box |
10 MW to 1 TW |
As specification |
Calibration Fee |
|
178 |
09031-10210 |
Resistance Calibrator |
0 W to 100 MW |
As specification |
Calibration Fee |
|
179 |
09030-10220 |
High Resistance Meter |
Up to 1 TW |
As specification |
Calibration Fee |
|
180 |
09030-10221 |
Digital Thermometer (indicator) |
up to 10 MW |
? 5 mW/W |
Calibration Fee |
|
181 |
09030-10222 |
|
? 5 mW/W |
Calibration Fee |
||
182 |
09010-10320 |
Picoampmeter |
2 pA to 200 mA |
5 mV/V to 0.1 mV/V |
Used volt-ampere method. |
Calibration Fee |
183 |
09010-10321 |
Electrometer |
2 nC to 200 ?C |
0.1 mV/V |
Calibration Fee |
|
184 |
09040-10410 |
AC Resistance |
1 W, 25 W, 100 W, 400 W at 60 Hz or 75 Hz |
As Specification |
Calibration Fee |
|
185 |
09040-10411 |
AC Resistor |
1 W to 100 kW @ 1000 Hz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
186 |
09040-10412 |
Additional Measurement at another Frequency |
1 W to 100 kW @ 100 Hz to 100 kHz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
187 |
09040-10413 |
Decade AC Resistor |
1 W to 100 kW @ 1000 Hz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
188 |
09040-10414 |
Additional Measurement at another Frequency |
1 W to 100 kW @ 100 Hz to 100 kHz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
189 |
09040-10420 |
Fixed, Fused Silica Dielectric Standard Capacitors |
10 pF @ 1000 Hz |
0.087 mF/F |
Comparing with a group of 10 pF standards |
Calibration Fee |
190 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
1 pF @ 1000 Hz |
0.71 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
191 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
10 pF @ 1000 Hz |
0.70 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
192 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
100 pF@ 1000 Hz |
0.70 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
193 |
09040-10422 |
Fixed Three Terminal, Nitrogen Dielectric Standard Capacitors |
10 pF 100 pF @ 1000 Hz and 1592 Hz |
1.2 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
194 |
09040-10422 |
Fixed Three Terminal, Nitrogen Dielectric Standard Capacitors |
1000 pF @ 1000 Hz and 1592 Hz |
3.5 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
195 |
09040-10423 |
Two or Three Terminal Mica Dielectric Standard Capacitors |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 1000 Hz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
196 |
09040-10424 |
Additional Measurement at another Frequency |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 100, 120, 200, 400, 500 Hz, 2 kHz, 5 kHz, 10 kHz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
197 |
09040-10425 |
Four-Terminal Pair Capacitance Standard |
1 pF, 10 pF, 100 pF, 1000 pF, 0.01 mF, 0.1 mF and 1 mF @ 1000 Hz |
> 0.12 mF/F |
Measured by precision capacitance bridge, direct measurement, at desired frequency. |
Calibration Fee |
198 |
09040-10426 |
Additional Measurement at another Frequency |
1 pF, 10 pF, 100 pF, 1000 pF, 0.01 mF, 0.1 mF and 1 mF @ 100 Hz to 100 kHz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
199 |
09040-10427 |
Fixed Standard Capacitors |
1 pF to 1 F @ 1000 Hz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
200 |
09040-10428 |
Additional Measurement at another Frequency |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
201 |
09040-10429 |
Decade capacitor |
1 pF to 10 mF @ 1000 Hz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
202 |
09041-10420 |
Decade capacitor |
1 pF to 1 F @ 1000 Hz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
203 |
09041-10421 |
Additional Measurement at another |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
204 |
09041-10422 |
Frequency |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
205 |
09041-10423 |
Precision Capacitance Bridge |
1 pF, 10 pF, 100 pF and 1000 pF @ 1000 Hz or 1592 Hz |
? 1 mF/F |
Calibrated by comparing its reading against the reference standard capacitors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement. |
Calibration Fee |
206 |
09040-10430 |
Fixed Standard Inductors |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 1000 Hz |
> 0.16 mH/H |
Measured by the direct substitution method with the reference standard inductors. |
Calibration Fee |
207 |
09040-10431 |
Additional Measurement at another Frequency |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 12 Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
208 |
09040-10432 |
Fixed standard Inductor |
1 mH to 10 H @ 1 kHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
209 |
09040-10433 |
Additional Measurement at another Frequency |
1 mH to 10 H @ 12 Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
210 |
09040-10434 |
Decade Inductors |
1 mH to 10 H @ 1000 Hz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
211 |
09040-10435 |
Additional Measurement at another Frequency |
1 mH to 10 H @ 12Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
212 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 100, 120, 200, 400, 500 Hz, 1 kHz, 2 kHz, 5 kHz, 10 kHz |
> 0.12 mF/F |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
213 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
1 pF, 10 pF, 100 pF, 1000 pF @ 1000 Hz* |
> 0.12 mF/F |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
214 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 1000 Hz |
> 0.16 mH/H |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
215 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
1 W, 10 W, 100 W, 1000 W @ 1 kHz |
> 0.20 mW/W |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
216 |
09020-10510 |
AC/DC Transfer Standard |
AC-DC Transfer Difference 2 mV to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
217 |
09020-10511 |
Thermal Transfer Standard |
AC-DC Transfer Difference 0.5 V to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
218 |
09020-10512 |
Thermal Voltage Converter Standard |
AC-DC Transfer Difference 0.5 V to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
219 |
09020-10520 |
AC Measurement Standard |
AC-DC Transfer Difference 10 mV to 20 V Frequency: 10 Hz to 1 MHz |
As specification |
Excluded WB option. |
Calibration Fee |
220 |
09020-10521 |
AC Measurement Standard |
AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
As specification |
Included WB option. |
Calibration Fee |
221 |
09020-10522 |
Alternating Voltage Measurement Standard |
AC Voltage Deviation 100 mV to 20 V Frequency: 10 Hz to 1 MHz |
14 mV/V to 0.35 mV/V |
Calibration Fee |
|
222 |
09020-10522 |
Alternating Voltage Measurement Standard |
AC Voltage Deviation > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
15 mV/V to 0.12 mV/V |
Calibration Fee |
|
223 |
09020-10560 |
AC Voltage Current Standard |
AC Voltage 100 mV to 1000V Frequency 60 Hz and 400 Hz |
55 mV/V to 6 mV/V |
Applied direct measurement method by AC measurement standard. |
Calibration Fee |
224 |
09020-10560 |
AC Voltage Current Standard |
AC Current 100 mA to 30 A Frequency 60 Hz and 400 Hz |
0.1 mA/A to 0.2 mA/A |
Applied direct measurement method by AC measurement standard. |
Calibration Fee |
225 |
09020-10561 |
Multifunction Transfer Standard |
As specification |
As specification |
Calibration Fee |
|
226 |
09020-10610 |
AC/DC Current Shunt |
AC-DC Transfer Difference 5 mA to 30 A Frequency: 10 Hz to 100 kHz |
As specification |
Calibration Fee |
|
227 |
09050-10710 |
Standard Watt Converter |
Volt : 600 V Current : 100 A AC Power : 60 kW Frequency : 50 Hz, 60 Hz Power Factor : + 0 to 1 |
> 55 mW/VA |
Calibration Fee |
|
228 |
09050-10711 |
AC Wattmeter, Digital Power Meter |
Volt : 1000 V Current : 80 A AC Power : 80 kW Frequency : 15 Hz to 450 Hz Power Factor : + 0 to 1 |
> 100 mW/VA |
Calibration Fee |
|
229 |
09050-10712 |
Energy Meter |
Eneregy 1.5 Ws to 3600 kWs Voltage 15 V to 600 V Current 0.1 A to 100 A Power Factor 1 to 0 (Inductive or Capacitive) Frequency 50 Hz to 60 Hz Measurement time 1s to 60 s |
? 100 mWh/ VAh |
Applied the known voltage,current and power from the AC power calibration system and measure pulse output against the time standard. |
Calibration Fee |
230 |
09050-10713 |
Electrical Power Source |
Power 1.5 W to 60 kW Frequency 50 Hz to 60 Hz Power Factor 1 to 0 (Inductive or Capacitive) |
Power ? 70 mW/VA |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
231 |
09050-10713 |
Electrical Power Source |
Voltage 3 V to 1000 V |
Voltage ? 30 mV/V |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
232 |
09050-10713 |
Electrical Power Source |
Current 0.05 A to 100 A |
Current ? 30 mA/A |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
233 |
09050-10713 |
Electrical Power Source |
Frequency 15 Hz to 6 kHz |
phase ? 0.005o |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
234 |
09050-10714 |
DC Power Meter |
Power: 1mW to 20 kW Voltage : 100 mV to 1000 V Current : 10 mA to 20 A |
? 40 mW/ W |
Applied the comparision method. |
Calibration Fee |
235 |
09050-10715 |
Energy Source |
Eneregy 41.67 mWh to 3.333 kWh Power: 0.5 W to 20 kW Voltage: 10 V to 1000 V Current: 0.05 A to 20 A Power Factor: 1 Time : 5 minute to 10 minute Frequency: 50 Hz to 60 Hz |
> 0.12 % |
Calibration Fee |
|
236 |
09050-10920 |
Phase Meter |
Phase Angle : 0.000o to + 360.000o Frequency : 15 Hz to 100 kHz Amplitde : 50 mVrms to 120 Vrms |
> 0.01o |
Calibration Fee |
|
237 |
09050-10921 |
Phase Source |
0.000o to 999.999o 50 mV to 120 Vrms 10 Hz to 100 kHz |
> 0.005 o |
Calibration Fee |
|
238 |
09050-10930 |
Power Analyzer, Harmonics and Flicker |
Output Voltage : 1020 V Output Current : 80 A Frequency : 20 Hz and up to 1 kHz Harmonics : 100th, up to 6 kHz Flicker : 16 Hz to 9 kHz |
Voltage > 100 mV/V Current > 150 mA/A Power > 200 mW/VA Frequency > 50 mHz/Hz |
Calibration Fee |
|
239 |
09050-10931 |
Power Ananlyzer, Dips/ Swells |
Voltage: 10 V to 1000 V Current Current : 0.05 A to 20A Dip/Swell amlitude : 10 % to 140 % of nominal amplitude Time : 1 ms to 1 minute Frequency : 16 Hz to 850 Hz |
? 0.07 % |
Calibration Fee |
|
240 |
09060-10810 |
DC High Voltage Divider |
-10 kV to 10 kV |
30 x 10-6 (Division Ratio) |
Compared against DC high voltage reference system. |
Calibration Fee |
241 |
09060-10811 |
DC High Voltage Divider |
>10 kV to 100 kV |
30 x 10-6 (Division Ratio) |
Compared against DC high voltage reference system. |
Calibration Fee |
242 |
09060-10812 |
DC High Voltage Source |
-10 kV to 100 kV |
30 mV/V |
Compared against DC high voltage reference system. |
Calibration Fee |
243 |
09060-10813 |
DC High Voltage Meter |
-10 kV to 100 kV |
As specification |
Compared against DC high voltage reference system. |
Calibration Fee |
244 |
09060-10820 |
High Voltage Capacitance & Dissipation Factor |
Capacitance 10 pF to 1000 pF Voltage:10 kV to 100 kV Frequency : 50 Hz Dissipation: 50 x 10-6 to 1 x 10-3 |
? 80 mF/F for Capacitance ? 50 x 10-6 for dissipation factor |
Compared against standard capacitor using AC high voltage capacitance and inductance bridge. |
Calibration Fee |
245 |
09060-10821 |
High Voltage Capacitance & Dissipation Factor |
Capacitance 10 pF to 1000 pF Voltage:10 kV to 200 kV Frequency : 50 Hz Dissipation: 50 x 10-6 to 1 x 10-3 |
Compared against standard capacitor using AC high voltage capacitance and inductance bridge. |
Calibration Fee |
|
246 |
09060-10830 |
AC High Voltage Divider |
1 kV to 200 kV @ 50 Hz |
? 0.4 % (Scale Factor) |
Compared against AC high voltage reference system. |
Calibration Fee |
247 |
09060-10831 |
AC High Voltage Meter |
1 kV to 200 kV @ 50 Hz |
As specification |
Compared against AC high voltage reference system. |
Calibration Fee |
248 |
09060-10832 |
AC High Voltage Source |
1 kV to 200 kV @ 50 Hz |
? 0.4 % |
Calibration Fee |
|
249 |
09060-10833 |
Voltage Transformers |
3.3 kV to 33 kV @ 50Hz/60 Hz |
? 0.01 % ratio error |
Compared against voltage transformer reference system. 850 THB for additional point |
Calibration Fee |
250 |
09060-10840 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
100 kV |
Scale factor ? 1.1 % |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
251 |
09060-10841 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
200 kV |
Time parameter ? 1.7 % |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
252 |
09060-10842 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
300 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
253 |
09060-10843 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
400 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
254 |
09060-10844 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
500 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
255 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
100 kV |
Scale factor ? 0.77 % |
Calibration Fee |
|
256 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
200 kV |
Time parameter ? 1.7 % |
Calibration Fee |
|
257 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
300 kV |
Calibration Fee |
||
258 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
400 kV |
Calibration Fee |
||
259 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
500 kV |
Calibration Fee |
||
260 |
09060-10860 |
Current Transformers |
5 A to 1500 A @ 50 Hz/60 Hz |
? 0.01 % ratio error ,less than 0.3 min phase displacement |
Compared against current transformer reference system. 850 THB for additional point |
Calibration Fee |
261 |
09070-11020 |
DC magnetic flux density /Reference magnet |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
262 |
09070-11020 |
DC magnetic flux density /Reference magnet |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
263 |
09070-11020 |
DC magnetic flux density /Reference magnet |
20 mT < B < 30 mT |
> 0.1 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
264 |
09070-11020 |
DC magnetic flux density /Reference magnet |
30 mT < B < 2.4 T |
> 0.1 % |
Calibration Fee |
|
265 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
266 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
267 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
20 mT < B < 30 mT |
> 0.1% |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
268 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
269 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
270 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
20 mT < B < 30 mT |
> 0.1 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
271 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
30 mT < B < 2.4 T |
> 0.08 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
272 |
09090-11110 |
Power Sensor |
100 kHz to 18 GHz, 1 mW |
1.1% |
Calibration Fee |
|
273 |
09090-11111 |
Power meter |
As specification |
As specification |
Calibration Fee |
|
274 |
09100-12400 |
Standard Optical Power Meter |
1 mW to 20 mW @ 488 nm,515 nm |
> 0.5 % |
Applied direct comparison method with standard calorimeter. |
Calibration Fee |
275 |
50 mW to 20 mW @ 633 nm |
Calibration Fee |
||||
276 |
50 mW to 3 mW @ 1310 nm Band |
Calibration Fee |
||||
277 |
50 mW to 10 mW @ 1550 nm Band |
Calibration Fee |
||||
278 |
09100-12401 |
Optical Power Meter |
1 mW to 20 mW @ 488nm,515nm |
> 0.7 % |
Applied direct comparison method with standard power meter. |
Calibration Fee |
279 |
50 mW to 20 mW @ 633 nm |
Calibration Fee |
||||
280 |
50 mW to 3 mW @ 1310 nm Band |
Calibration Fee |
||||
281 |
50 mW to 10 mW @ 1550 nm Band |
Calibration Fee |
||||
282 |
09090-11114 |
Feedthrough Mount |
100 kHz to 18 GHz, 1 mW |
1.1% |
Calibration Fee |
|
283 |
RF Attenuator |
|
Calibration Fee |
|||
284 |
09090-11120 |
- Fix Attenuator |
10 MHz to 18 GHz, 10 dB to 80 dB |
As specification |
Calibration Fee |
|
285 |
09090-11121 |
- Step Attenuator |
10 MHz to 18 GHz, 10 dB to 80 dB |
As specification |
Calibration Fee |
|
286 |
09090-11122 |
RF Step Attenuator |
31.5 Hz to 100 kHz |
As Specification |
Calibration Fee |
|
287 |
09090-11140 |
EMC/RF Field Probe |
Frequency 10 MHz to 1 GHz |
0.5 dB |
Calibration Fee |
|
288 |
Field Strength 15 V/m to 60 V/m |
Calibration Fee |
||||
289 |
09090-11160 |
Oscilloscope |
As specification |
As specification |
Calibration Fee |
|
290 |
09090-11161 |
Spectrum Analyzer |
As specification |
As specification |
Calibration Fee |
|
291 |
09090-11162 |
Network Analyzer |
As specification |
As specification |
Calibration Fee |
|
292 |
09090-11163 |
Synthesizer Signal Generator |
Up to 225 MHz |
As specification |
Calibration Fee |
|
293 |
09090-11164 |
Function Generator |
As specification |
As specification |
Calibration Fee |
|
294 |
09090-11170 |
RF Signal Generator |
As specification |
As specification |
Excluded AM, FM and phase modulation. |
Calibration Fee |
295 |
09090-11171 |
Other of RF Microwave Equipment |
As specification |
As specification |
Calibration Fee |
|
296 |
09090-11172 |
RF Voltmeter |
10 MHz to 1 GHz |
As specification |
Calibration Fee |
|
297 |
09090-11173 |
RF Voltage Source |
As specification |
As specification |
Calibration Fee |
|
298 |
09090-11174 |
Directional Coupler |
100 MHz to 18 GHz |
As Specification |
Calibration Fee |
|
299 |
09110-11310 |
Calibrator |
DC Voltage : 0 V to 1 kV |
40 mV/V to 0.6 mV/V |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
300 |
09110-11310 |
Calibrator |
AC Voltage : 10 mV to 1 kV @ 10 Hz to 1 MHz |
3.03 mV/V to 20 mV/V |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
301 |
09110-11310 |
Calibrator |
AC Voltage : 30 V to 1 kV @ 10 Hz to 100 kHz |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
|
302 |
09110-11310 |
Calibrator |
DC Current : 0 A to 20 A |
150 mA/A to 4.5 mA/A |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
303 |
09110-11310 |
Calibrator |
AC Current : 100 mA to 20 A @ 10 Hz to 100 kHz |
1.1 mA/A to 65 mA/A |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
304 |
09110-11310 |
Calibrator |
Resistance : 0 W to 1 GW |
1.3 mW/W to 1.8 mW/W |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
305 |
09110-11311 |
Wideband Option |
Up to 30 MHz |
As specification |
3,000 THB/option for additional adjustment. |
Calibration Fee |
306 |
09110-11312 |
Power Option |
As specification |
As specification |
2,500 THB/option for additional adjustment. |
Calibration Fee |
307 |
09110-11313 |
Scope Option |
300 MHz |
As specification |
2,000 to 6,500 THB/option for additional adjustment. |
Calibration Fee |
308 |
09110-11314 |
Scope Option |
600 MHz to 1 GHz |
As specification |
2,000 to 6,500 THB/option for additional adjustment. |
Calibration Fee |
309 |
09110-11315 |
Oscilloscope Calibrator |
Up to 600 MHz |
As specification |
2,000 to 13,500 THB/item for additional adjustment. |
Calibration Fee |
310 |
09110-11316 |
Oscilloscope Calibrator |
Up to 2.1 GHz |
As specification |
2,000 to 13,500 THB/item for additional adjustment. |
Calibration Fee |
311 |
09110-11317 |
Amplifier / Precision Power Amplifier |
Up to 1kV 10 Hz up to 100 kHz |
As specification |
2,500 THB/function for additional adjustment. |
Calibration Fee |
312 |
09110-11320 |
Digital Multimeter |
6 1/2 digit |
As specification |
5,400 THB for additional adjustment. |
Calibration Fee |
313 |
09110-11321 |
Digital Multimeter |
7 1/2 digit |
As specification |
6,750 THB for aditional calibrate with AC/DC Shunt using direct measurement method |
Calibration Fee |
314 |
09110-11322 |
Digital Multimeter |
8 1/2 digit |
As specification |
6,750 THB for aditional calibrate with AC/DC Shunt using direct measurement method |
Calibration Fee |
315 |
09110-10120 |
Nano Voltmeter |
DC Voltage: 1 mV to 100 mV |
As specification |
2,500 THB for additional adjustment. |
Calibration Fee |
316 |
09080-10221 |
Frequency Source- Rubidium |
1 MHz, 5 MHz, |
? 1 x 10-12 |
Calibration Fee |
|
317 |
09080-10221 |
Frequency Source- Quartz, Others |
10 MHz, 1 PPS |
Calibration Fee |
||
318 |
09080-10231 |
Frequency Counter Timer Counter |
Up to 1 GHz |
1 x 10-8 to 1 x 10-6 |
Calibration Fee |
|
319 |
09080-10232 |
Frequency Meter |
10 kHz to 225 MHz |
3 x 10-13 to 5 x 10-10 |
Calibration Fee |
|
320 |
09080-10322 |
Tachometer |
As specification |
As specification |
Calibration Fee |
|
321 |
09080-10331 |
Stopwatch |
As specification |
As specification |
Calibration Fee |
|
322 |
09080-30212 |
Standard Frequency Source for Remote Frequncy Standard |
1 MHz, 5 MHz, 10 MHz |
? 1 x 10-12 |
On-site Calibration |
|
323 |
09010-10110 |
DC Voltage Standard |
1.018 V |
0.9 mV/V |
Calibration Fee |
|
324 |
09010-10110 |
DC Voltage Standard |
10 V |
0.4 mV/V |
Calibration Fee |
|
325 |
09010-10111 |
Standard Cell |
1 V / 1.018 V |
0.9 mV/V |
Calibration Fee |
|
326 |
09010-10112 |
DC Voltage Standard |
1 V / 1.018 V |
0.09 mV/V |
Compared against JJVS maintained by NIMT. |
Calibration Fee |
327 |
09010-10112 |
DC Voltage Standard |
10 V |
0.03 mV/V |
Compared against JJVS maintained by NIMT. |
Calibration Fee |
328 |
09030-10210 |
DC Standard Resistor |
1 kW |
0.14 mW/W |
Compared against QHR standard maintain by NIMT using automatic resistance bridge. |
Calibration Fee |
329 |
09030-10211 |
Standard Resistor 1 W |
1 W at 50 mA |
? 0.21 mW/W |
Used a group of 1 W standard. |
Calibration Fee |
330 |
09030-10212 |
Standard Resistor 10 kW |
10 kW at 0.3 mA |
? 1.4 mW/W |
Used a group of 10 kW standard. |
Calibration Fee |
331 |
09030-10213 |
Standard Resistor |
100 ?? at 200 A |
As Specification |
Used DCC bridge and 400 Amp range extender. |
Calibration Fee |
332 |
09030-10214 |
Standard Resistor (Calibrate in oil or in air) |
1 mW to 10 kW |
As specification |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
333 |
09030-10215 |
Standard Resistor (Calibrate in oil or in air) |
>10 kW to 1GW |
? 500 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
334 |
09030-10216 |
Standard Resistor (Calibrate in oil or in air) |
0 W to 1 TW |
As specification |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
335 |
09030-10217 |
Standard Resistor (Calibrate in oil or in air) |
10 TW at 100 V, 200 V |
3 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
336 |
09030-10217 |
Standard Resistor (Calibrate in oil or in air) |
500 V and 1000 V |
3 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
337 |
09030-10218 |
Decade Resistance Box |
1 mW to 10 MW |
As specification |
Calibration Fee |
|
338 |
09030-10219 |
Decade Resistance Box |
10 MW to 1 TW |
As specification |
Calibration Fee |
|
339 |
09031-10210 |
Resistance Calibrator |
0 W to 100 MW |
As specification |
Calibration Fee |
|
340 |
09030-10220 |
High Resistance Meter |
Up to 1 TW |
As specification |
Calibration Fee |
|
341 |
09030-10221 |
Digital Thermometer (indicator) |
up to 10 MW |
? 5 mW/W |
Calibration Fee |
|
342 |
09030-10222 |
|
? 5 mW/W |
Calibration Fee |
||
343 |
09010-10320 |
Picoampmeter |
2 pA to 200 mA |
5 mV/V to 0.1 mV/V |
Used volt-ampere method. |
Calibration Fee |
344 |
09010-10321 |
Electrometer |
2 nC to 200 ?C |
0.1 mV/V |
Calibration Fee |
|
345 |
09040-10410 |
AC Resistance |
1 W, 25 W, 100 W, 400 W at 60 Hz or 75 Hz |
As Specification |
Calibration Fee |
|
346 |
09040-10411 |
AC Resistor |
1 W to 100 kW @ 1000 Hz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
347 |
09040-10412 |
Additional Measurement at another Frequency |
1 W to 100 kW @ 100 Hz to 100 kHz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
348 |
09040-10413 |
Decade AC Resistor |
1 W to 100 kW @ 1000 Hz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
349 |
09040-10414 |
Additional Measurement at another Frequency |
1 W to 100 kW @ 100 Hz to 100 kHz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
350 |
09040-10420 |
Fixed, Fused Silica Dielectric Standard Capacitors |
10 pF @ 1000 Hz |
0.087 mF/F |
Comparing with a group of 10 pF standards |
Calibration Fee |
351 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
1 pF @ 1000 Hz |
0.71 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
352 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
10 pF @ 1000 Hz |
0.70 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
353 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
100 pF@ 1000 Hz |
0.70 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
354 |
09040-10422 |
Fixed Three Terminal, Nitrogen Dielectric Standard Capacitors |
10 pF 100 pF @ 1000 Hz and 1592 Hz |
1.2 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
355 |
09040-10422 |
Fixed Three Terminal, Nitrogen Dielectric Standard Capacitors |
1000 pF @ 1000 Hz and 1592 Hz |
3.5 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
356 |
09040-10423 |
Two or Three Terminal Mica Dielectric Standard Capacitors |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 1000 Hz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
357 |
09040-10424 |
Additional Measurement at another Frequency |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 100, 120, 200, 400, 500 Hz, 2 kHz, 5 kHz, 10 kHz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
358 |
09040-10425 |
Four-Terminal Pair Capacitance Standard |
1 pF, 10 pF, 100 pF, 1000 pF, 0.01 mF, 0.1 mF and 1 mF @ 1000 Hz |
> 0.12 mF/F |
Measured by precision capacitance bridge, direct measurement, at desired frequency. |
Calibration Fee |
359 |
09040-10426 |
Additional Measurement at another Frequency |
1 pF, 10 pF, 100 pF, 1000 pF, 0.01 mF, 0.1 mF and 1 mF @ 100 Hz to 100 kHz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
360 |
09040-10427 |
Fixed Standard Capacitors |
1 pF to 1 F @ 1000 Hz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
361 |
09040-10428 |
Additional Measurement at another Frequency |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
362 |
09040-10429 |
Decade capacitor |
1 pF to 10 mF @ 1000 Hz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
363 |
09041-10420 |
Decade capacitor |
1 pF to 1 F @ 1000 Hz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
364 |
09041-10421 |
Additional Measurement at another |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
365 |
09041-10422 |
Frequency |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
366 |
09041-10423 |
Precision Capacitance Bridge |
1 pF, 10 pF, 100 pF and 1000 pF @ 1000 Hz or 1592 Hz |
? 1 mF/F |
Calibrated by comparing its reading against the reference standard capacitors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement. |
Calibration Fee |
367 |
09040-10430 |
Fixed Standard Inductors |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 1000 Hz |
> 0.16 mH/H |
Measured by the direct substitution method with the reference standard inductors. |
Calibration Fee |
368 |
09040-10431 |
Additional Measurement at another Frequency |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 12 Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
369 |
09040-10432 |
Fixed standard Inductor |
1 mH to 10 H @ 1 kHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
370 |
09040-10433 |
Additional Measurement at another Frequency |
1 mH to 10 H @ 12 Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
371 |
09040-10434 |
Decade Inductors |
1 mH to 10 H @ 1000 Hz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
372 |
09040-10435 |
Additional Measurement at another Frequency |
1 mH to 10 H @ 12Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
373 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 100, 120, 200, 400, 500 Hz, 1 kHz, 2 kHz, 5 kHz, 10 kHz |
> 0.12 mF/F |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
374 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
1 pF, 10 pF, 100 pF, 1000 pF @ 1000 Hz* |
> 0.12 mF/F |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
375 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 1000 Hz |
> 0.16 mH/H |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
376 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
1 W, 10 W, 100 W, 1000 W @ 1 kHz |
> 0.20 mW/W |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
377 |
09020-10510 |
AC/DC Transfer Standard |
AC-DC Transfer Difference 2 mV to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
378 |
09020-10511 |
Thermal Transfer Standard |
AC-DC Transfer Difference 0.5 V to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
379 |
09020-10512 |
Thermal Voltage Converter Standard |
AC-DC Transfer Difference 0.5 V to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
380 |
09020-10520 |
AC Measurement Standard |
AC-DC Transfer Difference 10 mV to 20 V Frequency: 10 Hz to 1 MHz |
As specification |
Excluded WB option. |
Calibration Fee |
381 |
09020-10521 |
AC Measurement Standard |
AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
As specification |
Included WB option. |
Calibration Fee |
382 |
09020-10522 |
Alternating Voltage Measurement Standard |
AC Voltage Deviation 100 mV to 20 V Frequency: 10 Hz to 1 MHz |
14 mV/V to 0.35 mV/V |
Calibration Fee |
|
383 |
09020-10522 |
Alternating Voltage Measurement Standard |
AC Voltage Deviation > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
15 mV/V to 0.12 mV/V |
Calibration Fee |
|
384 |
09020-10560 |
AC Voltage Current Standard |
AC Voltage 100 mV to 1000V Frequency 60 Hz and 400 Hz |
55 mV/V to 6 mV/V |
Applied direct measurement method by AC measurement standard. |
Calibration Fee |
385 |
09020-10560 |
AC Voltage Current Standard |
AC Current 100 mA to 30 A Frequency 60 Hz and 400 Hz |
0.1 mA/A to 0.2 mA/A |
Applied direct measurement method by AC measurement standard. |
Calibration Fee |
386 |
09020-10561 |
Multifunction Transfer Standard |
As specification |
As specification |
Calibration Fee |
|
387 |
09020-10610 |
AC/DC Current Shunt |
AC-DC Transfer Difference 5 mA to 30 A Frequency: 10 Hz to 100 kHz |
As specification |
Calibration Fee |
|
388 |
09050-10710 |
Standard Watt Converter |
Volt : 600 V Current : 100 A AC Power : 60 kW Frequency : 50 Hz, 60 Hz Power Factor : + 0 to 1 |
> 55 mW/VA |
Calibration Fee |
|
389 |
09050-10711 |
AC Wattmeter, Digital Power Meter |
Volt : 1000 V Current : 80 A AC Power : 80 kW Frequency : 15 Hz to 450 Hz Power Factor : + 0 to 1 |
> 100 mW/VA |
Calibration Fee |
|
390 |
09050-10712 |
Energy Meter |
Eneregy 1.5 Ws to 3600 kWs Voltage 15 V to 600 V Current 0.1 A to 100 A Power Factor 1 to 0 (Inductive or Capacitive) Frequency 50 Hz to 60 Hz Measurement time 1s to 60 s |
? 100 mWh/ VAh |
Applied the known voltage,current and power from the AC power calibration system and measure pulse output against the time standard. |
Calibration Fee |
391 |
09050-10713 |
Electrical Power Source |
Power 1.5 W to 60 kW Frequency 50 Hz to 60 Hz Power Factor 1 to 0 (Inductive or Capacitive) |
Power ? 70 mW/VA |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
392 |
09050-10713 |
Electrical Power Source |
Voltage 3 V to 1000 V |
Voltage ? 30 mV/V |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
393 |
09050-10713 |
Electrical Power Source |
Current 0.05 A to 100 A |
Current ? 30 mA/A |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
394 |
09050-10713 |
Electrical Power Source |
Frequency 15 Hz to 6 kHz |
phase ? 0.005o |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
395 |
09050-10714 |
DC Power Meter |
Power: 1mW to 20 kW Voltage : 100 mV to 1000 V Current : 10 mA to 20 A |
? 40 mW/ W |
Applied the comparision method. |
Calibration Fee |
396 |
09050-10715 |
Energy Source |
Eneregy 41.67 mWh to 3.333 kWh Power: 0.5 W to 20 kW Voltage: 10 V to 1000 V Current: 0.05 A to 20 A Power Factor: 1 Time : 5 minute to 10 minute Frequency: 50 Hz to 60 Hz |
> 0.12 % |
Calibration Fee |
|
397 |
09050-10920 |
Phase Meter |
Phase Angle : 0.000o to + 360.000o Frequency : 15 Hz to 100 kHz Amplitde : 50 mVrms to 120 Vrms |
> 0.01o |
Calibration Fee |
|
398 |
09050-10921 |
Phase Source |
0.000o to 999.999o 50 mV to 120 Vrms 10 Hz to 100 kHz |
> 0.005 o |
Calibration Fee |
|
399 |
09050-10930 |
Power Analyzer, Harmonics and Flicker |
Output Voltage : 1020 V Output Current : 80 A Frequency : 20 Hz and up to 1 kHz Harmonics : 100th, up to 6 kHz Flicker : 16 Hz to 9 kHz |
Voltage > 100 mV/V Current > 150 mA/A Power > 200 mW/VA Frequency > 50 mHz/Hz |
Calibration Fee |
|
400 |
09050-10931 |
Power Ananlyzer, Dips/ Swells |
Voltage: 10 V to 1000 V Current Current : 0.05 A to 20A Dip/Swell amlitude : 10 % to 140 % of nominal amplitude Time : 1 ms to 1 minute Frequency : 16 Hz to 850 Hz |
? 0.07 % |
Calibration Fee |
|
401 |
09060-10810 |
DC High Voltage Divider |
-10 kV to 10 kV |
30 x 10-6 (Division Ratio) |
Compared against DC high voltage reference system. |
Calibration Fee |
402 |
09060-10811 |
DC High Voltage Divider |
>10 kV to 100 kV |
30 x 10-6 (Division Ratio) |
Compared against DC high voltage reference system. |
Calibration Fee |
403 |
09060-10812 |
DC High Voltage Source |
-10 kV to 100 kV |
30 mV/V |
Compared against DC high voltage reference system. |
Calibration Fee |
404 |
09060-10813 |
DC High Voltage Meter |
-10 kV to 100 kV |
As specification |
Compared against DC high voltage reference system. |
Calibration Fee |
405 |
09060-10820 |
High Voltage Capacitance & Dissipation Factor |
Capacitance 10 pF to 1000 pF Voltage:10 kV to 100 kV Frequency : 50 Hz Dissipation: 50 x 10-6 to 1 x 10-3 |
? 80 mF/F for Capacitance ? 50 x 10-6 for dissipation factor |
Compared against standard capacitor using AC high voltage capacitance and inductance bridge. |
Calibration Fee |
406 |
09060-10821 |
High Voltage Capacitance & Dissipation Factor |
Capacitance 10 pF to 1000 pF Voltage:10 kV to 200 kV Frequency : 50 Hz Dissipation: 50 x 10-6 to 1 x 10-3 |
Compared against standard capacitor using AC high voltage capacitance and inductance bridge. |
Calibration Fee |
|
407 |
09060-10830 |
AC High Voltage Divider |
1 kV to 200 kV @ 50 Hz |
? 0.4 % (Scale Factor) |
Compared against AC high voltage reference system. |
Calibration Fee |
408 |
09060-10831 |
AC High Voltage Meter |
1 kV to 200 kV @ 50 Hz |
As specification |
Compared against AC high voltage reference system. |
Calibration Fee |
409 |
09060-10832 |
AC High Voltage Source |
1 kV to 200 kV @ 50 Hz |
? 0.4 % |
Calibration Fee |
|
410 |
09060-10833 |
Voltage Transformers |
3.3 kV to 33 kV @ 50Hz/60 Hz |
? 0.01 % ratio error |
Compared against voltage transformer reference system. 850 THB for additional point |
Calibration Fee |
411 |
09060-10840 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
100 kV |
Scale factor ? 1.1 % |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
412 |
09060-10841 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
200 kV |
Time parameter ? 1.7 % |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
413 |
09060-10842 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
300 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
414 |
09060-10843 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
400 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
415 |
09060-10844 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
500 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
416 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
100 kV |
Scale factor ? 0.77 % |
Calibration Fee |
|
417 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
200 kV |
Time parameter ? 1.7 % |
Calibration Fee |
|
418 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
300 kV |
Calibration Fee |
||
419 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
400 kV |
Calibration Fee |
||
420 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
500 kV |
Calibration Fee |
||
421 |
09060-10860 |
Current Transformers |
5 A to 1500 A @ 50 Hz/60 Hz |
? 0.01 % ratio error ,less than 0.3 min phase displacement |
Compared against current transformer reference system. 850 THB for additional point |
Calibration Fee |
422 |
09070-11020 |
DC magnetic flux density /Reference magnet |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
423 |
09070-11020 |
DC magnetic flux density /Reference magnet |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
424 |
09070-11020 |
DC magnetic flux density /Reference magnet |
20 mT < B < 30 mT |
> 0.1 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
425 |
09070-11020 |
DC magnetic flux density /Reference magnet |
30 mT < B < 2.4 T |
> 0.1 % |
Calibration Fee |
|
426 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
427 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
428 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
20 mT < B < 30 mT |
> 0.1% |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
429 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
430 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
431 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
20 mT < B < 30 mT |
> 0.1 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
432 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
30 mT < B < 2.4 T |
> 0.08 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
433 |
09090-11110 |
Power Sensor |
100 kHz to 18 GHz, 1 mW |
1.1% |
Calibration Fee |
|
434 |
09090-11111 |
Power meter |
As specification |
As specification |
Calibration Fee |
|
435 |
09100-12400 |
Standard Optical Power Meter |
1 mW to 20 mW @ 488 nm,515 nm |
> 0.5 % |
Applied direct comparison method with standard calorimeter. |
Calibration Fee |
436 |
50 mW to 20 mW @ 633 nm |
Calibration Fee |
||||
437 |
50 mW to 3 mW @ 1310 nm Band |
Calibration Fee |
||||
438 |
50 mW to 10 mW @ 1550 nm Band |
Calibration Fee |
||||
439 |
09100-12401 |
Optical Power Meter |
1 mW to 20 mW @ 488nm,515nm |
> 0.7 % |
Applied direct comparison method with standard power meter. |
Calibration Fee |
440 |
50 mW to 20 mW @ 633 nm |
Calibration Fee |
||||
441 |
50 mW to 3 mW @ 1310 nm Band |
Calibration Fee |
||||
442 |
50 mW to 10 mW @ 1550 nm Band |
Calibration Fee |
||||
443 |
09090-11114 |
Feedthrough Mount |
100 kHz to 18 GHz, 1 mW |
1.1% |
Calibration Fee |
|
444 |
RF Attenuator |
|
Calibration Fee |
|||
445 |
09090-11120 |
- Fix Attenuator |
10 MHz to 18 GHz, 10 dB to 80 dB |
As specification |
Calibration Fee |
|
446 |
09090-11121 |
- Step Attenuator |
10 MHz to 18 GHz, 10 dB to 80 dB |
As specification |
Calibration Fee |
|
447 |
09090-11122 |
RF Step Attenuator |
31.5 Hz to 100 kHz |
As Specification |
Calibration Fee |
|
448 |
09090-11140 |
EMC/RF Field Probe |
Frequency 10 MHz to 1 GHz |
0.5 dB |
Calibration Fee |
|
449 |
Field Strength 15 V/m to 60 V/m |
Calibration Fee |
||||
450 |
09090-11160 |
Oscilloscope |
As specification |
As specification |
Calibration Fee |
|
451 |
09090-11161 |
Spectrum Analyzer |
As specification |
As specification |
Calibration Fee |
|
452 |
09090-11162 |
Network Analyzer |
As specification |
As specification |
Calibration Fee |
|
453 |
09090-11163 |
Synthesizer Signal Generator |
Up to 225 MHz |
As specification |
Calibration Fee |
|
454 |
09090-11164 |
Function Generator |
As specification |
As specification |
Calibration Fee |
|
455 |
09090-11170 |
RF Signal Generator |
As specification |
As specification |
Excluded AM, FM and phase modulation. |
Calibration Fee |
456 |
09090-11171 |
Other of RF Microwave Equipment |
As specification |
As specification |
Calibration Fee |
|
457 |
09090-11172 |
RF Voltmeter |
10 MHz to 1 GHz |
As specification |
Calibration Fee |
|
458 |
09090-11173 |
RF Voltage Source |
As specification |
As specification |
Calibration Fee |
|
459 |
09090-11174 |
Directional Coupler |
100 MHz to 18 GHz |
As Specification |
Calibration Fee |
|
460 |
09110-11310 |
Calibrator |
DC Voltage : 0 V to 1 kV |
40 mV/V to 0.6 mV/V |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
461 |
09110-11310 |
Calibrator |
AC Voltage : 10 mV to 1 kV @ 10 Hz to 1 MHz |
3.03 mV/V to 20 mV/V |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
462 |
09110-11310 |
Calibrator |
AC Voltage : 30 V to 1 kV @ 10 Hz to 100 kHz |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
|
463 |
09110-11310 |
Calibrator |
DC Current : 0 A to 20 A |
150 mA/A to 4.5 mA/A |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
464 |
09110-11310 |
Calibrator |
AC Current : 100 mA to 20 A @ 10 Hz to 100 kHz |
1.1 mA/A to 65 mA/A |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
465 |
09110-11310 |
Calibrator |
Resistance : 0 W to 1 GW |
1.3 mW/W to 1.8 mW/W |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
466 |
09110-11311 |
Wideband Option |
Up to 30 MHz |
As specification |
3,000 THB/option for additional adjustment. |
Calibration Fee |
467 |
09110-11312 |
Power Option |
As specification |
As specification |
2,500 THB/option for additional adjustment. |
Calibration Fee |
468 |
09110-11313 |
Scope Option |
300 MHz |
As specification |
2,000 to 6,500 THB/option for additional adjustment. |
Calibration Fee |
469 |
09110-11314 |
Scope Option |
600 MHz to 1 GHz |
As specification |
2,000 to 6,500 THB/option for additional adjustment. |
Calibration Fee |
470 |
09110-11315 |
Oscilloscope Calibrator |
Up to 600 MHz |
As specification |
2,000 to 13,500 THB/item for additional adjustment. |
Calibration Fee |
471 |
09110-11316 |
Oscilloscope Calibrator |
Up to 2.1 GHz |
As specification |
2,000 to 13,500 THB/item for additional adjustment. |
Calibration Fee |
472 |
09110-11317 |
Amplifier / Precision Power Amplifier |
Up to 1kV 10 Hz up to 100 kHz |
As specification |
2,500 THB/function for additional adjustment. |
Calibration Fee |
473 |
09110-11320 |
Digital Multimeter |
6 1/2 digit |
As specification |
5,400 THB for additional adjustment. |
Calibration Fee |
474 |
09110-11321 |
Digital Multimeter |
7 1/2 digit |
As specification |
6,750 THB for aditional calibrate with AC/DC Shunt using direct measurement method |
Calibration Fee |
475 |
09110-11322 |
Digital Multimeter |
8 1/2 digit |
As specification |
6,750 THB for aditional calibrate with AC/DC Shunt using direct measurement method |
Calibration Fee |
476 |
09110-10120 |
Nano Voltmeter |
DC Voltage: 1 mV to 100 mV |
As specification |
2,500 THB for additional adjustment. |
Calibration Fee |
477 |
09080-10221 |
Frequency Source- Rubidium |
1 MHz, 5 MHz, |
? 1 x 10-12 |
Calibration Fee |
|
478 |
09080-10221 |
Frequency Source- Quartz, Others |
10 MHz, 1 PPS |
Calibration Fee |
||
479 |
09080-10231 |
Frequency Counter Timer Counter |
Up to 1 GHz |
1 x 10-8 to 1 x 10-6 |
Calibration Fee |
|
480 |
09080-10232 |
Frequency Meter |
10 kHz to 225 MHz |
3 x 10-13 to 5 x 10-10 |
Calibration Fee |
|
481 |
09080-10322 |
Tachometer |
As specification |
As specification |
Calibration Fee |
|
482 |
09080-10331 |
Stopwatch |
As specification |
As specification |
Calibration Fee |
|
483 |
09080-30212 |
Standard Frequency Source for Remote Frequncy Standard |
1 MHz, 5 MHz, 10 MHz |
? 1 x 10-12 |
On-site Calibration |
|
484 |
09010-10110 |
DC Voltage Standard |
1.018 V |
0.9 mV/V |
Calibration Fee |
|
485 |
09010-10110 |
DC Voltage Standard |
10 V |
0.4 mV/V |
Calibration Fee |
|
486 |
09010-10111 |
Standard Cell |
1 V / 1.018 V |
0.9 mV/V |
Calibration Fee |
|
487 |
09010-10112 |
DC Voltage Standard |
1 V / 1.018 V |
0.09 mV/V |
Compared against JJVS maintained by NIMT. |
Calibration Fee |
488 |
09010-10112 |
DC Voltage Standard |
10 V |
0.03 mV/V |
Compared against JJVS maintained by NIMT. |
Calibration Fee |
489 |
09030-10210 |
DC Standard Resistor |
1 kW |
0.14 mW/W |
Compared against QHR standard maintain by NIMT using automatic resistance bridge. |
Calibration Fee |
490 |
09030-10211 |
Standard Resistor 1 W |
1 W at 50 mA |
? 0.21 mW/W |
Used a group of 1 W standard. |
Calibration Fee |
491 |
09030-10212 |
Standard Resistor 10 kW |
10 kW at 0.3 mA |
? 1.4 mW/W |
Used a group of 10 kW standard. |
Calibration Fee |
492 |
09030-10213 |
Standard Resistor |
100 ?? at 200 A |
As Specification |
Used DCC bridge and 400 Amp range extender. |
Calibration Fee |
493 |
09030-10214 |
Standard Resistor (Calibrate in oil or in air) |
1 mW to 10 kW |
As specification |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
494 |
09030-10215 |
Standard Resistor (Calibrate in oil or in air) |
>10 kW to 1GW |
? 500 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
495 |
09030-10216 |
Standard Resistor (Calibrate in oil or in air) |
0 W to 1 TW |
As specification |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
496 |
09030-10217 |
Standard Resistor (Calibrate in oil or in air) |
10 TW at 100 V, 200 V |
3 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
497 |
09030-10217 |
Standard Resistor (Calibrate in oil or in air) |
500 V and 1000 V |
3 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
498 |
09030-10218 |
Decade Resistance Box |
1 mW to 10 MW |
As specification |
Calibration Fee |
|
499 |
09030-10219 |
Decade Resistance Box |
10 MW to 1 TW |
As specification |
Calibration Fee |
|
500 |
09031-10210 |
Resistance Calibrator |
0 W to 100 MW |
As specification |
Calibration Fee |
|
501 |
09030-10220 |
High Resistance Meter |
Up to 1 TW |
As specification |
Calibration Fee |
|
502 |
09030-10221 |
Digital Thermometer (indicator) |
up to 10 MW |
? 5 mW/W |
Calibration Fee |
|
503 |
09030-10222 |
|
? 5 mW/W |
Calibration Fee |
||
504 |
09010-10320 |
Picoampmeter |
2 pA to 200 mA |
5 mV/V to 0.1 mV/V |
Used volt-ampere method. |
Calibration Fee |
505 |
09010-10321 |
Electrometer |
2 nC to 200 ?C |
0.1 mV/V |
Calibration Fee |
|
506 |
09040-10410 |
AC Resistance |
1 W, 25 W, 100 W, 400 W at 60 Hz or 75 Hz |
As Specification |
Calibration Fee |
|
507 |
09040-10411 |
AC Resistor |
1 W to 100 kW @ 1000 Hz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
508 |
09040-10412 |
Additional Measurement at another Frequency |
1 W to 100 kW @ 100 Hz to 100 kHz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
509 |
09040-10413 |
Decade AC Resistor |
1 W to 100 kW @ 1000 Hz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
510 |
09040-10414 |
Additional Measurement at another Frequency |
1 W to 100 kW @ 100 Hz to 100 kHz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
511 |
09040-10420 |
Fixed, Fused Silica Dielectric Standard Capacitors |
10 pF @ 1000 Hz |
0.087 mF/F |
Comparing with a group of 10 pF standards |
Calibration Fee |
512 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
1 pF @ 1000 Hz |
0.71 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
513 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
10 pF @ 1000 Hz |
0.70 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
514 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
100 pF@ 1000 Hz |
0.70 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
515 |
09040-10422 |
Fixed Three Terminal, Nitrogen Dielectric Standard Capacitors |
10 pF 100 pF @ 1000 Hz and 1592 Hz |
1.2 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
516 |
09040-10422 |
Fixed Three Terminal, Nitrogen Dielectric Standard Capacitors |
1000 pF @ 1000 Hz and 1592 Hz |
3.5 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
517 |
09040-10423 |
Two or Three Terminal Mica Dielectric Standard Capacitors |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 1000 Hz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
518 |
09040-10424 |
Additional Measurement at another Frequency |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 100, 120, 200, 400, 500 Hz, 2 kHz, 5 kHz, 10 kHz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
519 |
09040-10425 |
Four-Terminal Pair Capacitance Standard |
1 pF, 10 pF, 100 pF, 1000 pF, 0.01 mF, 0.1 mF and 1 mF @ 1000 Hz |
> 0.12 mF/F |
Measured by precision capacitance bridge, direct measurement, at desired frequency. |
Calibration Fee |
520 |
09040-10426 |
Additional Measurement at another Frequency |
1 pF, 10 pF, 100 pF, 1000 pF, 0.01 mF, 0.1 mF and 1 mF @ 100 Hz to 100 kHz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
521 |
09040-10427 |
Fixed Standard Capacitors |
1 pF to 1 F @ 1000 Hz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
522 |
09040-10428 |
Additional Measurement at another Frequency |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
523 |
09040-10429 |
Decade capacitor |
1 pF to 10 mF @ 1000 Hz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
524 |
09041-10420 |
Decade capacitor |
1 pF to 1 F @ 1000 Hz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
525 |
09041-10421 |
Additional Measurement at another |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
526 |
09041-10422 |
Frequency |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
527 |
09041-10423 |
Precision Capacitance Bridge |
1 pF, 10 pF, 100 pF and 1000 pF @ 1000 Hz or 1592 Hz |
? 1 mF/F |
Calibrated by comparing its reading against the reference standard capacitors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement. |
Calibration Fee |
528 |
09040-10430 |
Fixed Standard Inductors |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 1000 Hz |
> 0.16 mH/H |
Measured by the direct substitution method with the reference standard inductors. |
Calibration Fee |
529 |
09040-10431 |
Additional Measurement at another Frequency |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 12 Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
530 |
09040-10432 |
Fixed standard Inductor |
1 mH to 10 H @ 1 kHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
531 |
09040-10433 |
Additional Measurement at another Frequency |
1 mH to 10 H @ 12 Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
532 |
09040-10434 |
Decade Inductors |
1 mH to 10 H @ 1000 Hz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
533 |
09040-10435 |
Additional Measurement at another Frequency |
1 mH to 10 H @ 12Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
534 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 100, 120, 200, 400, 500 Hz, 1 kHz, 2 kHz, 5 kHz, 10 kHz |
> 0.12 mF/F |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
535 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
1 pF, 10 pF, 100 pF, 1000 pF @ 1000 Hz* |
> 0.12 mF/F |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
536 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 1000 Hz |
> 0.16 mH/H |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
537 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
1 W, 10 W, 100 W, 1000 W @ 1 kHz |
> 0.20 mW/W |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
538 |
09020-10510 |
AC/DC Transfer Standard |
AC-DC Transfer Difference 2 mV to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
539 |
09020-10511 |
Thermal Transfer Standard |
AC-DC Transfer Difference 0.5 V to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
540 |
09020-10512 |
Thermal Voltage Converter Standard |
AC-DC Transfer Difference 0.5 V to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
541 |
09020-10520 |
AC Measurement Standard |
AC-DC Transfer Difference 10 mV to 20 V Frequency: 10 Hz to 1 MHz |
As specification |
Excluded WB option. |
Calibration Fee |
542 |
09020-10521 |
AC Measurement Standard |
AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
As specification |
Included WB option. |
Calibration Fee |
543 |
09020-10522 |
Alternating Voltage Measurement Standard |
AC Voltage Deviation 100 mV to 20 V Frequency: 10 Hz to 1 MHz |
14 mV/V to 0.35 mV/V |
Calibration Fee |
|
544 |
09020-10522 |
Alternating Voltage Measurement Standard |
AC Voltage Deviation > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
15 mV/V to 0.12 mV/V |
Calibration Fee |
|
545 |
09020-10560 |
AC Voltage Current Standard |
AC Voltage 100 mV to 1000V Frequency 60 Hz and 400 Hz |
55 mV/V to 6 mV/V |
Applied direct measurement method by AC measurement standard. |
Calibration Fee |
546 |
09020-10560 |
AC Voltage Current Standard |
AC Current 100 mA to 30 A Frequency 60 Hz and 400 Hz |
0.1 mA/A to 0.2 mA/A |
Applied direct measurement method by AC measurement standard. |
Calibration Fee |
547 |
09020-10561 |
Multifunction Transfer Standard |
As specification |
As specification |
Calibration Fee |
|
548 |
09020-10610 |
AC/DC Current Shunt |
AC-DC Transfer Difference 5 mA to 30 A Frequency: 10 Hz to 100 kHz |
As specification |
Calibration Fee |
|
549 |
09050-10710 |
Standard Watt Converter |
Volt : 600 V Current : 100 A AC Power : 60 kW Frequency : 50 Hz, 60 Hz Power Factor : + 0 to 1 |
> 55 mW/VA |
Calibration Fee |
|
550 |
09050-10711 |
AC Wattmeter, Digital Power Meter |
Volt : 1000 V Current : 80 A AC Power : 80 kW Frequency : 15 Hz to 450 Hz Power Factor : + 0 to 1 |
> 100 mW/VA |
Calibration Fee |
|
551 |
09050-10712 |
Energy Meter |
Eneregy 1.5 Ws to 3600 kWs Voltage 15 V to 600 V Current 0.1 A to 100 A Power Factor 1 to 0 (Inductive or Capacitive) Frequency 50 Hz to 60 Hz Measurement time 1s to 60 s |
? 100 mWh/ VAh |
Applied the known voltage,current and power from the AC power calibration system and measure pulse output against the time standard. |
Calibration Fee |
552 |
09050-10713 |
Electrical Power Source |
Power 1.5 W to 60 kW Frequency 50 Hz to 60 Hz Power Factor 1 to 0 (Inductive or Capacitive) |
Power ? 70 mW/VA |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
553 |
09050-10713 |
Electrical Power Source |
Voltage 3 V to 1000 V |
Voltage ? 30 mV/V |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
554 |
09050-10713 |
Electrical Power Source |
Current 0.05 A to 100 A |
Current ? 30 mA/A |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
555 |
09050-10713 |
Electrical Power Source |
Frequency 15 Hz to 6 kHz |
phase ? 0.005o |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
556 |
09050-10714 |
DC Power Meter |
Power: 1mW to 20 kW Voltage : 100 mV to 1000 V Current : 10 mA to 20 A |
? 40 mW/ W |
Applied the comparision method. |
Calibration Fee |
557 |
09050-10715 |
Energy Source |
Eneregy 41.67 mWh to 3.333 kWh Power: 0.5 W to 20 kW Voltage: 10 V to 1000 V Current: 0.05 A to 20 A Power Factor: 1 Time : 5 minute to 10 minute Frequency: 50 Hz to 60 Hz |
> 0.12 % |
Calibration Fee |
|
558 |
09050-10920 |
Phase Meter |
Phase Angle : 0.000o to + 360.000o Frequency : 15 Hz to 100 kHz Amplitde : 50 mVrms to 120 Vrms |
> 0.01o |
Calibration Fee |
|
559 |
09050-10921 |
Phase Source |
0.000o to 999.999o 50 mV to 120 Vrms 10 Hz to 100 kHz |
> 0.005 o |
Calibration Fee |
|
560 |
09050-10930 |
Power Analyzer, Harmonics and Flicker |
Output Voltage : 1020 V Output Current : 80 A Frequency : 20 Hz and up to 1 kHz Harmonics : 100th, up to 6 kHz Flicker : 16 Hz to 9 kHz |
Voltage > 100 mV/V Current > 150 mA/A Power > 200 mW/VA Frequency > 50 mHz/Hz |
Calibration Fee |
|
561 |
09050-10931 |
Power Ananlyzer, Dips/ Swells |
Voltage: 10 V to 1000 V Current Current : 0.05 A to 20A Dip/Swell amlitude : 10 % to 140 % of nominal amplitude Time : 1 ms to 1 minute Frequency : 16 Hz to 850 Hz |
? 0.07 % |
Calibration Fee |
|
562 |
09060-10810 |
DC High Voltage Divider |
-10 kV to 10 kV |
30 x 10-6 (Division Ratio) |
Compared against DC high voltage reference system. |
Calibration Fee |
563 |
09060-10811 |
DC High Voltage Divider |
>10 kV to 100 kV |
30 x 10-6 (Division Ratio) |
Compared against DC high voltage reference system. |
Calibration Fee |
564 |
09060-10812 |
DC High Voltage Source |
-10 kV to 100 kV |
30 mV/V |
Compared against DC high voltage reference system. |
Calibration Fee |
565 |
09060-10813 |
DC High Voltage Meter |
-10 kV to 100 kV |
As specification |
Compared against DC high voltage reference system. |
Calibration Fee |
566 |
09060-10820 |
High Voltage Capacitance & Dissipation Factor |
Capacitance 10 pF to 1000 pF Voltage:10 kV to 100 kV Frequency : 50 Hz Dissipation: 50 x 10-6 to 1 x 10-3 |
? 80 mF/F for Capacitance ? 50 x 10-6 for dissipation factor |
Compared against standard capacitor using AC high voltage capacitance and inductance bridge. |
Calibration Fee |
567 |
09060-10821 |
High Voltage Capacitance & Dissipation Factor |
Capacitance 10 pF to 1000 pF Voltage:10 kV to 200 kV Frequency : 50 Hz Dissipation: 50 x 10-6 to 1 x 10-3 |
Compared against standard capacitor using AC high voltage capacitance and inductance bridge. |
Calibration Fee |
|
568 |
09060-10830 |
AC High Voltage Divider |
1 kV to 200 kV @ 50 Hz |
? 0.4 % (Scale Factor) |
Compared against AC high voltage reference system. |
Calibration Fee |
569 |
09060-10831 |
AC High Voltage Meter |
1 kV to 200 kV @ 50 Hz |
As specification |
Compared against AC high voltage reference system. |
Calibration Fee |
570 |
09060-10832 |
AC High Voltage Source |
1 kV to 200 kV @ 50 Hz |
? 0.4 % |
Calibration Fee |
|
571 |
09060-10833 |
Voltage Transformers |
3.3 kV to 33 kV @ 50Hz/60 Hz |
? 0.01 % ratio error |
Compared against voltage transformer reference system. 850 THB for additional point |
Calibration Fee |
572 |
09060-10840 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
100 kV |
Scale factor ? 1.1 % |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
573 |
09060-10841 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
200 kV |
Time parameter ? 1.7 % |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
574 |
09060-10842 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
300 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
575 |
09060-10843 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
400 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
576 |
09060-10844 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
500 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
577 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
100 kV |
Scale factor ? 0.77 % |
Calibration Fee |
|
578 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
200 kV |
Time parameter ? 1.7 % |
Calibration Fee |
|
579 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
300 kV |
Calibration Fee |
||
580 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
400 kV |
Calibration Fee |
||
581 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
500 kV |
Calibration Fee |
||
582 |
09060-10860 |
Current Transformers |
5 A to 1500 A @ 50 Hz/60 Hz |
? 0.01 % ratio error ,less than 0.3 min phase displacement |
Compared against current transformer reference system. 850 THB for additional point |
Calibration Fee |
583 |
09070-11020 |
DC magnetic flux density /Reference magnet |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
584 |
09070-11020 |
DC magnetic flux density /Reference magnet |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
585 |
09070-11020 |
DC magnetic flux density /Reference magnet |
20 mT < B < 30 mT |
> 0.1 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
586 |
09070-11020 |
DC magnetic flux density /Reference magnet |
30 mT < B < 2.4 T |
> 0.1 % |
Calibration Fee |
|
587 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
588 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
589 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
20 mT < B < 30 mT |
> 0.1% |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
590 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
591 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
592 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
20 mT < B < 30 mT |
> 0.1 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
593 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
30 mT < B < 2.4 T |
> 0.08 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
594 |
09090-11110 |
Power Sensor |
100 kHz to 18 GHz, 1 mW |
1.1% |
Calibration Fee |
|
595 |
09090-11111 |
Power meter |
As specification |
As specification |
Calibration Fee |
|
596 |
09100-12400 |
Standard Optical Power Meter |
1 mW to 20 mW @ 488 nm,515 nm |
> 0.5 % |
Applied direct comparison method with standard calorimeter. |
Calibration Fee |
597 |
50 mW to 20 mW @ 633 nm |
Calibration Fee |
||||
598 |
50 mW to 3 mW @ 1310 nm Band |
Calibration Fee |
||||
599 |
50 mW to 10 mW @ 1550 nm Band |
Calibration Fee |
||||
600 |
09100-12401 |
Optical Power Meter |
1 mW to 20 mW @ 488nm,515nm |
> 0.7 % |
Applied direct comparison method with standard power meter. |
Calibration Fee |
601 |
50 mW to 20 mW @ 633 nm |
Calibration Fee |
||||
602 |
50 mW to 3 mW @ 1310 nm Band |
Calibration Fee |
||||
603 |
50 mW to 10 mW @ 1550 nm Band |
Calibration Fee |
||||
604 |
09090-11114 |
Feedthrough Mount |
100 kHz to 18 GHz, 1 mW |
1.1% |
Calibration Fee |
|
605 |
RF Attenuator |
|
Calibration Fee |
|||
606 |
09090-11120 |
- Fix Attenuator |
10 MHz to 18 GHz, 10 dB to 80 dB |
As specification |
Calibration Fee |
|
607 |
09090-11121 |
- Step Attenuator |
10 MHz to 18 GHz, 10 dB to 80 dB |
As specification |
Calibration Fee |
|
608 |
09090-11122 |
RF Step Attenuator |
31.5 Hz to 100 kHz |
As Specification |
Calibration Fee |
|
609 |
09090-11140 |
EMC/RF Field Probe |
Frequency 10 MHz to 1 GHz |
0.5 dB |
Calibration Fee |
|
610 |
Field Strength 15 V/m to 60 V/m |
Calibration Fee |
||||
611 |
09090-11160 |
Oscilloscope |
As specification |
As specification |
Calibration Fee |
|
612 |
09090-11161 |
Spectrum Analyzer |
As specification |
As specification |
Calibration Fee |
|
613 |
09090-11162 |
Network Analyzer |
As specification |
As specification |
Calibration Fee |
|
614 |
09090-11163 |
Synthesizer Signal Generator |
Up to 225 MHz |
As specification |
Calibration Fee |
|
615 |
09090-11164 |
Function Generator |
As specification |
As specification |
Calibration Fee |
|
616 |
09090-11170 |
RF Signal Generator |
As specification |
As specification |
Excluded AM, FM and phase modulation. |
Calibration Fee |
617 |
09090-11171 |
Other of RF Microwave Equipment |
As specification |
As specification |
Calibration Fee |
|
618 |
09090-11172 |
RF Voltmeter |
10 MHz to 1 GHz |
As specification |
Calibration Fee |
|
619 |
09090-11173 |
RF Voltage Source |
As specification |
As specification |
Calibration Fee |
|
620 |
09090-11174 |
Directional Coupler |
100 MHz to 18 GHz |
As Specification |
Calibration Fee |
|
621 |
09110-11310 |
Calibrator |
DC Voltage : 0 V to 1 kV |
40 mV/V to 0.6 mV/V |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
622 |
09110-11310 |
Calibrator |
AC Voltage : 10 mV to 1 kV @ 10 Hz to 1 MHz |
3.03 mV/V to 20 mV/V |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
623 |
09110-11310 |
Calibrator |
AC Voltage : 30 V to 1 kV @ 10 Hz to 100 kHz |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
|
624 |
09110-11310 |
Calibrator |
DC Current : 0 A to 20 A |
150 mA/A to 4.5 mA/A |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
625 |
09110-11310 |
Calibrator |
AC Current : 100 mA to 20 A @ 10 Hz to 100 kHz |
1.1 mA/A to 65 mA/A |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
626 |
09110-11310 |
Calibrator |
Resistance : 0 W to 1 GW |
1.3 mW/W to 1.8 mW/W |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
627 |
09110-11311 |
Wideband Option |
Up to 30 MHz |
As specification |
3,000 THB/option for additional adjustment. |
Calibration Fee |
628 |
09110-11312 |
Power Option |
As specification |
As specification |
2,500 THB/option for additional adjustment. |
Calibration Fee |
629 |
09110-11313 |
Scope Option |
300 MHz |
As specification |
2,000 to 6,500 THB/option for additional adjustment. |
Calibration Fee |
630 |
09110-11314 |
Scope Option |
600 MHz to 1 GHz |
As specification |
2,000 to 6,500 THB/option for additional adjustment. |
Calibration Fee |
631 |
09110-11315 |
Oscilloscope Calibrator |
Up to 600 MHz |
As specification |
2,000 to 13,500 THB/item for additional adjustment. |
Calibration Fee |
632 |
09110-11316 |
Oscilloscope Calibrator |
Up to 2.1 GHz |
As specification |
2,000 to 13,500 THB/item for additional adjustment. |
Calibration Fee |
633 |
09110-11317 |
Amplifier / Precision Power Amplifier |
Up to 1kV 10 Hz up to 100 kHz |
As specification |
2,500 THB/function for additional adjustment. |
Calibration Fee |
634 |
09110-11320 |
Digital Multimeter |
6 1/2 digit |
As specification |
5,400 THB for additional adjustment. |
Calibration Fee |
635 |
09110-11321 |
Digital Multimeter |
7 1/2 digit |
As specification |
6,750 THB for aditional calibrate with AC/DC Shunt using direct measurement method |
Calibration Fee |
636 |
09110-11322 |
Digital Multimeter |
8 1/2 digit |
As specification |
6,750 THB for aditional calibrate with AC/DC Shunt using direct measurement method |
Calibration Fee |
637 |
09110-10120 |
Nano Voltmeter |
DC Voltage: 1 mV to 100 mV |
As specification |
2,500 THB for additional adjustment. |
Calibration Fee |
638 |
09080-10221 |
Frequency Source- Rubidium |
1 MHz, 5 MHz, |
? 1 x 10-12 |
Calibration Fee |
|
639 |
09080-10221 |
Frequency Source- Quartz, Others |
10 MHz, 1 PPS |
Calibration Fee |
||
640 |
09080-10231 |
Frequency Counter Timer Counter |
Up to 1 GHz |
1 x 10-8 to 1 x 10-6 |
Calibration Fee |
|
641 |
09080-10232 |
Frequency Meter |
10 kHz to 225 MHz |
3 x 10-13 to 5 x 10-10 |
Calibration Fee |
|
642 |
09080-10322 |
Tachometer |
As specification |
As specification |
Calibration Fee |
|
643 |
09080-10331 |
Stopwatch |
As specification |
As specification |
Calibration Fee |
|
644 |
09080-30212 |
Standard Frequency Source for Remote Frequncy Standard |
1 MHz, 5 MHz, 10 MHz |
? 1 x 10-12 |
On-site Calibration |
|
645 |
09010-10110 |
DC Voltage Standard |
1.018 V |
0.9 mV/V |
Calibration Fee |
|
646 |
09010-10110 |
DC Voltage Standard |
10 V |
0.4 mV/V |
Calibration Fee |
|
647 |
09010-10111 |
Standard Cell |
1 V / 1.018 V |
0.9 mV/V |
Calibration Fee |
|
648 |
09010-10112 |
DC Voltage Standard |
1 V / 1.018 V |
0.09 mV/V |
Compared against JJVS maintained by NIMT. |
Calibration Fee |
649 |
09010-10112 |
DC Voltage Standard |
10 V |
0.03 mV/V |
Compared against JJVS maintained by NIMT. |
Calibration Fee |
650 |
09030-10210 |
DC Standard Resistor |
1 kW |
0.14 mW/W |
Compared against QHR standard maintain by NIMT using automatic resistance bridge. |
Calibration Fee |
651 |
09030-10211 |
Standard Resistor 1 W |
1 W at 50 mA |
? 0.21 mW/W |
Used a group of 1 W standard. |
Calibration Fee |
652 |
09030-10212 |
Standard Resistor 10 kW |
10 kW at 0.3 mA |
? 1.4 mW/W |
Used a group of 10 kW standard. |
Calibration Fee |
653 |
09030-10213 |
Standard Resistor |
100 ?? at 200 A |
As Specification |
Used DCC bridge and 400 Amp range extender. |
Calibration Fee |
654 |
09030-10214 |
Standard Resistor (Calibrate in oil or in air) |
1 mW to 10 kW |
As specification |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
655 |
09030-10215 |
Standard Resistor (Calibrate in oil or in air) |
>10 kW to 1GW |
? 500 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
656 |
09030-10216 |
Standard Resistor (Calibrate in oil or in air) |
0 W to 1 TW |
As specification |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
657 |
09030-10217 |
Standard Resistor (Calibrate in oil or in air) |
10 TW at 100 V, 200 V |
3 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
658 |
09030-10217 |
Standard Resistor (Calibrate in oil or in air) |
500 V and 1000 V |
3 mW/W |
Used DCC bridge and 100 Amp range extender. |
Calibration Fee |
659 |
09030-10218 |
Decade Resistance Box |
1 mW to 10 MW |
As specification |
Calibration Fee |
|
660 |
09030-10219 |
Decade Resistance Box |
10 MW to 1 TW |
As specification |
Calibration Fee |
|
661 |
09031-10210 |
Resistance Calibrator |
0 W to 100 MW |
As specification |
Calibration Fee |
|
662 |
09030-10220 |
High Resistance Meter |
Up to 1 TW |
As specification |
Calibration Fee |
|
663 |
09030-10221 |
Digital Thermometer (indicator) |
up to 10 MW |
? 5 mW/W |
Calibration Fee |
|
664 |
09030-10222 |
|
? 5 mW/W |
Calibration Fee |
||
665 |
09010-10320 |
Picoampmeter |
2 pA to 200 mA |
5 mV/V to 0.1 mV/V |
Used volt-ampere method. |
Calibration Fee |
666 |
09010-10321 |
Electrometer |
2 nC to 200 ?C |
0.1 mV/V |
Calibration Fee |
|
667 |
09040-10410 |
AC Resistance |
1 W, 25 W, 100 W, 400 W at 60 Hz or 75 Hz |
As Specification |
Calibration Fee |
|
668 |
09040-10411 |
AC Resistor |
1 W to 100 kW @ 1000 Hz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
669 |
09040-10412 |
Additional Measurement at another Frequency |
1 W to 100 kW @ 100 Hz to 100 kHz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
670 |
09040-10413 |
Decade AC Resistor |
1 W to 100 kW @ 1000 Hz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
671 |
09040-10414 |
Additional Measurement at another Frequency |
1 W to 100 kW @ 100 Hz to 100 kHz |
> 0.20 mW/W |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
672 |
09040-10420 |
Fixed, Fused Silica Dielectric Standard Capacitors |
10 pF @ 1000 Hz |
0.087 mF/F |
Comparing with a group of 10 pF standards |
Calibration Fee |
673 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
1 pF @ 1000 Hz |
0.71 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
674 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
10 pF @ 1000 Hz |
0.70 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
675 |
09040-10421 |
Fixed, Fused Silica Dielectric Standard Capacitors |
100 pF@ 1000 Hz |
0.70 mF/F |
Applied direct substitution method with the reference standard capacitors. |
Calibration Fee |
676 |
09040-10422 |
Fixed Three Terminal, Nitrogen Dielectric Standard Capacitors |
10 pF 100 pF @ 1000 Hz and 1592 Hz |
1.2 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
677 |
09040-10422 |
Fixed Three Terminal, Nitrogen Dielectric Standard Capacitors |
1000 pF @ 1000 Hz and 1592 Hz |
3.5 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
678 |
09040-10423 |
Two or Three Terminal Mica Dielectric Standard Capacitors |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 1000 Hz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
679 |
09040-10424 |
Additional Measurement at another Frequency |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 100, 120, 200, 400, 500 Hz, 2 kHz, 5 kHz, 10 kHz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
680 |
09040-10425 |
Four-Terminal Pair Capacitance Standard |
1 pF, 10 pF, 100 pF, 1000 pF, 0.01 mF, 0.1 mF and 1 mF @ 1000 Hz |
> 0.12 mF/F |
Measured by precision capacitance bridge, direct measurement, at desired frequency. |
Calibration Fee |
681 |
09040-10426 |
Additional Measurement at another Frequency |
1 pF, 10 pF, 100 pF, 1000 pF, 0.01 mF, 0.1 mF and 1 mF @ 100 Hz to 100 kHz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
682 |
09040-10427 |
Fixed Standard Capacitors |
1 pF to 1 F @ 1000 Hz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
683 |
09040-10428 |
Additional Measurement at another Frequency |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC Digibridge and/or Precision LCR Meter, direct measurement, at desired frequency. |
Calibration Fee |
684 |
09040-10429 |
Decade capacitor |
1 pF to 10 mF @ 1000 Hz |
> 0.12 mF/F |
Applied a null method using the basic ratio bridge. |
Calibration Fee |
685 |
09041-10420 |
Decade capacitor |
1 pF to 1 F @ 1000 Hz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
686 |
09041-10421 |
Additional Measurement at another |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
687 |
09041-10422 |
Frequency |
1 pF to 1 F @ 12 Hz to 1 MHz |
> 0.20 mF/F |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
688 |
09041-10423 |
Precision Capacitance Bridge |
1 pF, 10 pF, 100 pF and 1000 pF @ 1000 Hz or 1592 Hz |
? 1 mF/F |
Calibrated by comparing its reading against the reference standard capacitors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement. |
Calibration Fee |
689 |
09040-10430 |
Fixed Standard Inductors |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 1000 Hz |
> 0.16 mH/H |
Measured by the direct substitution method with the reference standard inductors. |
Calibration Fee |
690 |
09040-10431 |
Additional Measurement at another Frequency |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 12 Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
691 |
09040-10432 |
Fixed standard Inductor |
1 mH to 10 H @ 1 kHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
692 |
09040-10433 |
Additional Measurement at another Frequency |
1 mH to 10 H @ 12 Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurment, at desired frequencies. |
Calibration Fee |
693 |
09040-10434 |
Decade Inductors |
1 mH to 10 H @ 1000 Hz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
694 |
09040-10435 |
Additional Measurement at another Frequency |
1 mH to 10 H @ 12Hz to 1 MHz |
> 0.20 mH/H |
Measured by RLC digibridge and/or precision LCR meter, direct measurement, at desired frequencies. |
Calibration Fee |
695 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
0.001 mF, 0.01 mF, 0.1 mF and 1 mF @ 100, 120, 200, 400, 500 Hz, 1 kHz, 2 kHz, 5 kHz, 10 kHz |
> 0.12 mF/F |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
696 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
1 pF, 10 pF, 100 pF, 1000 pF @ 1000 Hz* |
> 0.12 mF/F |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
697 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
100 mH, 1 mH, 10 mH, 100 mH, 1 H and 10 H @ 1000 Hz |
> 0.16 mH/H |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
698 |
09040-10436 |
LCR Meter with 4 terminal pair configuration/without 4 terminal pair configuration |
1 W, 10 W, 100 W, 1000 W @ 1 kHz |
> 0.20 mW/W |
Calibrated by comparing its reading against the standard capacitors, standard inductors and standard resistors. The correction functions are used to correct additional error due to the test fixture and test leads before measurement.* For 4 terminal pair configuration |
Calibration Fee |
699 |
09020-10510 |
AC/DC Transfer Standard |
AC-DC Transfer Difference 2 mV to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
700 |
09020-10511 |
Thermal Transfer Standard |
AC-DC Transfer Difference 0.5 V to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
701 |
09020-10512 |
Thermal Voltage Converter Standard |
AC-DC Transfer Difference 0.5 V to 20 V Frequency: 10 Hz to 1 MHz AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
13 mV/V to 0.25 mV/V |
Calibration Fee |
|
702 |
09020-10520 |
AC Measurement Standard |
AC-DC Transfer Difference 10 mV to 20 V Frequency: 10 Hz to 1 MHz |
As specification |
Excluded WB option. |
Calibration Fee |
703 |
09020-10521 |
AC Measurement Standard |
AC-DC Transfer Difference > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
As specification |
Included WB option. |
Calibration Fee |
704 |
09020-10522 |
Alternating Voltage Measurement Standard |
AC Voltage Deviation 100 mV to 20 V Frequency: 10 Hz to 1 MHz |
14 mV/V to 0.35 mV/V |
Calibration Fee |
|
705 |
09020-10522 |
Alternating Voltage Measurement Standard |
AC Voltage Deviation > 20 V to 1000 V Frequency: 10 Hz to 100 kHz |
15 mV/V to 0.12 mV/V |
Calibration Fee |
|
706 |
09020-10560 |
AC Voltage Current Standard |
AC Voltage 100 mV to 1000V Frequency 60 Hz and 400 Hz |
55 mV/V to 6 mV/V |
Applied direct measurement method by AC measurement standard. |
Calibration Fee |
707 |
09020-10560 |
AC Voltage Current Standard |
AC Current 100 mA to 30 A Frequency 60 Hz and 400 Hz |
0.1 mA/A to 0.2 mA/A |
Applied direct measurement method by AC measurement standard. |
Calibration Fee |
708 |
09020-10561 |
Multifunction Transfer Standard |
As specification |
As specification |
Calibration Fee |
|
709 |
09020-10610 |
AC/DC Current Shunt |
AC-DC Transfer Difference 5 mA to 30 A Frequency: 10 Hz to 100 kHz |
As specification |
Calibration Fee |
|
710 |
09050-10710 |
Standard Watt Converter |
Volt : 600 V Current : 100 A AC Power : 60 kW Frequency : 50 Hz, 60 Hz Power Factor : + 0 to 1 |
> 55 mW/VA |
Calibration Fee |
|
711 |
09050-10711 |
AC Wattmeter, Digital Power Meter |
Volt : 1000 V Current : 80 A AC Power : 80 kW Frequency : 15 Hz to 450 Hz Power Factor : + 0 to 1 |
> 100 mW/VA |
Calibration Fee |
|
712 |
09050-10712 |
Energy Meter |
Eneregy 1.5 Ws to 3600 kWs Voltage 15 V to 600 V Current 0.1 A to 100 A Power Factor 1 to 0 (Inductive or Capacitive) Frequency 50 Hz to 60 Hz Measurement time 1s to 60 s |
? 100 mWh/ VAh |
Applied the known voltage,current and power from the AC power calibration system and measure pulse output against the time standard. |
Calibration Fee |
713 |
09050-10713 |
Electrical Power Source |
Power 1.5 W to 60 kW Frequency 50 Hz to 60 Hz Power Factor 1 to 0 (Inductive or Capacitive) |
Power ? 70 mW/VA |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
714 |
09050-10713 |
Electrical Power Source |
Voltage 3 V to 1000 V |
Voltage ? 30 mV/V |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
715 |
09050-10713 |
Electrical Power Source |
Current 0.05 A to 100 A |
Current ? 30 mA/A |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
716 |
09050-10713 |
Electrical Power Source |
Frequency 15 Hz to 6 kHz |
phase ? 0.005o |
Measured the AC currents, voltages phase and powers directly from the NIMT reference watt converter then measured the DC output voltage with high accuracy digitalmultimeter and phase meter. |
Calibration Fee |
717 |
09050-10714 |
DC Power Meter |
Power: 1mW to 20 kW Voltage : 100 mV to 1000 V Current : 10 mA to 20 A |
? 40 mW/ W |
Applied the comparision method. |
Calibration Fee |
718 |
09050-10715 |
Energy Source |
Eneregy 41.67 mWh to 3.333 kWh Power: 0.5 W to 20 kW Voltage: 10 V to 1000 V Current: 0.05 A to 20 A Power Factor: 1 Time : 5 minute to 10 minute Frequency: 50 Hz to 60 Hz |
> 0.12 % |
Calibration Fee |
|
719 |
09050-10920 |
Phase Meter |
Phase Angle : 0.000o to + 360.000o Frequency : 15 Hz to 100 kHz Amplitde : 50 mVrms to 120 Vrms |
> 0.01o |
Calibration Fee |
|
720 |
09050-10921 |
Phase Source |
0.000o to 999.999o 50 mV to 120 Vrms 10 Hz to 100 kHz |
> 0.005 o |
Calibration Fee |
|
721 |
09050-10930 |
Power Analyzer, Harmonics and Flicker |
Output Voltage : 1020 V Output Current : 80 A Frequency : 20 Hz and up to 1 kHz Harmonics : 100th, up to 6 kHz Flicker : 16 Hz to 9 kHz |
Voltage > 100 mV/V Current > 150 mA/A Power > 200 mW/VA Frequency > 50 mHz/Hz |
Calibration Fee |
|
722 |
09050-10931 |
Power Ananlyzer, Dips/ Swells |
Voltage: 10 V to 1000 V Current Current : 0.05 A to 20A Dip/Swell amlitude : 10 % to 140 % of nominal amplitude Time : 1 ms to 1 minute Frequency : 16 Hz to 850 Hz |
? 0.07 % |
Calibration Fee |
|
723 |
09060-10810 |
DC High Voltage Divider |
-10 kV to 10 kV |
30 x 10-6 (Division Ratio) |
Compared against DC high voltage reference system. |
Calibration Fee |
724 |
09060-10811 |
DC High Voltage Divider |
>10 kV to 100 kV |
30 x 10-6 (Division Ratio) |
Compared against DC high voltage reference system. |
Calibration Fee |
725 |
09060-10812 |
DC High Voltage Source |
-10 kV to 100 kV |
30 mV/V |
Compared against DC high voltage reference system. |
Calibration Fee |
726 |
09060-10813 |
DC High Voltage Meter |
-10 kV to 100 kV |
As specification |
Compared against DC high voltage reference system. |
Calibration Fee |
727 |
09060-10820 |
High Voltage Capacitance & Dissipation Factor |
Capacitance 10 pF to 1000 pF Voltage:10 kV to 100 kV Frequency : 50 Hz Dissipation: 50 x 10-6 to 1 x 10-3 |
? 80 mF/F for Capacitance ? 50 x 10-6 for dissipation factor |
Compared against standard capacitor using AC high voltage capacitance and inductance bridge. |
Calibration Fee |
728 |
09060-10821 |
High Voltage Capacitance & Dissipation Factor |
Capacitance 10 pF to 1000 pF Voltage:10 kV to 200 kV Frequency : 50 Hz Dissipation: 50 x 10-6 to 1 x 10-3 |
Compared against standard capacitor using AC high voltage capacitance and inductance bridge. |
Calibration Fee |
|
729 |
09060-10830 |
AC High Voltage Divider |
1 kV to 200 kV @ 50 Hz |
? 0.4 % (Scale Factor) |
Compared against AC high voltage reference system. |
Calibration Fee |
730 |
09060-10831 |
AC High Voltage Meter |
1 kV to 200 kV @ 50 Hz |
As specification |
Compared against AC high voltage reference system. |
Calibration Fee |
731 |
09060-10832 |
AC High Voltage Source |
1 kV to 200 kV @ 50 Hz |
? 0.4 % |
Calibration Fee |
|
732 |
09060-10833 |
Voltage Transformers |
3.3 kV to 33 kV @ 50Hz/60 Hz |
? 0.01 % ratio error |
Compared against voltage transformer reference system. 850 THB for additional point |
Calibration Fee |
733 |
09060-10840 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
100 kV |
Scale factor ? 1.1 % |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
734 |
09060-10841 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
200 kV |
Time parameter ? 1.7 % |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
735 |
09060-10842 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
300 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
736 |
09060-10843 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
400 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
737 |
09060-10844 |
Lightning Impulse Voltage Measuring system 1.2/50 ?s |
500 kV |
Additional fee for time to chopping (2.0 to 6.0 ) ms: 5,000 THB/point for MS rated < 200 kV, and 10,000 THB/ point for MS rated < 500 kV. |
Calibration Fee |
|
738 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
100 kV |
Scale factor ? 0.77 % |
Calibration Fee |
|
739 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
200 kV |
Time parameter ? 1.7 % |
Calibration Fee |
|
740 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
300 kV |
Calibration Fee |
||
741 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
400 kV |
Calibration Fee |
||
742 |
09060-10841 |
Switching Impluse Voltage Measuring system 250/2500 ?s |
500 kV |
Calibration Fee |
||
743 |
09060-10860 |
Current Transformers |
5 A to 1500 A @ 50 Hz/60 Hz |
? 0.01 % ratio error ,less than 0.3 min phase displacement |
Compared against current transformer reference system. 850 THB for additional point |
Calibration Fee |
744 |
09070-11020 |
DC magnetic flux density /Reference magnet |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
745 |
09070-11020 |
DC magnetic flux density /Reference magnet |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
746 |
09070-11020 |
DC magnetic flux density /Reference magnet |
20 mT < B < 30 mT |
> 0.1 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
747 |
09070-11020 |
DC magnetic flux density /Reference magnet |
30 mT < B < 2.4 T |
> 0.1 % |
Calibration Fee |
|
748 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
749 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
750 |
09070-11021 |
DC magnetic flux density / Magnetic field generator |
20 mT < B < 30 mT |
> 0.1% |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
751 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
0.1 mT < B < 5 mT |
> 0.8 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
752 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
5 mT < B < 20 mT |
> 0.2 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
753 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
20 mT < B < 30 mT |
> 0.1 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
754 |
09070-11022 |
DC magnetic flux density / Gauss / Tesla meter |
30 mT < B < 2.4 T |
> 0.08 % |
Compared with the standard maintained by NIMT Megnetic Laboratory. |
Calibration Fee |
755 |
09090-11110 |
Power Sensor |
100 kHz to 18 GHz, 1 mW |
1.1% |
Calibration Fee |
|
756 |
09090-11111 |
Power meter |
As specification |
As specification |
Calibration Fee |
|
757 |
09100-12400 |
Standard Optical Power Meter |
1 mW to 20 mW @ 488 nm,515 nm |
> 0.5 % |
Applied direct comparison method with standard calorimeter. |
Calibration Fee |
758 |
50 mW to 20 mW @ 633 nm |
Calibration Fee |
||||
759 |
50 mW to 3 mW @ 1310 nm Band |
Calibration Fee |
||||
760 |
50 mW to 10 mW @ 1550 nm Band |
Calibration Fee |
||||
761 |
09100-12401 |
Optical Power Meter |
1 mW to 20 mW @ 488nm,515nm |
> 0.7 % |
Applied direct comparison method with standard power meter. |
Calibration Fee |
762 |
50 mW to 20 mW @ 633 nm |
Calibration Fee |
||||
763 |
50 mW to 3 mW @ 1310 nm Band |
Calibration Fee |
||||
764 |
50 mW to 10 mW @ 1550 nm Band |
Calibration Fee |
||||
765 |
09090-11114 |
Feedthrough Mount |
100 kHz to 18 GHz, 1 mW |
1.1% |
Calibration Fee |
|
766 |
RF Attenuator |
|
Calibration Fee |
|||
767 |
09090-11120 |
- Fix Attenuator |
10 MHz to 18 GHz, 10 dB to 80 dB |
As specification |
Calibration Fee |
|
768 |
09090-11121 |
- Step Attenuator |
10 MHz to 18 GHz, 10 dB to 80 dB |
As specification |
Calibration Fee |
|
769 |
09090-11122 |
RF Step Attenuator |
31.5 Hz to 100 kHz |
As Specification |
Calibration Fee |
|
770 |
09090-11140 |
EMC/RF Field Probe |
Frequency 10 MHz to 1 GHz |
0.5 dB |
Calibration Fee |
|
771 |
Field Strength 15 V/m to 60 V/m |
Calibration Fee |
||||
772 |
09090-11160 |
Oscilloscope |
As specification |
As specification |
Calibration Fee |
|
773 |
09090-11161 |
Spectrum Analyzer |
As specification |
As specification |
Calibration Fee |
|
774 |
09090-11162 |
Network Analyzer |
As specification |
As specification |
Calibration Fee |
|
775 |
09090-11163 |
Synthesizer Signal Generator |
Up to 225 MHz |
As specification |
Calibration Fee |
|
776 |
09090-11164 |
Function Generator |
As specification |
As specification |
Calibration Fee |
|
777 |
09090-11170 |
RF Signal Generator |
As specification |
As specification |
Excluded AM, FM and phase modulation. |
Calibration Fee |
778 |
09090-11171 |
Other of RF Microwave Equipment |
As specification |
As specification |
Calibration Fee |
|
779 |
09090-11172 |
RF Voltmeter |
10 MHz to 1 GHz |
As specification |
Calibration Fee |
|
780 |
09090-11173 |
RF Voltage Source |
As specification |
As specification |
Calibration Fee |
|
781 |
09090-11174 |
Directional Coupler |
100 MHz to 18 GHz |
As Specification |
Calibration Fee |
|
782 |
09110-11310 |
Calibrator |
DC Voltage : 0 V to 1 kV |
40 mV/V to 0.6 mV/V |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
783 |
09110-11310 |
Calibrator |
AC Voltage : 10 mV to 1 kV @ 10 Hz to 1 MHz |
3.03 mV/V to 20 mV/V |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
784 |
09110-11310 |
Calibrator |
AC Voltage : 30 V to 1 kV @ 10 Hz to 100 kHz |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
|
785 |
09110-11310 |
Calibrator |
DC Current : 0 A to 20 A |
150 mA/A to 4.5 mA/A |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
786 |
09110-11310 |
Calibrator |
AC Current : 100 mA to 20 A @ 10 Hz to 100 kHz |
1.1 mA/A to 65 mA/A |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
787 |
09110-11310 |
Calibrator |
Resistance : 0 W to 1 GW |
1.3 mW/W to 1.8 mW/W |
2,000 to 9,000 THB/item for additional adjustment. |
Calibration Fee |
788 |
09110-11311 |
Wideband Option |
Up to 30 MHz |
As specification |
3,000 THB/option for additional adjustment. |
Calibration Fee |
789 |
09110-11312 |
Power Option |
As specification |
As specification |
2,500 THB/option for additional adjustment. |
Calibration Fee |
790 |
09110-11313 |
Scope Option |
300 MHz |
As specification |
2,000 to 6,500 THB/option for additional adjustment. |
Calibration Fee |
791 |
09110-11314 |
Scope Option |
600 MHz to 1 GHz |
As specification |
2,000 to 6,500 THB/option for additional adjustment. |
Calibration Fee |
792 |
09110-11315 |
Oscilloscope Calibrator |
Up to 600 MHz |
As specification |
2,000 to 13,500 THB/item for additional adjustment. |
Calibration Fee |
793 |
09110-11316 |
Oscilloscope Calibrator |
Up to 2.1 GHz |
As specification |
2,000 to 13,500 THB/item for additional adjustment. |
Calibration Fee |
794 |
09110-11317 |
Amplifier / Precision Power Amplifier |
Up to 1kV 10 Hz up to 100 kHz |
As specification |
2,500 THB/function for additional adjustment. |
Calibration Fee |
795 |
09110-11320 |
Digital Multimeter |
6 1/2 digit |
As specification |
5,400 THB for additional adjustment. |
Calibration Fee |
796 |
09110-11321 |
Digital Multimeter |
7 1/2 digit |
As specification |
6,750 THB for aditional calibrate with AC/DC Shunt using direct measurement method |
Calibration Fee |
797 |
09110-11322 |
Digital Multimeter |
8 1/2 digit |
As specification |
6,750 THB for aditional calibrate with AC/DC Shunt using direct measurement method |
Calibration Fee |
798 |
09110-10120 |
Nano Voltmeter |
DC Voltage: 1 mV to 100 mV |
As specification |
2,500 THB for additional adjustment. |
Calibration Fee |
799 |
09080-10221 |
Frequency Source- Rubidium |
1 MHz, 5 MHz, |
? 1 x 10-12 |
Calibration Fee |
|
800 |
09080-10221 |
Frequency Source- Quartz, Others |
10 MHz, 1 PPS |
Calibration Fee |
||
801 |
09080-10231 |
Frequency Counter Timer Counter |
Up to 1 GHz |
1 x 10-8 to 1 x 10-6 |
Calibration Fee |
|
802 |
09080-10232 |
Frequency Meter |
10 kHz to 225 MHz |
3 x 10-13 to 5 x 10-10 |
Calibration Fee |
|
803 |
09080-10322 |
Tachometer |
As specification |
As specification |
Calibration Fee |
|
804 |
09080-10331 |
Stopwatch |
As specification |
As specification |
Calibration Fee |
|
805 |
09080-30212 |
Standard Frequency Source for Remote Frequncy Standard |
1 MHz, 5 MHz, 10 MHz |
? 1 x 10-12 |
On-site Calibration |